한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

클럽 샤프트(Club Shaft) 특성에 따른 골프 스윙(Golf Swing)동작 분석

김성일,김기형,김형수,이현섭,김진욱,안찬규,김희진 한국운동역학회 2002 한국운동역학회지 Vol.12 No.2

본 연구는 클럽 샤프트의 대표적인 재질인 그라파이트(graphite)의 유연한(flexible) 클럽 샤프트(club shaft)의 특성에 따라 피험자가 운동학적(kinematics) 요인이 되는 관절의 각변위, 각속도, 각가속도, 클럽헤드의 속도와 가속도와 같은 변인들이 어떻게 적응하는지 비교 분석하여 보다 효율적인 드라이버 선택에 도움을 주며 샤프트 특성에 따른 신체관절의 움직임에 대한 자료를 제시하고자 하였다. 고속 카메라 2대의 속도는 500fps로 하였고 각 regylar,stiff, x-stiff, 자신의 클럽을 포함 각 4개의 클럽을 사용하여 각 클럽당 3번씩 촬영하였으며 목표방향에서 20m이상 벗어나는 경우의 촬영은 다시 촬영하였다. 본 연구에서는 디지타이징(digitizing)을 신체 9개 마커는 강체로 가정된 클럽과 신체분절 모델로 정의하였으며 2 대의 카메라(500fps)로부터 얻은 avi화일을 컴퓨터에 저장하고 자료로부터 Butterworth 6th order recursive digital filter를 사용하여 1차 자료를 smoothing 하고 DLT를 이용하여 3차원 좌표를 구성하도록 한다. 좌표값을 얻기 위하여 kwon3d v3.0을 이용하였다. 본 실험은 피험자 스스로 클럽의 특성에 따라 스윙의 속도를 달리 하기 때문에 스윙의 시간이 달라지며 어느 정도 클럽이 강성에 따라 스윙시간이 빨라지는 결과로 나타났다. 이것은 피험자가 샤프트가 강성(stiffness)에 따라 스윙 속도를 빨리 하게 되는 원인이 되는 것으로 생각된다. 어깨의 각변위는 클럽이 regular의 경우 임팩트에서 각속도를 계속 유지하고 있으며 stiff, x-stiff의 경우에는 어깨의 움직임이 임팩트에서 급격하게 감소되는 것을 알 수 있다. 이것은 팔의 동작과 클럽의 힘을 크게 하기 위한 동작으로 생각된다. 어깨 각속도는 클럽이 stiff할수록 각속도가 큰 감속하는 것으로 나타났다. 손목속도는 regular 클럽의 경우 손목의 감속이 늦게 되고 임팩트에서 손목의 감속이 적게 하는 것으로 나타났으며 stiff와 x-stiff의 클럽에서 임팩트 시에 순간적인 감가속으로 인해 클럽의 속도를 증가시키고 있다. 임팩트 시에 손목의 감가속은 클럽헤드의 임팩트 시 속도를 증가시키는 결과를 보였다. 클럽헤드는 regular 클럽이 임팩트전에는 속도 증가가 커지는 결과와 일치된 결과를 보이고 있다. The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.

난치성 전두엽 간질의 외과적 치료

김정목,김형일,김근수,김철진,이정청,이민철 대한신경외과학회 1996 Journal of Korean neurosurgical society Vol.25 No.11

Recent advances of neuroimaging and electrophysiological monitoring technique have contributed in improving the surgical outcome of frontal lobe epilepsy. The authors have analysed 36 consecutive cases of intractable frontal lobe epilepsy that were treated at our institute between September. 1992 and December, 1995 to determine the clinical, electrophysiological, and neuroimaging characteristics as well as to delineate the efficacy of surgical treatment in improving the seizure outcome. The patients consisted of 19 males and 17 females. The mean age of the seizure onset and the mean duration of epilepsy were 14.9 and 11.6 years, respectively. Magnetic resonance imaging(MRI) showed no lesion in 9 patients and pathological lesions in 27 patients. The types of the lesions observed included primary brain tumor, mostly low-grade glioma in 10 patients, cortical dysplasia in 4, posttraumatic scar in 4, neocortical gliosis in 3, cyst in 3, and postencephalitic atrophy in 3. Intracranial recordings were performed in 23 cases to determine the epileptogenic zone. The surgical outcome was graded according to Engle’s Classification as Class A in 20 patients. Class B in 2, Class C in 9, and Class D in 5. The surgical outcome was promising regardless of the presence or the absence of the lesion on MRI, invasive recording, age of seizure onset, and duration of epilepsy.

Lidocaine, Thrombin, Epinephrine 의 항균효과

김진우,이동건,전혜선,김승준,김석찬,안중현,김치홍,권순석,김영균,김관형,문화식,신완식,송정섭,박성학 대한감염학회 2005 감염과 화학요법 Vol.37 No.6

목적 : 기관지내시경 검사에서 흔히 사용되는 국소마취제인 lidocaine과 내시경시 지혈목적으로 사용되는 thrombin과 epinephrine이 각종 균주에 미치는 항균효과에 대해 알아보고자 하였다. 재료 및 방법 : 균주는 가톨릭대학교 성모병원에서 2004년 3월부터 2004년 9월까지 임상검체 에서 동정된 S. aureus, S. pneumoniae, K. pneumoniae, P. aeruginosa 각각 42, 42, 42, 43주를 대상으로 하였다. Lidocaine, thrombin, epinephrine 감수성 검사는 National Committee for Clinical Laboratory Standards (NCCLS, 2002)의 기준에 따랐다. 결과 : Lidocaine은 S. aureus, S. pneumoniae, P. aeruginosa에서 MIC_(50), MIC_(90) 모두 20,000 ㎍/mL 이었다. K. pneumoniae는 각각 10,000 ㎍/mL이었다. Thrombin은 S. aureus와 P. aeruginosa에서 MIC50 500 lU/mL 과 MIC_(90) 500 IU/mL 이상이었고, K. pneumoniae에서는 MIC_(50)과 MIC_(90)이 모두 500 lU/mL이상이었으나 S. pneumoniae에서는 MIC_(50)과 MIC_(90)은 125 IU/mL이었다. Epinephrine은 K. pneumoniae, S. pneumoniae에 대한 MIC_(50), MIC_(90)가 모두 >500 ㎍/mL이었고, S. aureus와 P. aeruginosa에 대한 MIC_(50), MIC_(90)가 모두 500 ㎍/mL이었다. 결론 : 기관지 내시경 검사에서 흔히 쓰이는 lidocaine, thrombin, epinephrine 등의 약제들이 호흡기 질환의 흔한 병원균인 S. aureus, S. pneumoniae, K. pneumoniae, P. aeruginosa 균주들에 대해 항균 효과가 있을 수 있어 세균배양검사에 영향을 미칠 수 있겠다. Background : We performed this stody to find out about antimicrobial effect of lidocaine which is commonly used local anesthetic, and thrombin and epinephrine used for hemostasis during bronchoscopic procedures. Materials and Methods : The microorganisms that were cultured from specimens obtained during bronchoscopy were Staphylococcus aureus (n=42), Streptococcus pneumoniae (n=42), Klebsiella pneumoniae (n=42), and Pseudomonas aeruginosa (n=43) collected from St. Mary's Hospital, from March to Sep 2004 were used for susceptibity testing. Susceptibility to lidocaine, thrombin, and epinephrine were tested according to the National Committee for Clinical Laboratory Standards. Result : MIC_(50) and MIC_(90) of lidocaine for S. aureus, S. pneumoniae, P. aeruginosa were all 20,000 ㎍/mL and that for K. pneumoniae were 10,000 ㎍/mL. MIC_(50) and MIC_(90) of thrombin for both S. aureus and P. aeruginosa was 500 IU/mL and above 500 IU/mL, respectively; that for K. pneumoniae were all above 500 IU/mL and for S. pneumoniae they were 125 IU/mL, MIC_(50) and MIC_(90) of epinephrine for K. pneumoniae and S. pneumoniae were above 500 ㎍/mL; that for S. aureus and P. aeruginosa were 500 ㎍/mL. Conclusion : We observed possible antimicrobial effect of lidocaine, thrombin, and epinephrine in vitro against pathogens such as S. aureus, S. pneumoniae, K. pneumoniae, P. aeruginosa, which are common respiratory microorganisms. The use of these agants could affect the result of bacterial culture.

기어의 백래쉬를 고려한 승용차 조향계의 동특성 연구

김종관,김경석,송상기,정진형 한국공작기계학회 1996 한국생산제조학회지 Vol.5 No.3

The problem related to the rotational vibration at steering wheel end of passenger cars during high speed driving is investigated. To analyze vibration of steering wheel, a steering system of passenger car is modelled in twelve degrees of freedom including backlash effect of rack and pinion gear system. The one degree of freedom system with backlash in investigated by the analytical method . Consequently the skeleton curve and the frequency response curves are computed. The steering system is analyzed by the numerical simulation using the 4th order Runge-Kutta method, the obtained results are compared with the experimental data. Also the effects of the change of rack gear tooth stiffness and backlash on the acceleration level of steering wheel are investigated. As a result, it can be found that the acceleration level of steering wheel becames lower as the rack gear tooth stiffness becames higer, and that acceleration level becames high as the magnitude of backlash between rack and pinion gear increase.

한국인 배자 및 태아에서 유치 발생의 조직학적 변화

김희진,임희식,최병재,오현주,박형우 大韓小兒齒科學會 1998 大韓小兒齒科學會誌 Vol.25 No.2

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is need to establish a standard timetable of early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. the results are as follows : 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

고상 에피텍시 성장을 이용한 elevated source/drain 공정연구

金湘薰,崔在植,崔圭鎭,金亨駿 弘益大學校 科學基術硏究所 1999 科學技術硏究論文集 Vol.10 No.2

Recently, semiconductor devices require the ultrashallow junctions and low leakage current. Self-implantation to make preamorphization prevents channeling and minimizes junction depth. But in this way, implantation with high energy makes defects like dislocation loop in depletion region and interface between amorphous silicon and silicon wafer. But solid phase epitaxy using low pressure chemical vapor deposition prevents channeling, allows the easy control of junction depth by amorphous layer thickness, and improves the conventional processes. Amorphous silicon films in source and drain by LPCVD are elevated from the Si substrate. This structure is called "elevated source/drain". The elevated source/drain process improves metal contact and simplify the fabrication process. Usually, the amorphously-deposited Si films by chemical vapor deposition are crystallized to polycrystalline films due to a formation of SiO₂layer at the amorphous Si/Si substrates interfaces. Formation of SiO₂layer on Si surface can be effectively prevented by flowing the Si₂H?? gas during the heating-up procedure for amorphous Si depositions. In this way, amorphously deposited Si layer onto (100) Si substrates was grown epitaxially during the post-deposition heat treatments. The suppression of surface SiO₂can be explained in terms of adsorption of SiHx adspecies, instead of oxygen from residual gases in the reactors, to Si surfaces after desorption of hydrogen from H-passivated Si surfaces. Employing Si₂H?? flowing and solid phase epitaxial growth, high-quality epitaxial Si layer was obtained at low temperatures below 500℃ without conventional high temperature cleaning procedures. Amorphous Si films on Si substrate are epitaxially grown and amorphous Si films on SiO₂layer remain as amorphous with proper heat treatments. Uncrystallized amorphous Si films on SiO₂layer can be selectively etched using the HNO₃/HF/HNO₃/CH₃COOH solution with proper mixing ratio and elevated source/drain regions were formed.

하우스 밴드의 설치방법 개발

김진환,김형준,유복상 충북대학교 농업과학기술연구소 2001 農業科學硏究 Vol.18 No.-

Labor saving, simple and fast instration of hawse band is necessary for house management. Therefore, this study was conducted to evaluate the cord materials(rice transplsnting string, pack sack band and drip irrigation nozzle and house band) and installation methods(string exchange, both side throwing, ball throwing and and both side throwing) of house band. Both side throwing + Ball throwing) of house band. Both side throwing of drip irrigation nozzle appeared to be the fatest method for house band installation. Attachment of tennis ball of 160∼ 180g at the both end of drip irrigation nozzle enabled fast band installation in both side throwing and only one man is able to install the house band

배열형 전력 MOSFET의 설계 및 제작

김진형,최연익,정상구,박찬광,김충기,성만영 亞洲大學校 1987 論文集 Vol.10 No.-

In this paper, the design of the array type power MOSFETs is discussed in terms of on-resistance, breakdown voltage, placement of FLRs(field limiting ring) and threshold voltage. Also, 9-cell(square-on square grid) VDMOSs are fabricated to confirm the feasibility of the design method. Existence of optimum p-well spacing for minimum on-resistance, which is anticipated by the theoretical results is confirmed by the experiment of the fabricated power MOSFETs. Breakdown voltage of power MOSFET is upgraded by using two FLR's and their optimum placement is determined from the experimental results of the diodes with FLRs. The threshold voltage is controlled by the ion implantation within the design specification. Experimental results are in good agreement with the design specification. Experimental results are in good agreement with the design values. Characteristics of the fabricated power MOSFETs are 190Ω in on-resistance, 270V in breakdown voltage and 2.9V in thershold voltage.

부산 백세인 특성

김윤진,이정규,박형숙,김동희,손용진 부산대학교 병원 암연구소 2008 부산대병원학술지 Vol.- No.23

Purpose: The proportion of centenarians has been increasing in many parts of the world, and the issues of longevity has been the subject of the research concern in recent years. We has conducted the first study with centenarians in Busan, 2006 and this is a follow-up study for prospective research of centenarians in Busan. Methods: The demographic database of Busan Centenarian Study existing in 2006 wasutilized for our studies. Twenty-five centenarians or a proxy were contacted and eight individuals agreed to have a direct interview using a questionnaire. Data were collected from May to June 2007. Results: Of the 2Scentenarians, 2(8%)were men and 23(92 %) were women. The average age was 101.3 years and the highest one was 106 years of age. The majority of the centenarians were living with family, most of those were living with their sons. Among 8 visited centenarians, there were 2 drinkers(2S%) but no one was smoking. Among them, 7 centenarians (87.5%) had regular eating pattern and, 3 centenarians(37.5%) participated social activities. Conclusions: The centenarian in Busan is likely to be healthy and they are living with their family. The centenarians study in Busan has important meaning to understand the health of centenarians.