Micrococcineae에 속하는 식물 연관 방선균

김태수,한지혜,김승범 충남대학교 생물공학연구소 2012 생물공학연구지 Vol.18 No.-

장기간 항갑상선제 투여 후 임의 중단 뒤 재복용시 발생한 무과립구증 1 예

김승만;김태영;박수영;배영환;서영경 정은주;김태균;권민정;박정현;이순희 인제대학교 2011 仁濟醫學 Vol.32 No.-

Agranulocytosis, one of the major side effects of antithyroid a gents, probably occurs in less than 0.25% of cases treated with antithyroid agents. It usually occurs within the first several weeks or months after the initiation of therapy, when drug dosage is higher. Most reported cases of agranulocytosis have occurred during the first 3 months of therapy. We describe here a rare case that did not experience the side effect for 6 years of antithyroid agent treatment but presented with agranulocytosis in one month after re-exposure. It suggests that the major side effect such as agranulocytosis can occur in patients who had undergone prior uneventful antithyroid drug therapy.

고체발효기를 이용한 농산폐기물의 퇴비화에 따른 물리화학적 및 미생물상 변화

강태수,안문섭,한동준,이해승 도립 강원전문대학 1999 道立 江原專門大學 論文集 Vol.2 No.-

This study was performed to evaluate the composting process of agricultural wastes using the solid state fermentor at the general optimum composting conditions. The changes of physico-chemical and microbiological flora in the reactant during the composting time were investigated. The results were summarized as follows : From the results of proximate composition analysis of fermentation enzyme, the content of moisture, crude ash and total carbohydrate were 2.29, 67.57 and 22.69%, respectively. The number of thermophilic bacteria and actinomycetes in the enzyme were 2.6×10^(4) and 4.1×10^(5) respectively. During the composting time, the content of moisture in all wastes was decreased but acorn waste was not changed. The generation of maximum CO_(2) was in the range of 1,500∼10,000ppm after 12∼36hrs of composting time and then was gradually fallen. The C/N ratios of the Injin murgwort, arrow root and mushroom media waste were increased, but acorn waste was decreased. The contents of inorganic components(P_(2)O_(5), K_(2)O, CaO, and MgO) in the Injin murgwort, arrow root and mushroom media waste were a little decreased, but acorn and hole wastes were increased. The changes of thermophilic bacteria, in the Iniin-murgwort and arrow root waste showed big diversity while acorn and hof waste were slowly decreased. However the population number of thermophilic actinomycetes in the acorn waste was increased until for 24 hrs and then gradually decreased. The population number of thermophilic bacteria and actinomycetes showed not much difference.

전북방언의 특징과 변화의 방향

최전승,김흥수,김창섭,김중진,이태영 全北大學校 語學硏究所 1992 어학 Vol.19 No.-

鬱血性心不全症에 對한 臨床的 觀察

徐明洙,金吉洙,金佑泰,張錫源,金承源,宋昌燮 대한적십자사 1983 적십자병원지 Vol.10 No.2

알코올의 수분함량과 몰비 변화에 따른 실리콘알콕사이드(TEOS·TMOS)의 수율

노재성,조헌영,홍성수,조태웅 忠南大學校 産業技術硏究所 1993 산업기술연구논문집 Vol.8 No.1

Silicon alkoxides(TEOS:tetraethylorthosilicate and TMOS:tetramethylorthosilicate) were synthesized from silicon tetrachloride and ethanol or methanol with the variation of the mole ratio (alcohol/SiCl_4) and the water contents in the alcohol. The optimum mole ratios of alcohol/SiCl_4 were measured to be betweem 4 and 5 and the reactions completed within one hour. The yield of TEOS decreased from 70% to 48% as the water contents increased from 0.1% to 1.0% in ethanol.

이동 애드 혹 네트워크에서의 환경적응형 QoS AODV 라우팅 프로토콜에 관한 연구

裵振勝,宋東勳,吳世德,鄭燦赫,金玄郁,李光培,文泰洙,郭承郁,河載承 明知大學校 産業技術硏究所 2004 産業技術硏究所論文集 Vol.23 No.-

In this paper, we propose a bidirectional mobile Ad Hoc routing protocol based on AODV(ad-hoc on-demand distance vector routing) with QoS(quality of service) support. At presence, wireless mobile communication focuses on how to efficiently support mobility of users more than QoS guarantee. However, in order to satisfy requirement of various applications which have been or will be served, QoS guarantee between end points is a very important issue. The existing AODV routing protocol is implemented to use only BE (Best Effort) service. However, actual wireless mobile environment requires to reduce a waste of communication resources and meet with the real-time change of data paths by setting up routes with QoS support, considering available communication resources at each node in advance. Therefore, in this thesis, we propose an adaptive QoS support method using hello message in order to rapidly meet with the change of available communication resources and to smoothly perform route maintenance. For performance evaluation, we analyzed the average data reception rate. At that time, we used evaluation parameters such as node's mobility-stop time, hello message period, and packet priority, considering the node's mobility and the number of best effort/QoS data flows. As results, we found that with our proposed method the average data reception rate was increased 16.293%, 15.914%, 17.238% for 300 mobility-stop second case and 4.809%, 4.264%, 2.956% for 300 mobility-stop second case.

제조합 대장균에서 과발현된 Citrobacter freundii KCTC2006 유래의 β-Tyrosinase를 이용한 3,4-Dihydroxyphenyl-L-alanine의 생산

이승구,노현수,홍승표,이규종,왕지원,태동년,엄기남,방상구,김영준,성문희 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.1

재조합 대장균에서 대량발현 시킨 Citrobacter freundii KCTC 2006 유래이 효소 β-tyrosinase를 이용하여 pyrocatechol, sodium pyruvate, ammonium acetate로부터 3,4-dihydroxy phenyl-L-alanine을 생산하기 위한 연구를 수행하였다. 이 효소반응에 적합한 온도 및 pH 조건은 각각 18℃와 8.5로 결정되었고, 반응액 중의 ammonium acetate와 sodium pyruvate의 농도는 각각 300 mM, 50 mM 이상으로 조절하는 것이 적합하였다. Pyrocatechol의 경우는 20 mM에서 가장 높은 반응성을 나타냈으나, 기질을 반복적으로 첨가하며 장시간 동안 효소반응을 수행하는 경우에는 pyrocatechol의 고갈을 피하기 위하여, 20 mM에서 50 mM 사이로 조절하였다. 한편, 반응액 중에 ethanol을 10% 첨가한 경우에는 반응속도가약 20% 증가하였다. 이상과 같은 효소반응특성에 기초하여 조제한 기질용액에 β-tyrosinase를 1 unit/㎖ 농도로 가하고, pyrocatechol과 pyruvate가 고갈되지 않도록 간헐적으로 첨가하면서 효소반응을 수행한 결과, 24시간 만에 85.2%의 수율로 31.6g/ℓ의 3,4-dihydroxyphenyl-L-alanine를 생산할 수 있었다. By using the β-tyrosinase of Citrobacter freundii KCTC2006, which was cloned and overexpressed in Escherichia coli, 3,4-dihydroxy phenyl-L-alanine (L-DOPA) was synthesized efficiently from pyrocatechol, sodium pyruvate, and ammonium acetate. Optimal temperature and pH for the reaction were determined to be about 18℃ and 8.5, respectively. The effects of substrate concentrations were also examined at different concentrations of ammonium acetate, sodium pyruvate, and pyrocatechol. Ammonium acetate and sodium pyruvate increased the reaction rate until the concentrations reached to 300 mM and 50 mM, respectively. Although pyrocatechol showed the optimal concentration at 20 mM, it was controlled between 20 mM and 50 mM to avoid the depletion of substrate during the enzymatic synthesis. Based on above results, a reaction medium for the production of L-DOPA was prepared and incubated with 1 unit/㎖ of β-tyrosinase. Pyrocatechol and sodium pyruvate was added to the reaction solution intermittently to avoid the substrate depletion during the enzymatic reaction. After 24 hour of reaction, 31.6 g/ℓ L-DOPA was accumulated in the reaction solution as soluble and precipitated ones and the conversion yield was about 85.2%.

토끼에서 근육주사시 입자 크기에 따른 amoxicillin의 비교 약물동태학

박승춘,윤효인,오태광,장범수,배순이,조준형,정상희,이내경,김민규 충남대학교 수의과대학 동물의과학연구소 1998 動物醫科學硏究誌 Vol.6 No.-

To investigate the pharmacokinetic difference between the two amoxicillin (AMX) particles in rabbits after intramuscular injection (i.m.), both of AMX-S (particle size: 10 ㎍) and AMX-L (particle size: 100 ㎍) were injected into New Zealand White rabbits (1.2±0.3 ㎏) at a dose rate of 10 ㎎/㎏ of body weight. In this study, serum AMX concentrations were detected by microbiological assay with E. coli BE 1186 which shows high antibiotic sensitivity. After i.m. administration, AMX-S and AMX-L were best fitted as 1-compartment model with the absorption and elimination phase. The biological half-life (T_1/2, _k10) of AMX-S is 4.06±1.09 h and that of AMX-L 4.76±0.69 h. The serum maximal concentration time (T_max) of AMX-S and AMX-L were 0.88±0.17 h and 0.77±0.11 h, respectively. Maximal AMX concentration (C_max) (AMX-S: 5.71±0.62 ㎍/㎖, AMX-L: 5.04±0.25 ㎍/㎖) in serum showed a significant difference (p<0.05). In terms of bioequivalance, however, there was no difference between the two AMX's after i.m. injection in the basis of C_max and AUC.

티타늄 레이저 용접부의 기계적 성질 평가

이중재,김길수,안승근,배태성,박찬운 大韓齒科器材學會 2003 대한치과재료학회지 Vol.30 No.2

This study was performed to examine the effects of laser output energy on the mechanical properties of laser-welded titanium joints. Titanium rods of 3 ㎜ in diameter were perpendicularly cut to 30 ㎜ in length for the laser welding. Two rods were fixed to each other with a jig and welded vertically using a Nd:YAG laser at output current of 210-270 A. The penetration depth of the laser beam against the titanium was measured with the changes of output current, pulse duration, and spot diameter. Mechanical tests included tensile testing and Vickers microhardness of the joints. Tensile testing was performed at the crosshead 00speed of 1.0 ㎜/min and a gauge length of 30 ㎜ with a universal testing machine. Vickers microhardness was mesured under 9.8 N load for 15 seconds. The results obtained were summarized as follows; With increasing the output current, the penetration depth of the laser to titanium was increased. Tensile strength values of laser-welded groups were the relatively higher than that of non-welded parent material group. There were significant differences in tensile strength between the specimens of laser-welded at output currents 250 A, 270 A and non-welded parent material group(p<0.05). Microhardness values were increased in the heat-affected zone. Brittle fracture regions were observed in the specimens of laser-welded at output currents 270 A.