http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소프트 에러 발생 시 자동 복구하는이중 코어 지연 락스텝 프로세서의 설계
김주호,양성현,이성수 한국전기전자학회 2023 전기전자학회논문지 Vol.27 No.4
In this paper, we designed a Delayed Dual Core Lock-Step (D-DCLS) processor where two cores operate sameinstructions with delay and the result is compared to mitigate soft errors and common mode failures in automotiveelectronic systems. Because D-DCLS does not know which core an error occurred in, each core must be recoveredto the point before the error occurred, but complex hardware modifications are required to return all intermediatevalues on the pipeline stage. In this paper, in order for easy hardware implementation, all register values are savedto a buffer whenever a branch instruction is executed. When an error is detected, the saved register values areautomatically restored, and then ‘BX LR’ instruction is executed to return to the last branch point. The proposedD-DCLS processor was designed using Verilog HDL and was confirmed to continue normal operation afterautomatically recovering error 본 논문에서는 차량 전자 시스템에서 소프트 에러와 공통 고장에 대응하기 위해 두 개의 코어를 지연 동작시킨 후 그 결과를 비교하는 D-DCLS(Delayed Dual Core Lock-Step) 프로세서를 설계하였다. D-DCLS는 어느 코어에서 에러가 발생했는지 알 수 없기때문에 각 코어를 에러가 발생하기 이전 시점으로 되돌려야 하는데 파이프라인 스테이지 상의 모든 중간 계산값을 되돌리기 위해서는 복잡한 하드웨어 수정이 필요하다. 본 논문에서는 이를 쉽게 구현하기 위해 분기 명령어가 실행될 때마다 모든 레지스터 값을버퍼에 저장해 두었다가 에러가 발생하면 저장된 레지스터 값을 복구한 후 ‘BX LR’ 명령어를 수행하여 해당 분기 시점으로 자동복구하도록 하였다. 제안하는 D-DCLS 프로세서를 Verilog HDL로 설계하여 에러가 감지되었을 때 자동으로 복구한 후 정상 동작하는 것을 확인하였다.
수동 선배열 소나의 저주파 간섭 신호에 대한 독립성분분석 알고리즘 비교
김주호,이종현,정명준,Kim, Juho,Ashraf, Hina,Lee, Chong-Hyun,Cheong, Myoung Jun 한국음향학회 2019 韓國音響學會誌 Vol.38 No.2
In this paper, we proposed an application method of ICA (Independent Component Analysis) to passive line array sonar to separate interferences from target signals in low frequency band and compared performance of three conventional ICA algorithms. Since the low frequency signals are received through larger bearing angles than other frequency bands, neighboring beam signals can be used to perform ICA as measurement signals of the ICA. We use three ICA algorithms such as Fast ICA, NNMF (Non-negative Matrix Factorization) and JADE (Joint Approximation Diagonalization of Eigen-matrices). Through experiments on real data obtained from passive line array sonar, it is verified that the interference can be separable from target signals by the suggested method and the JADE algorithm shows the best separation performance among the three algorithms. 본 논문에서는 수동 선배열 소나의 저주파 영역에서 수신된 표적 신호로부터 간섭신호를 분리해 내기 위해 독립성분분석 알고리즘을 적용하는 방안을 제안하고 기존 알고리즘들의 성능을 비교해 보았다. 저주파 대역 신호의 경우 비교적 넓은 방위로부터 수신되기 때문에 인접 빔 신호를 관측신호로 활용하여 독립성분분석을 수행할 수 있다. 신호분리에 사용한 독립성분분석 알고리즘은 FastICA(Fast Independent Component Analysis), NNMF (Non-negative Matrix Factorization), JADE (Joint Approximation Diagonalization of Eigen-matrices)이다. 실측 선배열 수동소나신호를 이용하여 독립성분분석을 수행한 결과 제안한 방법으로 간섭신호분리가 가능함을 확인하였으며, JADE 알고리즘의 신호 분리 성능이 가장 우수한 것으로 나타났다.