김소월 「시혼」의 이기론적(理氣論的)고찰

김지혜 ( Ji Hye Kim ),권유성 ( Yu Seung Kwon ) 한국문학언어학회( 구- 경북어문학회) 2010 어문론총 Vol.52 No.-

This study aims at clarifying that Kim, So-Wol`s poetics is based on LiKi(理氣)philosophy. And this is to show the distinction between Western ideas like Romanticism which is accepted by Kim-uk and So-Wol`s traditional poetics. The results are as follows. First, So-Wol is realized paradoxical sense which can find out positive meaning from negative thing and overcome Western dichotomy by LiKijimyo(理氣之妙) principal means that Li(理) as Hyungisanja(形而上者: metaphysical thing) and Ki(氣) as Hyungihaja (形而下者: physical thing)are neither divided nor united. Second, So-Wol emphasizes that immutable character of Sihon(詩 魂) on his poetics because he wants to show Li`s character as inevitable cause and right. As he authorizes Sihon(詩魂) ontological and axiological character of Li, Sihon(詩魂) has Good truth and thereby has good effect for society. Unlike Kim-uk`s romanticism, to display subjectivity on So-Wol`s poetics is based on LiKi philosophy has a effect for society, because the subjectivity has a moral sensibility. Last, like Li and Ki, Sihon(詩魂) is manifested on poetry by Umyoung(陰影), so poetry is valuated by not Sihon but Umyoung. But So-Wol contradicted himself by asserting that Umyoung(陰影) isn`t discussed merits and demerits. This is explained by considering LiKijimyo(理氣之妙). Ki is a manifestation of Li, therefore when we see poetry as Ki with view is based on authenticity, Ki is not a thing of judgement. But when we poetry with view is based on substantiality, Ki is a thing of judgement. In conclusion, So-Wol intended to include not only eternal nature but also substantiality on modern poetry with LiKi(理氣) philosophy.

인터뷰 - 김지혜 롯데칠성음료(주) 디자인팀 디자이너

김지혜,Kim, Ji-Hye (사)한국포장협회 2010 包裝界 Vol.210 No.-

지식경제부와 한국디자인진흥원은 대한민국 디자인 산업을 이끌어갈 우수한 신예 디자이너 발굴의 장이자, 국내 산업 디자인의 미래를 조망하는 "대한민국디자인전람회" 수상작을 발표했다. 대한민국 디자인계를 이끄는 학계 산업계의 초대 추천 디자이너 542명을 배출한 이 전람회는 1995년부터 집계된 출품 수만 2만5천여 점에 달하는 국내 최대 최고 규모의 공모전이다. 이번 전람회에서는 롯데칠성 디자인팀의 김지혜 씨가 바쁜 현대인들에게 안전하고 건강한 생활 식습관을 제안한 "요리하는 즐거움, 건강한 라이프스타일을 위한 패키지디자인연구"로 국무총리상을 수상하게 됐다. 김지혜 디자이너에게 작품 소개 및 패키지디자인에 대한 견해를 들어보았다.

1960년대 손창섭의 신문연재소설에 나타난 청년 표상 연구

김지혜(Kim, Ji-Hye) 한국어문학회 2016 語文學 Vol.0 No.131

This study is to analyze representation of the youth shown in Son, Chang-seob’s serial novels in newspapers. His serial novels in newspapers are closely connected to the situation of politics and society of 1960s and it reflects identity of a social class as well as awareness of society issues among the public. Also, it shows rapidly changing generation of Korean society and moral regulations through love affairs happening between male and female characters who just had become old generation. Those characters who are playing unique roles in his novel are in their 20s either university students or people who are starting out a career. They confront with old generation due to difference in moral regulation or they reveal irrationality by showing resistance against society. This study particularly analyzed representation of the youth shown in his novels titled 『husband and wife』, 『A classroom of human beings』, 『Father and Two Daughters』 and 『Sons』 that show confrontation between old generation and young generation. Son, Chang-seob criticizes hypocrisy and corruption among materialized old generation through young characters. First type of young people is stuck in the self-contradiction or copies old generation during the process of fighting against old generation. Second type of young people reflects on corruption of Korean society and dreams of becoming a new father. Son, Chang-seob diagnoses corruption of Korean society while showing hopes for future through representation of the youth. Representation of the youth is meaningful as it criticizes corruption of Korean society but it also has limitations since it accepts the national ideology of the time.

WC-Co 초경합금(超硬合金) 슬러지로부터 왕수처리(王水處理)를 이용한 텅스텐의 회수(回收)

김지혜,김은영,김원백,김병수,이재천,신재수,Kim, Ji-Hye,Kim, Eun-Young,Kim, Won-Back,Kim, Byung-Su,Lee, Jae-Chun,Shin, Jae-Soo 한국자원리싸이클링학회 2010 資源 리싸이클링 Vol.19 No.4

A fundamental study was carried out to develop a process for recycling tungsten and cobalt from WC-Co hardmetal sludge generated in the manufacturing process of hardmetal tools. The complete extraction of cobalt and simultaneous formation of tungstic was achieved by treating the sludge using aqua regia. The effect of aqua regia concentration, reaction temperature and time, pulp density on cobalt leaching and tungstic acid formation was investigated. The complete leaching of cobalt was attained at the optimum conditions: 100 vol.% aqua regia concentration, $100^{\circ}C$ temperature, 60 min. reaction time and 400 g/L pulp density. A complete conversion of tungsten carbide of the sludge to tungstic acid was however, obtained at the pulp densities lower than 150 g/L under the above condition. The progress of reaction during the aqua regia treatment of the sludge was monitored through the XRD phase identification of the residue. The metallic impurities in the tungstic acid so produced could be further removed as insoluble residues by dissolving the tungsten values in ammonia solution. The ammonium paratungstate($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$) of 99.85% purity was prepared from the ammonium polytungstate solution by the evaporation crystallization method. 초경공구의 제조공정에서 발생하는 WC-Co 초경합금 슬러지로부터 텅스텐의 순환활용을 위한 기초연구가 수행되었다. 왕수를 사용하여 슬러지로부터 코발트를 침출함과 동시에 탄화텅스텐을 텅스텐산으로 변환시켜 회수하였다. 왕수농도, 반응온도와 시간, 광액농도 등이 코발트의 침출과 텅스텐산의 생성에 미치는 영향을 조사하였으며 최적조건을 도출하였다. 왕수농도 100 vol.%, 반응온도 $100^{\circ}C$, 반응시간 60분에서슬러지의 광액농도가 400 g/L에 도달할 때 까지 슬러지로부터 코발트의 완전한 추출이 이루어졌으나, 슬러지에 존재하는 모든 탄화텅스텐이 텅스텐산으로 완전히 전환되는 것은 광액농도가 150 g/L 이하일 때 이었다. 생성된 텅스텐산을 암모니아 용액에 용해함으로서 금속 불순물들을 불용성 잔사로 제거하는 것이 가능하였다. 증발결정 공정을 통하여 정제된 암모늄 텅스테이트 용액으로부터 99.85%의 순도를 가지는 암모늄 파라텅스테이트($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$)를 얻을 수 있었다.

5 Nm³ /hr급 알카라인 수전해 시스템 안전기준 분석 및 안전성능 평가에 관한 연구

김지혜,이은경,김민우,오건우,이정운,김우섭,Kim, Ji-Hye,Lee, Eun-Kyung,Kim, Min-Woo,Oh, Gun-Woo,Lee, Jung-Woon,Kim, Woo-Seop 한국가스학회 2018 한국가스학회지 Vol.22 No.6

풍력에너지는 낮에 비해 야간에 많은 잉여전력을 발생시키기 때문에 야간에 생산되는 전력은 버려지고 있는데, 이 문제를 해결하기 위해 풍력 등 재생에너지를 연계한 수전해 하이브리드 시스템 개발이 활발히 이루어지고 있다. 본 연구에서는 하이브리드 시스템 안전성 향상을 위해 국내 외 수전해 시스템 기준의 평가항목을 분석하였고, 평가 항목을 토대로 수전해 시스템의 안전성능 시험항목을 도출하였다. $5Nm^3/hr$급 수전해 시스템의 안전성능 평가를 위하여 시험항목 중 효율측정시험, 수소발생압력시험, 수소 순도시험을 평가하였다. 그 결과 수소발생량은 $5.10Nm^3/hr$, 스택효율은 $4.97kWh/Nm^3$로 산출되었고, 이때 발생한 수소의 순도는 99.993%로 국제기준 ISO 14687, SAE J2719에 명시된 순도보다 높은 순도의 수소를 생산하였음을 확인할 수 있었다. 본 연구 결과는 향후 수전해 시스템의 구축과 안전성능을 평가에 도움이 될 것이라고 기대한다. The wind energy produced at night is being discarded because of the excess power generated at night compared to daytime. To solve this problem, In this study, we analyzed the evaluation contents for evaluation of domestic and overseas water electrolysis systems and drew contents for safety performance contents test of the water electrolysis system based on the evaluation contents. The test contents produced the efficiency measurement test, the hydrogen generated pressure test, and the hydrogen purity test. And the safety performance evaluation of the alkaline water electrolysis system of $5Nm^3/hr$ was performed based on the results. As a result, the hydrogen generation was calculated as $5.10Nm^3/hr$ and the stack efficiency was $4.97kWh/Nm^3$. The purity of the hydrogen generated was 99.993% and it was confirmed that it produced high purity hydrogen. I think will help us assess and build safety performance of water electrolysis systems in the future.

중력 효과를 받는 인공 초공동에 대한 수치해석

김지혜,정소원,안병권,Kim, Ji-Hye,Jeong, So-Won,Ahn, Byoung-Kwon 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.5

Supercavitation can be generated at relatively lower speeds by injecting compressed air behind the cavitator. As a result, an artificially created supercavity is deformed and its tail tends to rise due to gravitational effects. However, practical prediction of the artificial supercavity currently depends on empirical results. In this study, a mathematical model for the artificial supercavity under the gravity effect is proposed. Based on a boundary element method, geometric characteristics of the supercavity at different flow conditions are examined. The results were compared with an existing empirical formula and also experimental observations carried out at a cavitation tunnel of the Chungnam National University.

임플란트 길이, 직경 및 식립 위치에 따른 임플란트 안정성에 관한 후향적 연구

김지혜,전진용,허유리,손미경,Kim, Ji-Hye,Jeon, Jin-Yong,Heo, Yu-Ri,Son, Mee-Kyoung 대한치과보철학회 2013 대한치과보철학회지 Vol.51 No.4

연구 목적: 이 연구는 임플란트 직경, 길이 및 식립 부위가 임플란트의 안정성에 미치는 영향을 후향적 평가를 통해 비교, 분석하고자 하였다. 연구 대상 및 방법: 72명의 환자에게 식립된 총 90개의 임플란트(US II plus$^{TM}$, Osstem co, Busan, Korea)를 대상으로 임플란트 식립 직후와 인상 채득 당시에 공진주파수분석법(RFA)으로 임플란트 안정성 지수(ISQ)가 측정되었다. 상 하악에 식립된 직경은 4 mm와 5 mm이고 길이는 10 mm, 11.5 mm, 13 mm인 임플란트가 실험대상으로 선택되었다. 측정된 ISQ 값의 평균과 표준편차를 구하고 우선적으로 성별에 따른 차이를 확인하기 위하여 Independent t-test를 시행하였다. 임플란트 직경, 길이, 식립부위에 따른 ISQ 값의 실험군간 차이는 One-way ANOVA를 이용해 분석하였고, 사후검정을 위해 Tukey HSD test가 사용되었다. 임플란트 식립시와 인상채득시의 차이는 paired t-test로 분석하였다. 결과:인상채득시가 임플란트 식립 직후보다 임플란트 안정성의 증가가 관찰되었다. 임플란트 길이가 증가할수록 ISQ 값은 증가하였으나 통계적으로 유의적인 차이를 보이지 않았다. 직경 5 mm 임플란트는 4 mm 임플란트 보다 유의성 있게 높은 ISQ 값을 보였다(P<.05). 하악에 식립된 임플란트가 상악보다 더 높은 ISQ값을 보였다(P<.05). 결론:본연구결과, 임플란트 안정성을 높이기 위해서는 직경이 큰 임플란트를 사용하는 것이 효과적임을 알 수 있었다. 또한, 상악보다는 하악에서 더 높은 임플란트 안정성이 확인되었다. 임플란트 식립 직후의 일차 안정성보다 골유착 후 이차 안정성이 더 높게 나타남으로서 RFA를 이용한 방법이 골유착을 통한 임플란트 안정성의 변화를 평가함에 있어 임상적으로 유용한 것으로 판단된다. 임플란트 안정성 평가와 이에 영향을 주는 요소들에 대한 고려는 임플란트 하중 시기를 결정하고 임플란트 성공률을 증가시키는데 도움이 될 것이다. Purpose: The aim of this retrospective study was to evaluate the influence of implant diameter, length and placement to implant stability. Materials and methods: Total 90 implants (US II plus$^{TM}$, Osstem co, Busan, Korea) of 72 patients were determined as experimental samples. The factors of diameters(${\phi}$ 4 mm, ${\phi}$ 5 mm), lengths (10 mm, 11.5 mm, 13 mm), and implant placement (maxilla, mandible) were analyzed. The stability of the implants was measured by resonance frequency analysis (RFA) at the time of implant placement and impression taking. The difference of ISQ values according to patient's gender was evaluated by Independent t-test. ISQ values were compared between implant diameter, length and placement using one-way ANOVA and Tukey HSD test (${\alpha}=.05$). To compare ISQ values between at the time of surgery and impression taking, paired t-tests were used (${\alpha}=.05$). Results: The change of implant length did not show significant different on the ISQ value (P>.05). However, 5 mm diameter implants had higher ISQ values than 4 mm diameter implants (P<.05). Implants placed on the mandible showed significantly higher ISQ values than on the maxilla (P<.05). Conclusion: In order to increase implant stability, it is better to select the wider implant, and implants placed on mandible are possible to get higher stability than maxilla. ISQ values at impression taking showed higher implant stability than ISQ values at implant placement, it means that RFA is clinically effective method to evaluate the change of implant stability through the osseointegration. The consideration of the factors which may affect to the implant stability will help to determine the time of load applying and increase the implant success rate.

컨디셔닝 및 반전이 톨 페스큐 건초의 건조율에 미치는 영향

김지혜,최기춘,김현섭,박형수,Kim, Ji Hye,Choi, Ki Choon,Kim, Hyeon Seop,Park, Hyung Soo 한국초지조사료학회 2016 한국초지조사료학회지 Vol.36 No.4

본 연구는 2013년 5월 22일~24일 3일에 걸쳐 톨 페스큐엔도파이트 프리 품종인 Jesup을 공시하여 톨 페스큐 위주의 목초지에서 수행되었다. 시험기간 평균 온도는 $20.7^{\circ}C$였고 상대습도는 3일평균 64.8%였다. 일조시간은 3일평균 9.27시간으로 건초를 조제하기에 알맞은 기상조건이었다. 컨디셔너별 처리 (임펠러, 로울러)와 무처리로 3가지 처리를 비교하였고, 반전횟수에 따른 차이를 확인하기 위해 임펠러 컨디셔너로 예취한 후 1일 1회 반전, 1일 2회 반전 두 처리를 두었다. 임펠러와 로울러의 수분함량 변화는 둘째날 5월 23일 13시 임펠러 37.30%, 로울러 33.64%였고 무처리구는 51.75%로 컨디셔닝 처리한 두 구와 차이가 컸다. 24일 13시 측정된 수분함량은 임펠러 20.32%, 로울러 19.37%로 20% 전후를 보였고, 무처리구는 28.84%로 약 8~9%의 차이를 보였다. 반전횟수 차이를 보는 실험에서는 23일 13시 1회반전 37.53%, 2회 반전 35.23%였고 24일 13시 1회 반전시 20.48%, 2회 반전시 16.74%로 나타났다. 건초 사료가치 분석 시 컨디셔너별 CP 함량은 무처리 12.5% 임펠러 12.7% 로울러 12.9% 나타났고, ADF는 무처리 37.2%, 임펠러 37.2%, 로울러 35.1%로 나타나 NDF, TDN, RFV 모두 차이는 없었다. 1회 반전시 CP 함량은 12.7%, 2회 반전 12.8%였고 반전횟수에 따른 사료가치의 차이는 없는 것으로 판단된다. This study evaluated the effect 3 types of conditioning (Untreated, Impeller, Roller) and the number of times for tedding (rake-teder) performed in one day on the drying rate of tall fescure hay. The experiment was performed at The forage site of Cheonan-si seongwhan-eup National Institute of Animal Sciencee. It took 3 days to make tall fescue hay. The Impeller and Roller conditioning types shortened the haymaking period by 1 day compared to untreated hay. Impeller and roller samples had less than 20% of water content by the $23^{rd}-day$ at 13 o'clock. Tedding frequency failed to affect haymaking. There was no correlation between the three types of conditioning or tedding frequency and acid digestible fiber (ADF), neutral detergent fiber (NDF), total digestible nutrients (TDF), crude protein (CP), or relative feed value (RFV) in tall fescue hay. CP was 12.5~12.9% for the three types of conditioner with 1 or 2 times of tedding a day, Threrfore, conditioner types and gedding frequency had no significant effect on CP.

타이타늄 표면 코팅 처리에 따른 타이타늄도재관의 파절강도 비교

김지혜,박상원,방몽숙,양홍서,박하옥,임현필,오계정,김현승,이광민,이경구,Kim, Ji-Hye,Park, Sang-Won,Vang, Mong-Sook,Yang, Hong-So,Park, Ha-Ok,Lim, Hyun-Pil,Oh, Gye-Jeong,Kim, Hyun-Seung,Lee, Kwang-Min,Lee, Kyung-Ku 대한치과보철학회 2007 대한치과보철학회지 Vol.45 No.2

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

골반동작을 이용한 체간조절이 편마비 환자의 족저압에 미치는 영향

김지혜,황병용,오태영,Kim, Ji-Hye,Hwang, Byong-Yong,Oh, Tae-Young 대한물리치료학회 2007 대한물리치료학회지 Vol.19 No.5

Purpose: The purpose of this study was to examine effect of trunk control using pelvic movements upon the foot pressure in patients with hemiplegia. Methods: Twelve males with hemiplegia were the procedure executed turnk control using pelvic movements. The foot pressure were measured using Parotec-system. Results: The data were analysed with paired t-test. First, there was a significant increase in external and internal sensors of dynamic foot pressure change of the hindfoot before and after therapy. Also there was significant increase in hallux (p<0.05). Second, there was a significant increase of affected side in support phase(p<0.05) and decreased of affected side in overlapping phase(p<0.05). Third, there was a significant increase in foot floor contact time and impulse pressure rate between affected and non affected side(p<0.05). Conclusion: The trunk control with pelvic movement had an significant effect on the legs by increase activities of hip flexors and abductors. Also had an effect on ankle dorsiflexion and plantar flexor by biomechanical movement.