http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
분산 무선 통신시스템 기반의 Dual Virtual Cell 시스템의 제안 및 성능분석
양주영,김정호,Yang Joo-Young,Kim Jeong-Ho 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.6B
본 논문에서는 가상 셀(Virtual Cell)이라는 새로운 개념을 도입하여 사용자의 움직임에 따라 셀(Cell)이 동적으로 바뀌어서 핸드오프의 문제가 없으며, 사용자 간, 셀 간에 야기되는 간섭을 모니터링 할 수 있고 또한 상호 간섭을 최소화하도록 제어할 수 있어서 기존 셀룰라 시스템이 안고 있는 간섭 문제를 효과적으로 극복할 수 있는 분산무선통신시스템에 관하여 소개한다. 그리고 이러한 분산무선시스템을 기반으로 하여 사용자 통신의 링크 품질을 지속적으로 유지하면서 용량을 향상시키고자 하는 Dual Virtual Cell(DVC) 개념과 운용 방안을 제안하였다. DVC 시스템은 단말의 실제 트래픽을 위한 Active Virtual Cell 외에, 사용자 통신의 다음 시점의 도달 범위 예측과 사용자 무선링크의 품질저하 및 단절을 방지하기 위한 후보군의 분산안테나들의 집합인 Candidate Virtual Cell을 도입하여 이러한 이중구조의 가상 셀을 동시에 관리함으로써, 채널정보 획득에 대한 단말의 부담을 줄이고 채널추정정보에 대한 시간지연과 단말의 이동으로 인한 무선링크 단절 및 품질 저하를 방지하며 신속한 통신채널 변경을 지원할 수 있다. 제안하는 시스템에서는 DVC의 안테나 구성을 위하여 안테나 선택기법을 이용하고 있으며, 시스템 오차 확률 개선을 위하여 Space-Time Trellis Code를 도입하였다. In order to achieve high capacity and reliable link quality in wireless communication, the significant efforts should be concentrated on mitigating interference between cells. To solve the interference problem, the newly introduced concept of a Distributed Wireless Communication System (DWCS) can provide the capability of joint control of the signals at multiple cells. This paper proposes a new concept of virtual cell: the Dual Virtual Cell (DVC), and also proposes DVC employment strategy based on DWCS network. The proposed system manages two kinds of virtual cell. One is the Active Virtual Cell which exists for user's actual data traffic and the other is the Candidate Virtual Cell which contains a set of candidate antennas to protect user's link quality from performance degradation or interruption. The proposed system constructs DVC by using antenna selection method. Also, for multi-user high-rate data transmission, the proposed system introduces multiple antenna technology to get a spatial and temporal diversity gam and exploits space-Time Trellis Codes known as STTC to increase a spectral efficiency.
양주영,김수찬,박준모 한국융합신호처리학회 2018 융합신호처리학회 논문지 (JISPS) Vol.19 No.2
Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating. 용접예열은 본 용접 전에 금속이 융착되는 모재면을 일정한 온도로 가열하는 것을 의미한다. 냉각속도 조절에 따른 재료 경화 정도 감소, 불순물 편석억제, 열적 변형방지, 그리고 수분제거 등 인접 영향부의 균열을 방지할 수 있다. 이러한 이유에서 고품질의 용접을 위하여 반드시 필요한 작업이다. 유도가열은 전자기유도 현상을 응용하여 전기에너지를 열에너지로 변환시키는 효율적인 가열방식이다. 기체 및 액체를 이용한 연소발열과 비교하여 신속한 가열뿐만 아니라 청결하고, 안정적이며, 경제적이다. 단순한 구조로 주파수와 코일의 형태를 변형하여 가열체의 형상, 깊이, 재질에 관계없이 가열할 수 있다. 본 논문에서는 유도가열 기법을 이용하여 저주파 용접예열 시스템을 구현하였으며, 3종의 자동차 변속기 부품을 대상으로 권선코일 내에서 각 변속기 높이에 따라 권선코일 저항, 인덕턴스 및 자동차 변속기 부품의 온도변화를 관찰한 결과 전류의 변화는 저주파 가열에 있어 매우 중요한 요인으로 작용함을 확인하였다.