도시녹지 유형에 따른 휘발성유기화합물 농도 특성

조예슬(Yeseul Jo),박수진(Sujin Park),노관평(Gwan Pyeong Roh) 한국환경보건학회 2018 한국환경보건학회지 Vol.44 No.4

Objectives: The occurrence characteristics of BTEXS and phytoncides were investigated by type of urban forest. Methods: Four types of urban green space (Hongneung Forest, Mt. Chunjang, residential park, and traffic island) and Gwangneung Forest were selected. Monitoring of phytoncides and BTEXS was conducted considering the activity times of urban residents (five times per day) using a Tenax TA tube and suction pump in June 2017 (one day). Results: Phytoncide concentrations were ranked as Gwangneung Forest>Hongneung Forest>Mt. Cheonjang> traffic island>residential park. Relatively high concentrations of phytoncides were also identified in the urban forest. There was no significant difference between Gwangneung Forest and the urban forest. BTEXS concentrations were ranked as traffic island>residential park>Hongneung Forest>Gwangneung Forest>Mt. Cheonjang. Traffic island and residential park showed high levels of BTEXS depending on the inflow of vehicles. The difference in concentration by time was significant for the traffic island in particular. Pollutant levels in Hongneung Forest were as low as in Gwangneung Forest. Conclusion: The concentrations of phytoncides and BTEXS were different by types of urban green space, and the potential for health and hygiene of urban forests were able to be investigated. This study is expected to provide as basic data for the creation of urban forest spaces in the future.

치면열구전색재의 충전량에 따른 미세누출의 비교연구

박수진,정태성,김신,Park, Soo-Jin,Jung, Tae-Sung,Kim, Shin 대한소아치과학회 2003 大韓小兒齒科學會誌 Vol.30 No.2

본 연구는 치면열구전색재의 충전량이 미세누출에 미치는 영향을 비교분석할 목적으로 실시되었다. 6개의 군으로 나누어 각각 다른 충전량, 치면 전처리, 충전재를 적용하여 미세누출 양상을 비교하였다. 60개의 제 3대구치를 3개의 군으로 나누어 각 군당 20개씩 시편을 구성하였다. 각 치아는 교합면을 두 부분으로 나누어 한 부위는 충전재의 폭이 1mm이하가 되도록 충전하고(1, 3, 5군), 나머지 한 부위는 2mm이상 되도록 충전을 하였다(2, 4, 6군). 1, 2군은 산처리후 Helioseal F로 치면열구전색을 실시하였고, 3, 4군은 산처리후 상아질 접착제로 치면 전처리한 후 Helioseal F로, 5, 6군은 유동성 복합레진인 Tetric Flow로 치면 열구전색을 실시하였다. 500회의 열순환 및 색소침투 후, 미세누출도를 관찰하고 비교분석하여 다음과 같은 결론을 얻었다. 1. 동일한 충전폭을 적용하였을 경우, 미세누출도는 5군<3군<1군과 6군<4군<2군의 순으로 나타났으나 유의한 차이는 아니었다(p>0.05). 2. 동일한 재료와 치면처리를 하되, 충전폭만을 달리한 군들, 즉 1군과 크군, 3군과 4군, 5군과 6군간의 미세누출도에서는 유의한 차이를 보였다(p<0.05). 3. 미세누출은 전색재의 물성, 상아질 접착제 전처리 여부 보다 전색재의 충전량에 더 많은 영향을 받았다. With the purpose of evaluating the effect of ailing amount of pit and assure sealants on the microleakage, 6 groups of specimens with different filling amount, filling materials and surface pretreatment were investigated. Sixty permanent third molars were divided into three groups. The occlusal surface of each tooth was divided into two parts; the filing width of one part was below 1mm (group1, 3, 5), and in the other part more than 2mm (group 2, 4, 6) Group 1 and 2: Helioseal F was applied directly to etched enamel; Group 3 and 4: Helioseal F was applied to etched and scotchbond Multi-purpose plus pre-treated enamel; Group 5 and 6: Tetric Flow was applied. After 500 times thermocycling and dye infiltration, we evaulated the microleakage. The results were as follows; 1. The mean microleakage score at each width were increased in the following order;group 5<3<1, and group 6<4<2. 2. In comparing the groups with same material and surface pretreatment but with different filling width (group 1 versus 2, 3 versus 4, 5 versus 6), the microleakage scores were significantly different. 3 The microleage was affected by filling amount of pit and assure sealants than Oiling materials and dentin bonding agent pretreatment.

산소-불소 처리된 탄소섬유가 에폭시 매트릭스 복합재료의 기계적 계면특성과 크랙저항 특성에 미치는 영향

박수진,오진석,서민강,한미정,김학용,Park Soo-Jin,Oh Jin-Seok,Seo Min-Kang,Han Mijeong,Kim Hak-Yong 한국섬유공학회 2005 한국섬유공학회지 Vol.42 No.3

In this work, the effect of oxy-fluorination on surface characteristics of carbon fibers was investigated in terms of fracture toughness and crack resistance properties of the epoxy matrix composites. The surface properties of the carbon fibers were determined by acid-base values, X-ray photoelectron spectroscopy (XPS), and FT-IR measurements. And their fracture toughness of the composites were evaluated by the interlaminar shear strength (ILSS) and critical stress intensity factor $(K_{lc})$. Crack resistance of the composites was investigated using two types of testing methods, namely critical energy release rate mode I $(G_{lc})$ and mode II $(G_{llc}).\;O_{ls}/C_{ls}\;and\;(O_{ls}+F_{ls})/C_{ls}$ ratio from XPS were increased by oxy-fluorination, due to the oxygen containing functional groups and the formation of $C-F_{x}$ bonds on the carbon fiber surface. It was found that the fracture toughness and crack resistance of the composites had been improved by the oxy-fluorination, which could probably be attributed to the increase in the degree of adhesion at interfaces between the carbon fibers and epoxy resin matrix in the present composite system.

생화학무기 대응할 방독면 · 보호의

박수진,Park, Su-Jin 한국과학기술단체총연합회 2003 과학과 기술 Vol.36 No.5

수술실 간호사의 혈행성 감염 예방에 대한 지식, 인식 및 수행

박수진,김금순,Park, Soo-Jin,Kim, Keum-Soon 한국중환자간호학회 2009 중환자간호학회지 Vol.2 No.2

Purpose: The purpose of this study was to identify the knowledge, perception and compliance to prevent from blood borne infection for the nurses working at operating room. Methods: The data was collected from the questionnaire surveying 330 operating room nurses from 7 different hospitals located in Seoul and Gyeonggi-do from February 11 to March 7 2008. The instrument for perception and compliance to prevent from blood borne infection was 24-item questionnaire, which had been developed by Choi(2005). In addition, to find out the knowledge level of hepatitis B, hepatitis C, AIDS and handling of syringes, 19-item questionnaire was used, which was developed by researcher based on Kim(2003) and Choi(2005). Results: The average score of the knowledge was 14.42. The average perception was 4.51 out of 5.00. The average compliance was 3.91 out of 5.00. The correlation among the knowledge, perception and compliance to prevent from blood borne infection showed that there was positive correlation between the knowledge and perception(r= .234, p= .000) and also it was positive between perception and compliance(r= .415, p= .000). Conclusion: To improve compliance to prevent from blood borne infection for operating room nurses, it should be studied to enhance the perception to prevent from blood borne infection. Moreover, the operating room should be equipped with protective devices and written safety guidelines.

가방 휴대 방법이 보행 시 발바닥 접촉 양상에 미치는 영향

박수진,권유정,김민희,김진상,Park, Soo-Jin,Kwon, Yoo-Jung,Kim, Min-Hee,Kim, Jin-Sang 대한물리치료과학회 2011 대한물리치료과학회지 Vol.18 No.2

Purpose: The purpose of this study was to analyze the changes of parameters of foot contact by various carrying a pack methods during walking. Method: The subjects were consisted of normal forty four persons (males 30, females 14, mean age 23). The carrying a pack methods were classified into five conditions: carrying no bag(Con 1), carrying a backpack(Con 2), carrying a shoulder bag(Con 3), carrying a cross bag(Con 4), carrying a one-hand bag(Con 5). All subjects were participated in these five condition and measured foot pressure by F-scan system during walking. Then foot contact time, foot contact area, foot contact length and width were measured and analyzed. The repeated one-way analysis of variance (ANOVA) was used to get difference between conditions and independent t-test was used to get difference between left and right foot within condition. Result: In the comparison of parameters of foot, contact time, contact area and mid foot width were significantly different between conditions(p<.05), and in both foot contact time at condition 5 showed the most significant reduction(p<.05). In the comparison of parameters of foot between left and right foot within condition, every conditions were not significantly different(p>.05). Conclusion: In this study various carrying methods changed the parameters of foot contact and showed significant difference in some articles between carrying methods. However, asymmetric load of pack by carrying methods didn't affected symmetry of parameters of foot contact between left and right foot.

양이온 개시제 함량이 2관능성 에폭시 수지의 Electron-beam 경화에 미치는 효과

박수진,허건영,이재락,서동학,Soo-Jin Park,Gun-Young Heo,Jae-Rock Lee,Dong Hack Suh 대한화학회 2003 대한화학회지 Vol.47 No.3

본 연구에서는 이관능성 에폭시 수지의 전자선 (EB) 경화에 양이온 개시제 함량이 미치는 영향을 근적외선 분광기 (NIRS), 열중량 분석기 (TGA), 그리고 임계응력 인자 (KIC)를 사용하여 고찰하였다. 개시제로서 benzyl- quinoxalinium hexafluoroantimonate (BQH)을 사용하였으며, 함량은 0.5, 1, 2, 그리고 3 phr로 변화시켰다. NIRS 측정에 의해 BQH의 함량이 증가할수록 EB 경화된 에폭시 수지의 수산화기가 증가하는 것을 알 수 있었으며, 열안정성과 $K_{IC}$는 BQH 함량이 증가할수록 증가하다가 함량이 2 phr을 넘으면 감소함을 확인하였다. 이러한 결과들은 에폭시 수지의 경화반응 전환율과 경화도의 감소로 설명될 수 있었다. 다시 말하면, BQH의 함량이 2 phr 이상이 되면 에폭시 수지의 경화반응 전환율과 경화도가 높은 반응성에 기인한 불완전한 네트워크 구조로 인해서 제한되기 때문에 열안정성과 $K_{IC}$가 낮아진다고 생각된다. In this work, the effect of cationic initiator content on the electron-beam (EB) curing process of diglycidylether of bisphenol-A (DGEBA) resin was studied using near-infrared spectroscopy (NIRS), thermogravimetric analysis (TGA), and critical stress intensity factor $(K_{IC})$. Benzylquinoxalinium hexafluoroantimonate (BQH) were used as an initiator and its content was varied from 0.5 to 3 phr. NIRS measurements showed that the hydroxyl group of EB-cured epoxy resin was increased with increasing the BQH content. Thermal stability and $K_{IC}$ value of EB-cured epoxy resin were increased with increasing the BQH content but were decreased above 2 phr content. These results could be attributed to the decrease of the conversion and degree of crosslinking. In another word, the conversion and degree of crosslinking were restricted by the incomplete network structure from high reactivity at the BQH content above 2 phr, resulting in decreasings of thermal stability and $K_{IC}$.

불소처리된 카본블랙을 충전한 HDPE 기지 컴파운드의 PTC/NTC 특성에 관한 연구

박수진,송수완,서민강,신재섭,김규철,Soo-Jin Park,Su-Wan Song,Min-Kang Seo,Jae-Sup Shin,Kyuchul Kim 대한화학회 2003 대한화학회지 Vol.47 No.2

In this study, the fluorinated carbon blacks(CB) were used to reduce the negative temperature coefficient (NTC) phenomenon of the CB-filled high density polyethylene(HDPE) compounds in the fluorination pressure of 0.1-0.4 MPa. The changes in surface properties of the CB were investigated by using FT-IR, XPS and contact angle measurements. From the FT-IR results, the fluorinated CB showed the C-F absorption peak at 1400-1000 cm$^{-1}$ and the peak intensity was increased with increasing the fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content was increased with increasing the fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB was decreased with increasing the fluorination pressure. Consequently, the increase of fluorine contents on CB made a disappearance of NTC behaviors of CB/HDPE compounds, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulting from decreasing the surface free energy of CB particles. 본 연구에서는 PTC 소자의 NTC 현상을 제거하기 위하여 카본블랙을 0.1-0.4 MPa의 압력으로 불소처리 한 후 이를 이용하여 카본블랙/HDPE 전도성 컴파운드를 제조하였다. 불소처리한 카본블랙의 표면특성 변화는 FT-IR, XPS 그리고 접촉각 측정을 통하여 확인하였다. FT-IR실험 결과, 불소처리된 카본블랙은 1400-1000 cm$^{-1}$ 영역에서 C-F 피크를 나타내며 처리압력이 증가할수록 C-F 피크의 세기가 증가함을 확인할 수 있었다. 또한, XPS 분석을 통해 불소처리 압력이 증가할수록 카본블랙 내의 불소의 함량이 증가함을 확인하였다. 그러나, 불소처리된 카본블랙의 표면자유에너지는 처리압력이 증가할수록 감소하였다. 결과로서, 카본블랙의 불소 처리를 통해 카본블랙/HDPE 컴파운드의 NTC 현상이 사라졌는데, 이는 카본블랙의 표면자유에너지 감소가 수지의 융점 이후 일어나는 카본블랙 입자간의 재결합을 방해하기 때문이라 사료된다.

세션 패턴을 이용한 네트워크기반의 비정상 탐지 모델

박수진,최용락,Park Soo-Jin,Choi Yong-Rak 한국정보처리학회 2004 정보처리학회논문지 C : 정보통신,정보보안 Vol.11 No.6

Recently, since the number of internet users is increasing rapidly and, by using the public hacking tools, general network users can intrude computer systems easily, the hacking problem is getting more serious. In order to prevent the intrusion, it is needed to detect the sign in advance of intrusion in a positive prevention by detecting the various foms of hackers' intrusion trials to know the vulnerability of systems. The existing network-based anomaly detection algorithms that cope with port- scanning and the network vulnerability scans have some weakness in intrusion detection. they can not detect slow scans and coordinated scans. therefore, the new concept of algorithm is needed to detect effectively the various forms of abnormal accesses for intrusion regardless of the intrusion methods. In this paper, SPAD(Session Pattern Anomaly Detector) is presented, which detects the abnormal service patterns by comparing them with the ordinary normal service patterns. 현재는 인터넷 이용자들이 급격하게 증가하고 있으며, 초보수준의 일반 네트워크 사용자들도 인터넷상의 공개된 해킹 도구들을 사용하여 고도의 기술을 요하는 침임이 가능해졌기 때문에 해킹 문제가 더욱 심각해지고 있다. 해커들이 침입하기 위하여 취약점을 알아내려고 의도하는 다양한 형태의 침입시도들을 탐지하여 침입이 일어나는 것을 사전에 방어할 수 있는 침입시도탐지가 적극적인 예방 차원에서 더욱 필요하다. 기존의 포트 스캔이나 네트워크 취약점 검색 공격에 대응하기 위한 네트워크 기반의 비정상 침입시도 탐지 알고리즘들은 침입시도탐지에 있어 몇 가지 한계점을 갖고 있다. 기존 알고리즘들의 취약성은 Slow Scan과 Coordinated Scan을 한 경우 탐지한 수 없다. 따라서, 침입시도 유형에 제한을 받지 않고 침입시도에 관한 다양한 형태의 비정상 접속을 효과적으로 탐지할 수 있는 새로운 개념의 알고리즘이 요구된다. 본 논문에서는 평상시 정상적인 서비스 패턴을 가지고 그 패턴과 다른 비정상 서비스 패턴이 보이면 이를 침입시도로 탐지하는 개념의 SPAD(Session Pattern Anomaly Detector) 기법을 제안한다.

제올라이트/DGEBA 복합재료의 경화 동력학과 기계적 계면특성

박수진,김영미,신재섭,Soo-Jin Park,Young-Mi Kim,Jae-Sup Shin 대한화학회 2003 대한화학회지 Vol.47 No.5

In this work, the zeolite/diglycidylether of bisphenol A(DGEBA) systems were investigated in terms of the cure kinetics and mechanical interfacial properties of the composites. The 4, 4-diamino diphenyl methane(DDM) was used as a curing agent for epoxy. Two types of zeolite(PZ) were prepared with 15 and 35 wt% KOH treatments(15-BZ and 35-BZ, respectively) for 24 h, and their surface characteristics were studied by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction(XRD). Cure kinetics of the composites were examined in the context of differential scanning calorimetry(DSC), and mechanical interfacial properties were investigated in critical stress intensity factor($K_{IC}$) and critical strain energy release rate($G_{IC}$). In the results of XPS and XRD, sodium ion(Na) of zeolite was exchanged for potassium ion(K), resulting from the treatment of KOH. Also, $Si_{2p}/Al{2p}$ composition ratios of the treated zeolite were increased, which could be attributed to the weakening of Al-O bond in framework. Cure activation energy($E_a$) of 15-BZ composites was decreased, whereas KIC and $G_{IC}$ were increased, compared with those of the pure zeolite/DGEBA composites. It was probably accounted that the acidity of zeolite was increased by surface treatments and the cure reaction between zeolite and epoxy was influenced on the increased acidity of zeolite. 본 연구에서는 표면처리된 제올라이트에 따른 제올라이트/DGEBA의 경화 동력학과 기계적 계면특성을 고찰하였다. 경화제는 4, 4''-diamino diphenyl methane(DDM)을 사용하였으며, 제올라이트는(PZ) 15와 35 wt% KOH (15-BZ 그리고 35-BZ)로 표면처리하여 XPS와 XRD로 분석하였다. 경화 동력학은 DSC로 분석하였으며, 시편의 기계적 계면특성은 임계응력 세기인자(critical stress intensity factor, $K_{IC}$)와 임계변형에너지 방출속도(critical strain energy release rate, GIC)를 통하여 알아보았다. XPS와 XRD의 결과로부터, KOH로 표면처리된 제올라이트는 나트륨 (Na)이 칼륨(K)으로 이온교환되었으며, 표면처리로 인한 Al-O의 결합세기의 약화로 $Si_{2p}/Al{2p}$의 값이 증가하였다. 동적 DSC와 기계적 계면특성 결과로부터, 제올라이트/DGEBA 중에서 15-BZ의 경화 활성화에너지($E_a$)는 감소하였으며, $K_{IC}$와 $G_{IC}$는 증가하였다. 이러한 결과들은 제올라이트의 표면처리에 의해 산성도가 증가하였으며, 이렇게 증가된 산성도가 제올라이트와 에폭시 사이의 경화반응에 영향을 준 것으로 관찰된다.