http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유리의 미세 가공을 위한 구리 전극군의 제작과 전기 화학 방전 가공 시험
정주명,심우영,정옥찬,양상식 대한전기학회 2004 전기학회논문지C Vol.53 No.9(C)
In this paper, we present the fabrication of copper electrode array and test of electrochemical discharge machining(ECDM) for glass machining. An array of 72 Cu electrodes is used to machine Borofloat33 glass. The height and diameter of a Cu electrode are 400 ㎛ and 100 ㎛ respectively. It is fabricated by ICP-RIE, Au-Au thermo-compression bonding, and copper electroplating. Borofloat33 glass is machined by the fabricated copper electrode array in 60 seconds at 55 V. The surface roughness of the machined glass is measured and the machined glass is anodically bonded with silicon.
무선통신망 기반 어구자동식별 모니터링 시스템 구현 및 시험환경 구축
정주명(JooMyeong Joung),박혜정(HyeJung Park),김민석(MinSeok Kim),곽명신(Myoung-Shin Kwak),선휘준(Hwi-Joon Seon) 한국전기전자학회 2021 전기전자학회논문지 Vol.25 No.1
불법어업 방지와 유실어구 저감을 위해 해양환경에서 상시적이고 연속적인 어구 모니터링 시스템 개발이 필요하며, 본 논문에서는 수산자원 고갈로 점차 어로활동 범위가 넓어지는 현실과 열악한 해상환경을 고려한 25Km 이상의 통신 커버리지를 갖는 장기적 운용 가능한 신뢰성 있는 시스템 모델을 설계하고, 설계결과를 구현하여 14Km 떨어진 해상환경에 부이와 무선노드를 각각 설치하여 상용망과 Private LoRa망을 통한 통신 성공률을 구분 확인하고 수집된 위치정보를 통한 각 관제시스템의 관제기능을 확인함으로써 시스템의 운용 가능성을 검증하였다. In order to prevent illegal fishing and reduce lost fishing gear, it is necessary to develop a constant and continuous fishing gear monitoring system in the marine environment. In this paper, we design a long-term operational, reliable system model with communication coverage of more than 25Km considering the reality of gradually expanding fishing activity due to the depletion of fishery resources and marine environments. The design results are implemented to verify the operability of the system by separating the communication success rate of SKT and private LoRa networks and verifying the control function of each control system through the collected location information, respectively.
어구 자동식별 모니터링시스템의 해상IoT 통신시험 및 성능 분석
박혜정(HyeJung Park),정주명(JooMyeong Joung),스타핏 프라네시(Sthapit Pranesh),김민석(MinSeok Kim),김기선(Kiseon Kim) 한국전기전자학회 2020 전기전자학회논문지 Vol.24 No.4
본 논문에서는 폐어구의 체계적 관리를 위해 개발 중인 어구 자동식별 모니터링 시스템의 신뢰성을 확인코자 서해어업관리단의 어업지도선에 승선하여 해상에서 시제품의 기능별 동작확인과 통신 시험을 진행하였다. 또한 수집 데이터를 분석하여 어구 자동식별 모니터링 시스템에서 활용되는 LoRa통신망에 대한 해상에서의 신뢰성을 확인하고 시스템의 안정성을 검토하고자 하였다. This paper presents the performance analysis of a long-range marine communication system developed for monitoring the fishing gears. LoRa based buoys were developed to monitor fishing gears. The buoy sends its coordinates along with other relevant information to the central monitoring station via a gateway. During the experiment, a up to 30 km of communication between a buoy and a gateway was successfully tested.
연안자망 부이에 어구자동식별 장치 설치방안에 관한 기초적 연구
허남희,강경범,구명성,김근형,김종범,좌민석,김준택,정주명,김병엽,김석종 한국수산해양기술학회 2019 수산해양기술연구 Vol.55 No.4
As a series of fundamental researches on the development of an automatic identification monitoring system for fishing gear. Firstly, the study on the installation method of automated identification buoy for the coastal improvement net fishing net with many loss problems on the west coast was carried out. Secondly, the study was conducted find out how to install an automatic identification buoy for coastal gill net which has the highest loss rate among the fisheries. GPS for fishing was used six times in the coastal waters around Seogwipo city in Jeju Island to determine the developmental status and underwater behavior to conduct a field survey. Next, a questionnaire was administered in parallel on the type of loss and the quantity and location of fishing gear to be developed and the water transmitter. In the field experiment, the data collection was possible from a minimum of 13 hours, ten minutes to a maximum of 20 hours and ten minutes using GPS, identifying the development status and underwater behavior of the coastal gillnet fishing gear. The result of the survey showed that the loss of coastal net fishing gear was in the following order: net (27.3%), full fishing gear (24.2%), buoys, and anchors (18.2%). The causes were active algae (50.0%), fish catches (33.3%) and natural disasters (12.5%). To solve this problem, the installation method is to attach one and two electronic buoys to top of each end of the fishing gear, and one underwater transmitter at both ends of the float line connected to the anchor. By identifying and managing abnormal conditions such as damage or loss of fishing gear due to external factors such as potent algae and cutting of fishing gear, loss of fishing gear can be reduced. If the lost fishing gear is found, it will be efficiently collected. 이 연구는 어구자동식별 모니터링 시스템 개발에 관한 일련의 기초적인 연구로써, 1차적으로 서해안에서 유실문제가 많은 연안개량안강망 어구에 대한 어구자동식별 부이의 설치방안에 관한 연구를 수행하였고, 2차적으로 연안어업 중에서 유실률이 가장 높은 연안고정자망 어구를 대상으로 어구자동식별 부이의 설치방안을 강구하기 위하여 제주도 서귀포시 주변 연안 해역을 중심으로 6차례 조업용 어구에 GPS를 이용하여 부설전개상태와 수중의 거동을 파악하기 위한 현장실험을 실시하였고, 다음으로 어구의 유실형태 및 개발될 부이와 수중발신기의 수량 및 부착위치에 대하여 설문조사를 병행하여 조사하였다. 현장실험에서는 GPS를 이용한 데이터 수집을 최저13시간 10분에서 최대 20시간 10분까지 가능하였고 기초적인 연안고정자망 어구의 부설전개상태의 수중거동을 파악 할 수 있었다. 설문조사의 결과에서는 연안자망 어구의 유실은 망지(27.3%), 어구전체(24.2%) 및 부표(부이),닻(멍)(18.2%)순으로 유실된다고 나타났는데, 그 원인은 강한 조류(50.0%),어구절단(33,3%) 및 자연재해(12.5%) 순으로 응답했다. 이를 해결하기 위하여 어구자동식별 장치의 설치방안은 전자부이를 연안자망 어구의 양 끝단의 부표상부에 각각 1개씩 총 2개를 부착하고, 수중발신기는 닻과 연결된 뜸줄부 끝단에 각각 1개씩 총 2개를 부착함으로써, 강한 조류와 어구의 절단 등 외부적인 요인으로 인한 어구의 파손이나 유실 등의 이상상태를 실시간으로 확인하고 관리할 수 있게 함으로써 어구의 유실을 줄일 수 있고 유실어구가 발생할 경우에는 효율적으로 수거될 것으로 판단된다.