http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전기자동차 화재에 따른 지하주차장 내화설계 개선 필요성 검토
김해나 ( Kim Hae-na ),박준서 ( Park Jun-seo ),신종현 ( Shin Joung-hyeon ),홍상훈 ( Hong Sang-hun ),정의인 ( Jung Ui-in ),김봉주 ( Kim Bong-joo ) 한국건축시공학회 2022 한국건축시공학회 학술발표대회 논문집 Vol.22 No.2
Electric vehicle fires in underground parking lots are very dangerous, but it is judged that the current related laws and regulations do not change, which will cause problems. As a result of the analysis for the purpose of providing an electric vehicle in an underground parking lot, fire-resistance coating is essential as it can cause an explosion in the building members made of high-strength concrete when an electric vehicle fire occurs in an underground parking lot. Since a fire occurs, it is necessary to prevent electric vehicles from parking adjacent to each other.
수질오염총량관리 단위유역의 유량변화 특성분석 -금강수계를 대상으로-
박준대 ( Jun Dae Park ),오승영 ( Seung Young Oh ),최옥연 ( Ok Youn Choi ) 한국물환경학회 2011 한국물환경학회지 Vol.27 No.6
The variation of streamflow is regarded as one of the most influential factors on the fluctuation of water quality in the stream. The characteristics of the variation should be taken into account in the plans for the management of Total Maximum Daily Loads (TMDLs). This study analysed and characterized spatial distribution and temporal variation of streamflow at each unit watershed in Guem-river basin. For the analysis of the distribution of streamflow, the type and the extent of the distribution were investigated for the unit watershed. For the analysis of the variation, short and long term changes of streamflow were examined. The result showed that most of the distributions were not log-normalized and the extent of variation tends to be greater at the unit watershed placed on the tributaries in the basin. A kind of margin could be granted to the unit watershed involving high variations so as to establish the water quality goal and load allotment more reasonably and effectively in view of whole waterbody.
적외선 영상에서 모폴로지와 가우시안 거리함수를 이용한 소형표적 검출
박준재(Jun-Jae Park),안상호(Sang-Ho Ahn),김종호(Jong-Ho Kim),김상균(Sang-Kyoon Kim) 한국산업정보학회 2012 한국산업정보학회논문지 Vol.17 No.4
본 논문에서는 모폴로지 연산을 기반으로 소형 표적 후보를 찾고, 변형된 가우시안 거리 함수를 이용해서 소형 표적을 검출하는 방법을 제안한다. 기존의 소형 표적 검출 방법은 예측 필터를 이용하는 방법과 모폴로지를 이용하는 방법이 있다. 예측필터를 이용하는 방법의 경우 최소 오차 수렴 시간이 오래 걸리고, 모폴로지를 이용하는 방법의 경우 클러터에 취약하고, 소형 표적의 크기를 고려하여 구조요소의 크기를 선정해야 하는 단점이 있다. 본 논문에서는 기존 연구 방법의 단점을 보완한 강인한 소형 표적 검출 방법을 제안한다. 제안하는 방법은 먼저 미디언 필터를 사용해서 클러터를 제거한다. 다음으로 다양한 크기의 구조 요소를 이용해 닫힘 연산과 열림 연산을 수행하고, 닫힘 연산 결과와 열림 연산 결과를 차 연산 하여 표적 후보 화소를 구한다. 정확한 소형 표적을 검출하기 위해 표적 후보 영역에서 가우시안 거리 함수를 이용하여 표적을 검출한다. 제안한 방법은 클러터에 민감하지 않고, 98%의 검출율을 보였다. We propose a method that finds candidate targets based on morphology and detects a small target from them using modified gaussian distance function. The existing small target detection methods use predictive filters or morphology. The methods using predictive filters take long to approach least errors. The methods using morphology are weak at clutters and need to consider size of a small target when selecting size of structure elements. We propose a robust method for small target detection to complete the existing methods. First, the proposed method deletes clutters using a median filter. Next, it does closing and opening operation using various size of structure elements, and figures target candidate pixels with subtraction operation between the results of closing and opening operation. It detects an exact small target using a gaussian distance function from the candidates target areas. The proposed method is less sensitive to clutters, and shows a detection rate of 98%.
박준무(Jun-Mu Park),이승효(Seung-Hyo Lee),우상균(Sang-Kyun Woo),추인엽(In-Yeop Chu),이명훈(Myeong-Hoon Lee) 한국표면공학회 2018 한국표면공학회지 Vol.51 No.5
Harsh seawater environment is subdivided into marine atmosphere, splash zone, tidal zone, submerged zone and bottom of sea depending on the exposed part. Since corrosion rate depends on the conditions of the exposed parts, proper protection and maintenance for each parts are essential for long-term use of steel structures in seawater environment. For steel structures which were installed in Shiwha Lake, a special maintenance system is required to guarantee its long-term durability and safety. As the tidal power plant has recently been operated, the salinity has risen due to the rapid influx of seawater upstream into Sihwa Lake and the corrosion tendency of the structure is variable according to the water level fluctuation. In this study, corrosion properties of steel structures under water level fluctuation was evaluated by corrosion rate measurement, visual inspection and natural potential measurement and their durability and life management were discussed in view of the effect of variation in of seawater level fluctuations in Shihwa Lake.
충격보강제로 강인화된 PLA와 cellulose ester 블렌드의 상용성 및 모폴로지, 열적, 기계적 특성에 관한 연구
박준서(Park, Jun-Seo),남병욱(Nam, Byeong-Uk) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.7
CAB는 광학적 특성이 우수한 생분해성 수지이나 취약한 가공성으로 인해 필름 어플리케이션에 제한되어 있다. 본 실험에서는 비교적 가공성이 우수한 폴리락틱산을 이용하여 CAB의 가공성을 향상시키고, 충격보강제 도입으로 기계적 물성 을 보완하고자 하였다. 이전 실험에서 PLA/CAB binary 블렌드의 PLA75CAB25조성이 상용성을 보이는 것을 확인하였으므 로 PLA75CAB25 조성에 한하여 충격보강 연구를 수행하였다. 이축압출기를 이용하여 충격보강제를 도입하고, 140℃ (hopper)-200℃(die)의 온도 범위에서 200rpm의 속도로 제조하였다. 충격보강제 도입에 따른 상용성을 평가하기 위해 DSC와 FE-SEM을 통해 유리전이온도 거동과 모폴로지를 관찰하였다. 또한 충격보강효과를 확인하기 위해 DMA와 Izod 충격강도 시험기를 이용하여 저장탄성률과 충격강도를 측정하였다. 충격보강제가 10wt%가 도입되었을 때 상용성이 가장 좋았으며, Izod 충격강도가 PLA75CAB25 조성에 비해 4배 이상 향상되었음을 확인하였다. Cellulose acetate butyrate (CAB) is a biodegradable resin with excellent optical properties, but it is difficult to apply film process. In this study, an attempt was made to improve the processability of CAB using polyactic acid and the mechanical properties using an impact modifier. Polylacitc acid (PLA)/Cellulose acetate butyrate (CAB) blends with an impact modifier were prepared using a twin screw extruder. The temperature range was 140℃ to 20 0℃, and the screw speed was fixed to 200 rpm. To evaluate the miscibility of impact modified CAB/PLA, the glass transition behavior and morphology were observed by DSC and FE-SEM. The mechanical properties were investigated by dynamic mechanical analysis (DMA) and a Universal Testing Machine (UTM). In addition, the effect of an impact modifier in the polymer matrix was determined using a notched Izod impact strength tester. Finally, the PLA/CAB/impact modifier 75/25/10 ratio was found to be a compatible system. In the 10wt.% impact modifier, the sample had a 4 times higher izod impact strength than the non-toughening composition.
고밀도 폴리에틸렌과 실란 처리된 분쇄페놀수지 복합재의 제조 및 특성
박준서(Jun-Seo Park),한창규(Chang-Gue Han),남병욱(Byeong-Uk Nam) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.9
페놀수지는 열경화성 수지로서 우수한 내열성 및 기계적 물성을 가지고 있다. 하지만 열경화 특성으로 인해 사용 후 재활용이 어렵고, 전체 생산량의 15∼20%가 스프루와 런너 형태로 폐기되고 있다. 4만 톤의 페놀수지 스프루와 런너가 버려지고 있으며 폐기된 페놀 스프루와 런너 처리비용은 연간 200억원으로 추정된다. 본 실험에서는 폐기되는 스프루와 런너를 분쇄하고 폴리에틸렌과의 표면접착력 향상을 위해 실란 표면처리를 하였다. 분쇄된 입자의 크기는 100∼1000um의 분체와 1∼100um의 미분으로 나누어 실험하였다. 분쇄된 페놀은 실란 작용기에 따른 특성을 평가하기 위해 3-(Methacryloyloxy) propyltrimethoxysilane 과 Vinyltrimethoxy silane으로 처리되었다. 입자의 크기를 분석하기 위해 입도분석기를 사용였다. 열적특성은 DSC(Differential Scanning Calorimetry)와 HDT(heat deflection temperature)를 통하여 분석하였다. 기계적 물성의 측정은 UTM(universal testing machine)과 notched izod impact tester로 평가하였다. 전처리한 페놀수지 파우더를 첨가시, 고밀도 폴리에틸렌(HDPE)의 열변형온도가 77℃에서 최대 96℃까지 향상되었으며, 결정화도와 결정화 온도가 증가하였다. 결론적으로, 실란 전처리 하지 않았을 경우와 비교했을 때 충격강도는 50%가 인장강도는 20%가 상승하였다. Phenolic resin has excellent heat resistance and good mechanical properties as a thermosetting resin. However, its thermosetting characteristics cause it to produce a non-recyclable waste in the form of sprue and runner which is discarded and represents up to 15∼20% of the overall products. Forty thousand tons of phenolic resin sprue and runner are disposed of (annually). The (annual) cost of such domestic waste disposal is calculated to be 20 billion won. In this study, discarded phenol resin scraps were pulverized and treated by silanes to improve their interfacial adhesion with HDPE. The sizes of the pulverized pulverulent bodies and fine particles were (100um∼1000um) and (1∼100um), respectively. The pulverized phenol resin was treated with 3-(methacryloyloxy) propyltrimethoxysilane and vinyltrimethoxy silane and the changes in its characteristics were evaluated. The thermal properties were evaluated by DSC and HDT. The mechanical properties were assessed by a notched Izod impact strength tester. When the silane treated phenol resin was added, the heat distortion temperature of HDPE increased from 77℃ to 96℃ and its crystallinity and crystallization temperature also increased. Finally, its impact strength and tensile strength increased by 20% and 50%, respectively, in comparison with the non-treated phenol resin.