http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공침법에 의한 $\delta$-FeOOH의 제조 및 자기 특성
김성재,김태옥 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.3
$\delta$-FeOOH was prepared by rapid oxidation method of Fe(OH)2 using H2O2. The effects of reaction temperature and mole ratio ([OH-]/[Fe2+])의 몰비를 제조 변수로 하여 최종 생성된 $\delta$-FeOOH의 입자크기 입자형태, 자기특성을 조사하였다. Fe(OH)2 의 반응온도 및 [OH-]/[Fe2+] 비가 $\delta$-FeOOH의 입자크기 및 형상에 많은 영향을 미침을 알수 있었으며 입자 크기는 이 두인자에 비례하여 증가하였다 Fe(OH)2 의 반응온도가 4$0^{\circ}C$ [OH-]/[Fe2+]=5 Fe(OH)2 숙성 시간 2시간에서 제조된 $\delta$-FeOOH를 TEM, VSM으로 입자의 크기 및 자기특성을 조사한결과 평균 입경이 630$\AA$ 정도이고 입도 분포가 양호하였으며 포화자화 및 보자력은 각각 20.8emu/g 210 Oe였다.
원료 분말의 혼합 시간에 따른 소결 Mg-Ferrite의 전기.자기적 특성 변화
김성재,백종규 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.3
As the results of the study on the effects of mixing time for raw materials to the electric and magnetic properties of Mg-ferrite, the fraction of spinel phase after calcination and the geometry density of sintered Mg-ferrite increased from 30% to 100% and from 2.5g/cc to 4.25g/cc respectively due to mixing-homobenity of raw materials. The AC resistivity of grains decreased and lattice parameter, saturation magnetization increased due to the increase in Fe+2 of sintered body. conclusively the characteristic of powder after calcination had strong influence on the microstructure, electric, and magnetic properties in Mg-ferrite sintered body.
미세 구조가 Mg-페라이트 소결체의 자성에 미치는 영향
김성재,정명득,백종규 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.4
Effects of microstructure of two Mg-ferrite specimens with the same starting composition and relative density but with different grain size on B-H hysteresis loop, natural resonance frequency, and ferromagnetic resonance line width are reported. Such properties as B-H hysteresis loop, saturation magnetization, natural resonance frequency, and ferromagnetic resonance line width were influenced by the microstructure development during sintering. Large grain size specimen showed high saturation magnetization, low coercive force, low natural resonance frequency, and low ferromagnetic resonance line width compared with the specimen of small grain size. The main reason for the changes in properties can be explained by the variation in anisotropic characteristics due to Fe+2 content generated during sintering process.
단결정 MgO와 분말 $Fe_2O_3$간의 고상 반응 연구
김성재,박재우 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.2
MgFe2O4 formation, grain growth in Fe2O3, Fe solid-solution limit in MgO for MgO-Fe2O3 mixture were studied by means of investigating the distribution of phases and compositions in reaction area between MgO and Fe2O3. The reaction area at equlibrium was composed with MgO-FexO matrix and MgFe2O4 precipitation, MgFe2O4 was formed by precipitating from MgO-FexO matrix dependent on oxygen partial pressure. Fe contents was exponentially decreased with diffusion distance in MgO single crystal, and thus Fe solid-solution limitation in MgO was about 4mol%. The grain growth rate in Fe2O3 base was increased with Mg contents diffused from MgO single crystal.
하소온도에 따른 Mg-페라이트 소결체의 미세구조 및 전기.자기적 특성 연구
김성재,정명득,백종규 한국세라믹학회 1995 한국세라믹학회지 Vol.32 No.1
Effects of calcination temperature on microstructure and electric-magnetic properties of Mg-ferrite were investigated. As the calcination temperature increase, the green density and the sintered density increase due to the enhancement of densification of calcined powder. The grain size in the sintered ferrite increases with increasing the calcination temperatures from 800 to 100$0^{\circ}C$, but decreases from 1000 to 120$0^{\circ}C$. The resistivity decreases with increasing the calcination temperatures from 800 to 110$0^{\circ}C$, but increases from 1100 to 120$0^{\circ}C$ due to the microstructure which consists of small, uniform grian size and pores at grain boundaries. Magnetization increases slightly due to the increasement of the sintered density while Curie temperature is almost constant regardless of calcination temperatures.
$Mg_{1.9-2x}Mn_{0.05}Fe_{4x}O_{4+${\gamma}$}+2_{wt%} Al_2O_3$ 조성내 Fe량 변화에 따른 페라이트의 미세구조 및 자기적 특성 연구
김성재,정명득,강대석 한국세라믹학회 1994 한국세라믹학회지 Vol.31 No.3
The electric and magnetic properties of Mg1.9-2xMn0.05Fe4xO4+${\gamma}$+2wt% Al2O3, and its microstructure have been investigated as a function of ferrite composition (x=0.45, 0.5, 0.55). The microstructure turned out to be independent on the ferrite composition. The resistivity was decreased with increasing Fe contents, whereas the Curie temperature decreased. Saturation magnetization was varied from 1741 to 2022 G with composition, and squareness ratio (SR), coercive force (BHc) were decreased and increased with increasing Fe contents respectively, so the sample which SR and BHc were 0.97 Oe and 1.49 Oe can be attainable at x=0.45.
글리치 전력소모감소를 위한 게이트 사이징과 버퍼삽입 혼합기섭
김성재,이형우,김주호,Kim, Seong-Jae,Lee, Hyeong-U,Kim, Ju-Ho 한국정보과학회 2001 정보과학회논문지 : 시스템 및 이론 Vol.28 No.8
본 논문은 CMOS 디지털 회로에서 글리치(glitch)에 의해 발생하는 전력소모를 줄이기 위한 효율적인 휴리스틱 알고리즘을 제시한다. 제안된 알고리즘은 사이징되는 게이트의 위치와 양에 따라 게이트 사이징을 세 가지 type으로 분류한다. 또한 버퍼삽입은 삽입되는 버퍼의 위치에 따라서 두 가지 type으로 분류한다. 글리치 제거 효과를 극대화하기 위해서 비용과 이득의 상관관계를 고려하여 하나의 최적화 과정 안에서 세 가지 type의 게이트 사이징과 두 가지 type의 버퍼삽입을 혼합한다. 제안된 알고리즘은 0.5$\mu\textrm{m}$ 표준 셀 라이브러리(standard cell library)를 이용한 LGSynth91 벤치마크 회로에 대한 테스트 결과 효율성을 검증하였다. 실험결과는 평균적으로 69.98%의 글리치 감소와 28.69%의 전력감소를 얻을 수 있었으며 이것은 독립적으로 적용된 게이트 사이징과 버퍼 삽입 알고리즘에 의한 것 보다 좋은 결과이다.