Na₂S 하부층을 이용한 Cu(In,Ga)Se₂ 광흡수층의 저온증착 및 Cu(In,Ga)Se₂ 박막태양전지에의 응용

신해나라(Hae Na Ra Shin),신영민(Young Min Shin),김지혜(Ji Hye Kim),윤재호(Jae Ho Yun),박병국(Byung Kook Park),안병태(Byung Tae Ahn) 한국태양광발전학회 2014 Current Photovoltaic Research Vol.2 No.1

High-efficiency in Cu(In,Ga)Se₂ (CIGS) solar cells were usually achieved on soda-lime glass substrates due to Na incorporation that reduces deep-level defects. However, this supply of sodium from sodalime glass to CIGS through Mo back electrode could be limited at low deposition temperature. Na content could be more precisely controlled by supplying Na from known amount of an outside source. For the purpose, an Na₂S layer was deposited on Mo electrode prior to CIGS film deposition and supplied to CIGS during CIGS film. With the Na₂S underlayer a more uniform component distribution was possible at 350°C and efficiency was improved compared to the cell without Na₂S layer. With more precise control of bulk and surface component profile, CIGS film can be deposited at low temperature and could be useful for flexible CIGS solar cells.

Na₂S 하부층을 이용한 Cu(In,Ga)Se₂ 광흡수층의 저온증착 및 Cu(In,Ga)Se₂ 박막태양전지에의 응용

신해나라,신영민,김지혜,윤재호,박병국,안병태,Shin, Hae Na Ra,Shin, Young Min,Kim, Ji Hye,Yun, Jae Ho,Park, Byung Kook,Ahn, Byung Tae 한국태양광발전학회 2014 Current Photovoltaic Research Vol.2 No.1

High-efficiency in $Cu(In,Ga)Se_2$ (CIGS) solar cells were usually achieved on soda-lime glass substrates due to Na incorporation that reduces deep-level defects. However, this supply of sodium from sodalime glass to CIGS through Mo back electrode could be limited at low deposition temperature. Na content could be more precisely controlled by supplying Na from known amount of an outside source. For the purpose, an $Na_2S$ layer was deposited on Mo electrode prior to CIGS film deposition and supplied to CIGS during CIGS film. With the $Na_2S$ underlayer a more uniform component distribution was possible at $350^{\circ}C$ and efficiency was improved compared to the cell without $Na_2S$ layer. With more precise control of bulk and surface component profile, CIGS film can be deposited at low temperature and could be useful for flexible CIGS solar cells.

Energy storage capabilities of nitrogen-enriched pyropolymer nanoparticles fabricated through rapid pyrolysis

Yun, Young Soo,Kim, Yu Hyun,Song, Min Yeong,Kim, Na Rae,Ku, Kyojin,An, Ji Su,Kang, Kisuk,Choi, Hyoung Jin,Jin, Hyoung-Joon Elsevier 2016 Journal of Power Sources Vol.331 No.-

<P><B>Abstract</B></P> <P>Nanostructured pyropolymers contain significant amounts of redox-active heteroatoms, have high specific surface areas, and a defective carbon microstructure, indicating good potential for pseudocapacitive charge storage. In this study, nitrogen-enriched pyropolymer nanoparticles (N-PNs-50) are fabricated from polyaniline nanotubes through rapid pyrolysis at 50 °C min<SUP>−1</SUP>. N-PNs-50 exhibit a nitrogen content of 9.8 wt%, a high specific surface area of 875.8 m<SUP>2</SUP> g<SUP>−1</SUP>, and an amorphous carbon structure with an I<SUB> <I>D</I> </SUB>/I<SUB> <I>G</I> </SUB> intensity ratio of 0.95. These unique characteristics lead to good electrochemical performances, in which reversible capacities of 660 and 255 mAh g<SUP>−1</SUP> are achieved for Li-ion and Na-ion storage, respectively, with favorable voltage characteristics (<1.5 V for Li-ions and <1.2 V for Na-ions). This study provides a more feasible production method for nitrogen-doped pyropolymers and their practicable electrochemical performances for use as an anode in energy storage devices.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Nanostructured pyropolymers (N-PNs-50) were fabricated by rapid pyrolysis. </LI> <LI> N-PNs-50 exhibited a nitrogen content of 9.8 wt% and amorphous carbon structure. </LI> <LI> N-PNs-50 exhibited a high specific surface area of 875.8 m<SUP>2</SUP> g<SUP>−1</SUP>. </LI> <LI> 660 and 255 mAh g<SUP>−1</SUP> were achieved for Li-ion and Na-ion storage, respectively. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>Nitrogen-enriched pyropolymer nanoparticles (N-PNs-50) were fabricated from polyaniline nanotubes through rapid pyrolysis at 50 °C min<SUP>−1</SUP>, showing superior electrochemical performances.</P> <P>[DISPLAY OMISSION]</P>

Hierarchically nanoporous pyropolymer nanofibers for surface-induced sodium-ion storage

Yoon, Hyeon Ji,Lee, Min Eui,Kim, Na Rae,Yang, Seung Jae,Jin, Hyoung-Joon,Yun, Young Soo Pergamon Press 2017 Electrochimica Acta Vol. No.

<P><B>Abstract</B></P> <P>Surface-driven charge storage materials based on both electrochemical double layer (EDL) formation and pseudocapacitive behavior can deliver high energy and power capabilities with long-lasting cycling performance. On the other hand, the electrochemical performance is strongly dependent on the material properties, requiring sophisticated electrode design with a high active surface area and a large number of redox-active sites. In this study, hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) were fabricated from electrospun polyacrylonitrile nanofibers by simple heating with KOH. The HN-PNFs have a hierarchically nanoporous structure and an exceptionally high specific surface area of 3,950.7m<SUP>2</SUP> g<SUP>−1</SUP> as well as numerous redox-active heteroatoms (C/O and C/N ratio of 10.6 and 16.8, respectively). These unique material properties of HN-PNFs resulted in high reversible Na-ion capacity of ∼292mAhg<SUP>−1</SUP> as well as rapid kinetics and stable cycling performance in the cathodic potential range (1-4.5V vs. Na<SUP>+</SUP>/Na). Furthermore, energy storage devices based on HN-PNFs showed a remarkably high specific energy of ∼258 Wh kg<SUP>−1</SUP> at ∼245Wkg<SUP>−1</SUP> as well as a high specific power of ∼21,500Wkg<SUP>−1</SUP> at ∼78 Wh kg<SUP>−1</SUP>, with long and stable cycling behaviors over 2,000 cycles.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) were fabricated. </LI> <LI> HN-PNFs have a high specific surface area of ∼3,950m<SUP>2</SUP> g<SUP>−1</SUP> and numerous heteroatoms. </LI> <LI> HN-PNFs exhibit high capacities of ∼292mAhg<SUP>−1</SUP> and great rate/cycling performances. </LI> <LI> High energy (258Whkg<SUP>−1</SUP>) and high power (21,500Wkg<SUP>−1</SUP>) are achieved. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>Hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) fabricated from electrospun polyacrylonitrile nanofibers by simple heating with KOH exhibited high electrochemical performance for Na-ion storage.</P> <P>[DISPLAY OMISSION]</P>

색상 측정 기기를 이용한 복합레진 적층 수복과 단일 수복의 색상 비교 분석

송영상,김자현,이빈나,장지현,장훈상,황윤찬,오원만,황인남 大韓齒科保存學會 2012 Restorative Dentistry & Endodontics Vol.37 No.2

Objectives: This study analyzed the difference in color caused by different thickness in enamel layer of composite resins when applied with single and layering placement technique, and evaluated if the results agreed with the shade guide from the manufacturers to verify reliability of the color matching process of the manufacturers. Materials and Methods: For single composite resin samples, 6 mm diameter and 4 mm thickness cylindrical samples were fabricated using Ceram-X mono (DENTSPLY DeTrey) and CIE L*a*b* values were measured with spectrophotometer. Same process was done for layering compositie resin samples, making 3 dentinal shade samples, 4 mm thickness, for each shade using Ceram-X duo (DENTSPLY DeTrey) and enamel shade resins were layered in 2 mm thickness and CIE L*a*b* values were measured. These samples were ground to 0.2 mm thickness each time, and CIE L*a*b* values were measured to 1 mm thickness of enamel shade resin. Results: Color difference (△E*) between single and layering composite resin was 1.37 minimum and 10.53 maximum when layering thicknesses were between 1 mm and 2 mm and 6 out of 10 same shade groups suggested by manufacturer showed remarkable color difference at anythickness (△E* > 3.3). Conclusion: When using Ceram-X mono and duo for composite resin restoration, following the manufacturer's instructions for chossing the shade is not appropriate, and more accurate information for Ceram-X duo is needed on the variation and expression of the shades depending on the thickness of the enamel. (Restor Dent Endod 2012;37(2):84-89)

지식 언톨러지 개념을 이용한 전문 문서의 지식미디어 시스템에 관한 연구

오창윤,조정래,나영남,배상현 조선대학교 통계연구소 2000 統計硏究所論文誌 Vol.2 No.1

The knowledge of the specialized fields has been changed rapidly in the both side of quantity and quality. A hyper media as a knowledge based system is so fixed in the linked media in mutual that we could not tell it information provision with the view of user. In this paper, we propose the way of offering intellectual and flexible information which is same with demand in the side of user, selecting, searching and composing the HyperText at the point of user's view through the design of knowledge media system, three concepts is used in order to challenge the knowledge media system : special document, agent system and ontology. The special document is a knowledge using special fields. The agent system is a homogeneous controller that operates on an application to ensure that its activities are coordinated with those of the others within the community, providing a uniform control mechanism. The last 3th concept, ontology is a language for exchanging knowledge, which is a message exchanged among agents to ensure the proper interaction among them. The combination of these three concepts is used designed the prototype of knowledge media system.

복막투석복막염 환자에서 발생한 창자벽공기증 1예

정선영,나지훈,최윤정,고성애,조규향,박종원,도준영,윤경우 영남대학교 의과대학 2009 Yeungnam University Journal of Medicine Vol.26 No.1

Peritonitis is a serious problem in patients undergoing peritoneal dialysis. Rarely pneumatosis intestinalis can occur as a complication of this infectious process. Pneumatosis intestinalis is a potential life threatening condition with a challenging management. The mortality of peritoneal dialysis patients with pneumatosis intestinalis secondary to mesenteric ischemia is almost 100%. We describe a rare case of pneumatosis intestinalis in a peritoneal dialysis patient who developed Staphylococcus aureus peritonitis which was initially treated with appropriate antibiotics. Since initial response to therapy was not achieved, an abdominal computerized tomography was done which revealed a pneumatosis intestinalis. A laparotomy was performed and small bowel necrosis was seen. A segmented resection with ileostomy, jejunostomy was done. Though surgical treatment was performed, the patient died in 2 weeks after admission. Pneumocystitis intestinalis in peritoneal dialysis peritonitis is a uncommon complication which requires prompt evaluation to rule out mesenteric ischemia as it carries a high mortality and its management will be surgical.

만성 견비통에 대한 동씨침 치료의 무작위 대조군의 임상 연구

김찬영,권나현,신예지,남동우,김건형,김종인,최도영,이윤호,이재동 WHO COLLABORATING CENTRE FOR TRADITIONAL MEDICINE 2007 東西醫學硏究所 論文集 Vol.2007 No.-

Objectives : To observe the effect of acupuncture treatment in chronic shoulder pain patients. Methods : 36 voluntary patients were randomly assigned to an acupuncture treatment group(E GrouP, n=18) and a control group(C GrouP, n=18). The E Group patients received acupuncture treatment on LI_(15), TE_(14), GB_(21) and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for four weeks. The C Group patients received no treatment. All patients in both groups were instructed to practise self exercise in their daily lives. Evaluations were made at baseline and after four weeks of study. The Constant Shoulder Assessment(CSA), Shoulder Pain and Disability Index(SPADI) and the patient's subjective pain was measured by Visual Analogue Scale(VAS). The obtained data was analyzed. Results '. The E Group showed significant(p<0.05) improvement in CSA, SPADI and VAS after four weeks of treatment. The C Group showed significant(p<0.05) improvement in CSA, but the change of SPADI and VAS was insignificant(P>0.05). CSA and SPADI of E Group significantly(p<0.05) improved compared to the C GrouP, but the difference of VAS change in the two groups was insignificant(p>0.05). Conclusions : Four weeks of acupuncture treatment significantly improved CSA, SPADI and VAS. The improvement of CSA and SPADI was significant(p<0.05) compared to untreated patients.

냉수 가글링과 젖은 거즈를 이용한 구강간호가 비강수술 환자의 갈증 및 구강상태에 미치는 효과 비교

이인선,심명숙,나은희,강재연,김지혜,황민영,윤계숙,성영희 병원간호사회 2006 임상간호연구 Vol.11 No.2

Purpose: This study researched the comparison of oral care methods between the wet gauze and the water gargling for nasal surgery patients. It executed to find out more effective method to relieve thirst. Method: We divided two groups; the wet gauze and the cold water garaling. We assessed patient's oral cavity state and sebjective oral dryness for three times; firstly before the intervention, secondly 15 minutes after 1st intervention and thirdly 15 minutes afrer 2nd intervention. Result: As the intervention, there was no difference on oral condition subhectvely, but there was a difference on thirsty reduction objectively. As the aral dryness has relieved through both methods. It showed the repeated gargling helps more to relieve oral dryness effectively than the wet gauge. At PACU, post nasal surgery patient's oral dryness was decreased with gauze more than two times, patient's oral dryness was relieved. Whereas the dryness was relieved after applying the cold water gargling for just one time. Conclusion: The water gargling is more effective intervention than the wet gauze. Especially, oral dryness was improved in the section of objetive oral assessment index.

Piezoelectric Properties of Lead-Free Na_0.5K_0.5NbO₃ Ceramics Co-Doped with NiO and CuO

Tai, Weon-Pil,Kim, Young-Hyeok,Ok, Yun-Po,Ji, Han-Na,Kang, Sang-Kyu,Lee, Jae-Shin Informa UK (Taylor Francis) 2010 Integrated ferroelectrics Vol.114 No.1