폐의 경흉 세침흡인 세포검사

김민석,박인애,박선후,박성신,김활웅,문경철,김영아,이혜승,박기화,서정욱,이현순,함의근,Kim, Min-Suk,Park, In-Ae,Park, Sun-Hoo,Park, Sung-Shin,Kim, Hwal-Wong,Moon, Kyung-Chul,Kim, Young-Ah,Lee, Hye-Seung,Park, Ki-Wha,Seo, Jeoug-Wook,Lee, Hy 대한세포병리학회 1999 대한세포병리학회지 Vol.10 No.1

The authors analysed 2,653 cases of transthoracic fine needle aspiration cytology of the lung to evaluate the diagnostic accuracy and its limitation. A comparison was made between the original cytologic and the final histologic diagnoses on 1,149 cases from 1,074 patients. A diagnosis of malignancy was established in 38.3% benign in 48.1%, atypical lesion in 2.3%, and inadequate one in 11.9% of the cases. Statistical data on cytologic diagnoses were as follows; specificity 98.9%: sensitivity of procedure, 76.8%: sensitivity of diagnosis, 95.5%: false positive 5 cases: false negative 18 cases: predictive value for malignancy, 98.8%: predictive value for benign lesion, 79.5%: overall diagnostic efficiency, 87.5%: typing accuracy in malignant tumor, 80%.

자동차(自動車) 폐촉매(廢觸媒)의 침출액(浸出液)으로부터 시멘테이션에 의한 백금족(白金族) 금속(金屬)의 회수(回收)

김민석,김병수,김은영,김수경,류재욱,이재천,Kim, Min-Seuk,Kim, Byung-Su,Kim, Eun-Young,Kim, Soo-Kyung,Ryu, Jae-Wook,Lee, Jae-Chun 한국자원리싸이클링학회 2011 資源 리싸이클링 Vol.20 No.4

금속분말을 환원제로 사용하는 시멘테이션에 의하여 자동차 폐촉매의 침출액과 침출잔사의 세척액으로부터 백금족 금속을 환원 석출시켜 회수하는 연구를 수행하였다. 환원제로 사용한 알루미늄, 마그네슘 그리고 아연이 백금족 금속의 시멘테이션에 미치는 영향을 조사하였으며 알루미늄을 최적 환원제로 선정하였다. 침출액에 19.3 당량의 알루미늄을 첨가하고 $50{\sim}60^{\circ}C$에서 10분간 시멘테이션을 행하였을 때 백금, 팔라듐, 로듐의 환원석출율은 각각 99.3%, 99.4%, 90.2% 정도 이었다. 또한 세척액에 알루미늄을 45 당량 투입한 후 시멘터이션 반응을 통해 백금, 팔라륨, 로듐을 각각 97%, 97%, 90% 회수할 수 있었다. 그리고 회수한 환원석출물의 금속불순물들을 질산침출로 제거함으로써 백금족 금속의 품위를 약 10% 정도 향상시킬 수 있었다. The recovery of platinum group metals (PGMs) from the leach solution of spent auto-catalyst and the wash solution of the leach residue was investigated in the laboratory scale experiments by the cementation process using metal powders as the reductant. In this study, the effect of Al, Mg and Zn powders on the cementation process was particularly examined. Aluminum powder was selected as the most suitable reductant for the cementation of PGMs. At the cementation time of 10 minute under the aluminium stoichimetric amount of 19.3 and the reaction temperature of $50{\sim}60^{\circ}C$, the recovery of platinum group metals from the leach solution of the spent auto-catalyst was found to be 99.3%, 99.4%, 90.2% for Pt, Pd and Rh, respectively. Under the same conditions with the aluminium stoichimetric amount of 45, the recovery of platinum group metals from the wash solution of the leach residue of spent catalyst was observed to be 97%, 97% and 90% for Pt, Pd and Rh, respectively. In addition, it was possible to upgrade the platinum group metals in the precipitates obtained from the cementation process by about 10% through the removal of metal impurities by the nitric acid leaching at ambient temperature.

실리콘 웨이퍼 에칭공정으로부터 발생(發生)된 폐산(廢酸)을 이용(利用)한 스테인리스 스틸의 산세거동(酸洗擧動) 연구(硏究)

김민석,안종관,김홍인,김주엽,안재우,Kim, Min-Seuk,Ahn, Jong-Gwan,Kim, Hong-In,Kim, Ju-Yup,Ahn, Jae-Woo 한국자원리싸이클링학회 2008 資源 리싸이클링 Vol.17 No.2

실리콘 웨이퍼 에칭공정에서 발생하는 폐산을 스테인리스 스틸 산세공정에서 재활용하고자 이를 이용한 산세 거동을 조사하였다. 폐산 원액은 $19.6g/L^{-1}$ 실리콘을 함유한 불산, 질산 및 초산의 혼산이었으며 침전법에 의한 실리콘 제거 전후 폐산들을 이용하여 304 스테인레스 스틸 표면 산화막의 제거 시 측정된 open circuit potential(OCP) 변화 거동은 매우 상이하였다. 폐산 원액을 사용한 경우에는 OCP가 높고 연속적인 변화를 보이는데 비하여 실리콘 제거 공정에서 얻어진 용액의 경우에는 불연속적인 OCP변화와 전위요동현상이 나타났다. 이러한 거동의 차이는 표면 부동태막의 형성 및 제거와 공식이 발생하는 정도의 차이에 기인하는 것으로 생각되며, 실리콘 제거 공정에서 산도가 낮아진 폐산에서 산화막 제거속도가 높고 공식발생이 현저하였다. 산세 후 시료의 표면 광택도에 가장 큰 영향을 주는 것은 산세 온도였으며, 산세온도가 높아질수록 표면 광택도는 감소하였다. 동일 산세 조건에서는 폐산 원액을 사용한 경우가 실리콘을 제거공정으로부터 얻어진 용액을 사용한 경우보다 광택도가 높았다. Pickling of oxidized 304 stainless steel has been investigated using rotating disk electrode in waste acid solutions generated from the etching process of silicon wafer in order to recycle them. The waste acid solution contained acetic, nitric, hydrofluoric acids, and silicon of $19.6g/L^{-1}$. Electrochemical behavior during the pickling was distinctively different between the original and silicon-removed acid solutions. Open circuit potential was continuously changed in the original solution, while it was discontinuously changed and fluctuated in the silicon-removed solution. Fast and abrupt removal of surface oxide layer with severe pitting was observed in the silicon-removed solution. It was found that solution temperature had the most influential effect on glossiness. Surface glossiness after pickling was decreased with solution temperature. At the same condition, the glossiness was higher in the original solution than in the silicon-removed solution.

복시환자의 임상양상

김민석,최진,김정훈,김재석,이주화,Min Seok Kim,Jin Choi,Jung Hoon Kim,Jae Suk Kim,Joo Hwa Lee 대한안과학회 2013 대한안과학회지 Vol.54 No.11

Purpose: To evaluate the clinical features, causes and outcomes of patients with diplopia. Methods: All patients presenting with diplopia from October 2010 to March 2012 and followed up for more than 3 months were retrospectively investigated. Results: During the study period, 59 patients with diplopia were identified. There were 42 males and 17 females with an average age of 50 years. Binocular diplopia accounted for 54 cases (92%) and 5 cases (8%) had monocular diplopia. Cranial nerve palsies were the most common cause of binocular diplopia (28 cases, 52%). Within the cranial nerve palsies group, 14 cases (50%) were accompanied by hypertension or diabetes mellitus. Binocular diplopia spontaneously resolved in 35 cases (65%) by 3 months rising to 41 cases (76%) by 7 months. Thirteen (93%) out of 14 cases of cranial nerve palsies with hypertension or diabetes resolved spontaneously by 3 months. Conclusions: Binocular diplopia was caused most commonly by cranial nerve palsy and resolved after 3 months in 65% of patients. A spontaneous recovery from diplopia was observed after 3 months in 93% of patients with cranial nerve palsies and microvascular disease such as hypertension or diabetes. Therefore, the initial observation without additional treatment would be sufficient in these patients. J Korean Ophthalmol Soc 2013;54(11):1772-1777

전해생성(電解生成)된 염소(鹽素)에 의한 폐인쇄회로기판(廢印刷會路基板)으로부터 동(銅)의 침출(浸出)

김민석,이재천,정진기,김병수,김은영,Kim, Min-Seuk,Lee, Jae-Chun,Jeong, Jin-Ki,Kim, Byung-Su,Kim, Eun-Young 한국자원리싸이클링학회 2005 資源 리싸이클링 Vol.14 No.5

염산용액에서 전해생성 된 염소를 이용하여 폐프린터의 인쇄회로기판으로부터 동을 침출하는 연구를 수행하였다. 폐인쇄회로기판을 분쇄한 다음 입자크기가 $0.6{\sim}1.2mm$인 비자성 성분을 선별하여 침출실험을 행하였다. 비자성 분쇄물 중 금속성분의 평균함량은 45wt%이었으며, 동이 금속성분의 83.6wt% 이었다. 1 M 염산용액에서 전해생성된 염소에 의한 동의 침출반응은 전류밀도와 교반속도에 크게 영향을 받았다. 염산농도: 1 M, 전류밀도: $20mA/cm^2$, 침출온도: $50^{\circ}C$, 침출시간: 180분, 교반속도: 600rpm의 침출조건에서 동의 침출율은 98%로서 침출액에서 농도는 3.69g/l 해당하였다. 동의 침출반응에 대한 전해생성 된 염소의 이용율은 교반속도가 높고 인가전류밀도가 낮을 수록 높았다. 또한 침출반응 초기에는 알루미늄, 납, 주석 등의 기타금속 성분의 침출이 활발하고 동의 침출반응은 억제되었다. Electro-generated chlorine leaching of waste printed circuit boards was investigated in hydrochloric acid solutions. Non-magnetic component of $0.6{\sim}1.2mm$ was prepared by grinding, magnetic separation, and sieving. The non-magnetic component of pulverized printed circuit board contained about 45% of metal component, in which copper was about 83.6%. The leaching rate of copper was greatly affected by current density and agitation speed. The leaching of copper up to 98% was achieved at $20mA/cm^2$, $50^{\circ}C$, 180 minutes, and 600 rpm in 1M HCl solutions. Increasing agitation and lowering current density enhanced utilization efficiency of electro-generated chlorine. Leaching of copper was suppressed at the initial stage, while the minor metal elements, such as aluminum, lead, and tin, were dominantly leached out.

국내외 가축분뇨 퇴액비 이용 분야 암모니아 배출량 인벤토리 비교 연구

김민석,구남인,김정규,Kim, Min-Suk,Koo, Namin,Kim, Jeong-Gyu 한국환경생물학회 2020 환경생물 : 환경생물학회지 Vol.38 No.1

국내 발생 암모니아 중 가축분뇨의 기여율이 높은 것은 자명한 사실이다. 암모니아 배출량 산정 과정의 정확도와 신뢰도 향상을 위해서는, 가축분뇨 발생량의 정확한 집계, 가축분뇨의 퇴비화 및 액비화 과정에서 단계별 암모니아 전환량과 발생량 산출, 퇴액비의 저장 및 운송과정에서의 암모니아 발생량 산정 그리고 토양 살포 과정과 방법에 따른 암모니아 발생량 비교 연구가 반드시 수행되어야 할 것이다. 미국과 유럽과 비교해 볼 때, 특히 국내 배출계수가 상대적으로 매우 획일적이고 시공간적으로 세분화되지 못해 국내 실정을 충분히 반영하지 못하고 있다. 암모니아 배출계수 산정의 정확도와 전문성을 향상 시킬 수 있는 방안으로, 퇴액비의 특성, 토양의 특성 그리고 기후 특성의 복합적인 고려가 가능한 챔버시스템을 활용할 수 있을 것이다. 국내외 암모니아 배출과 관련한 자료의 검토와 비교를 통해 현재 국내 시스템의 부족한 점과 나아가야할 방향을 확인할 수 있었으며, 암모니아 배출유량 산정이 가능한 챔버 시스템을 제언하였다. 향후 누락배출원의 신규 배출계수 산정과 같은 실질적인 정책과의 연계를 위해서는 실내의 챔버 시스템에서 더 나아가 현장에서의 mesocosom 시스템의 방법론 구축 또한 필요할 것으로 판단된다. In Korea, more than 70% of the ammonia(NH₃) released into the atmosphere is known to originate from livestock manure. The total emission (kg year^-1) is calculated by multiplying the emission factor (kg head^-1 yr^-1) and the activity data (head). To improve the accuracy and reliability of the NH₃ emission estimation process, an accurate account of livestock manure production, calculation of NH₃ conversion and generation during the composting and liquefaction of manure, estimation of NH₃ generation in the storage and transportation of manure and compost, and a comparative study of NH₃ emission during the soil spreading process must be performed. Compared to the US and EU-28, in particular, the domestic emission factor is relatively even and the spatial/temporal scale is not broken down sufficiently to reflect the domestic situation. As a way to improve the accuracy and expertise of estimating NH₃ emission factors, a 'dynamic chamber-capture system' can be utilized, which allows complex considerations of compost, liquid manure, soil, and climate characteristics. By reviewing and comparing the data related to domestic and foreign NH₃ emission, we identified shortcomings in the current domestic system and the directions to be taken and suggested a chamber system that could estimate NH₃ emission flux. It is also necessary to establish a methodology for mesocosm systems in the field, in addition to indoor chamber systems, to be linked with practical policies, such as the calculation of new emission factors for missing sources.

딥러닝 기술을 이용한 녹조 조기예찰 방법 연구

김민석,박형욱,조현정,김은주 대한산업공학회 2021 대한산업공학회 춘계학술대회논문집 Vol.2021 No.6

승차감 관련 주관평가와 객관평가의 상관성 연구

김민석,김연태,문원길,안세진,유완석,Kim, Min-Seok,Kim, Yon-Tae,Moon, Won-Kil,Ahn, Se-Jin,Yoo, Wan-Suk 한국자동차공학회 2007 한국 자동차공학회논문집 Vol.15 No.5

In order to compare subjective and objective assessments, a passenger car was driven at several speeds over several road profiles. To measure the acceleration signals experienced by the seated subject who provided an subjective assessment, four triaxial translational accelerometers and one triaxial gyro sensor were mounted on the steering wheel and on the passenger seat and floor, respectively. Correlations were determined between the measured accelerations and the subjective assessments of 3 expert subjects and 9 general subjects using psychophysical power law.

열처리 및 단조조건에 따른 알루미늄 6056 소재의 특성변화 및 자동차의 피스톤 블록 설계

김민석,정병덕,박효영,최정묵,김정민,박준식,Kim, Min Seok,Jung, Hyung Duck,Park, Hyo young,Choi, Jeong Mook,Kim, Jeong Min,Park, Joon Sik 한국재료학회 2015 한국재료학회지 Vol.25 No.10

The mechanical properties and microstructures of Aluminum 6056 alloys were investigated for their use in the fabrication of a piton block. The EN-AW6056 alloys exhibited a tensile strength of 375 MPa for a solution treatment temperature of $550^{\circ}C$ for 2 h followed by an aging treatment at $190^{\circ}C$ for 4 h. The microstructures of the heat treated specimen showed that the $Mg_2Si$ phase with a size of 3~5 um was dispersed throughout the aluminum matrix when the heat treatment was done. Moreover, in order to identify the forgeability of the specimen, upsetting tests were done. For up to 80 % of the upsetting ratio, the specimen maintained its original shape, and at above 80 % of the upsetting ratio, the specimen underwent crack development. The specimen was successfully forged without any defects with the examined material conditions. The material conditions together with the forging conditions are discussed in terms of the microstructures and mechanical properties.

cPCR 기법을 이용한 초기배양 pH에 의한 반추위 섬유소 분해 박테리아의 부착 및 발효에 관한 연구

김민석,성하균,김현진,이상석,장종수,하종규,Kim, M.S.,Sung, H.G.,Kim, H.J.,Lee, Sang-S.,Chang, J.S.,Ha, J.K. 한국축산학회 2005 한국축산학회지 Vol.47 No.4

본 연구는 배양초기 pH 조건이 F. succino- genes의 섬유소 부착과 섬유소 소화에 미치는 영향을 보고자 실시하였다. 선정된 specific primer를 이용하여 F. succinogenes의 genomic DNA로부터 445bp의 16S rDNA 절편을 증폭하여 205bp의 internal control을 제작하였고, cPCR 결과로부터 박테리아 수를 계산할 수 있는 표준곡선의 회귀식($r^2$>0.99)을 얻을 수 있었다. In vitro 배양초기 pH에 따른 F. succ- inogenes의 cellulose 부착을 cPCR로 모니터링한 결과, 발효과정 전 기간동안 초기 pH가 6.8과 6.2일 때 cellulose 건물 g당 부착 균주의 수가 pH 5.6일 때 보다 높았으나, pH 6.8과 6.2 사이에서는 큰 차이는 없었다(p>0.05). Cellulose 분해는 배양시간이 진행됨에 따라 증가 되었으며, 분해 정도는 pH가 증가함에 따라 더 높았다. 배양초기 pH가 6.8, 6.2 그리고 5.8일 때 48시간동안 감소한 pH는 각각 0.24, 0.58 그리고 0.16 이었다. 가스 생산량은 발효 시간이 경과함에 따라 pH가 높을수록 더 많았다. 결론적으로 발효 초기 pH는 F. succinogenes에 의한 cellulose 소화, 가스 생산, pH 변화 및 cellulose 부착에 큰 영향을 주었으며, 특히, 낮은 pH(5.8)에서는 섬유소 소화 및 박테리아 부착을 현저한 감소 시켰다. The cPCR technique was used to monitor rumen fermentation and attachment of Fibrobacter succinogenes to cellulose at different pH in the in vitro culture medium. The target fragments of 16S rDNA(445 bp) were amplified from genomic DNA of F. succinogenes with specific primers and internal controls(205 bp) were constructed. Cell counts were estimated from the amounts of genomic DNA, which was calculated from cPCR results. F. succinogenes in pH 6.8 and 6.2 showed apparently higher attachment than in pH 5.8 during all incubation time. There were some difference between pH 6.8 and 6.2 in the degree of attachment, but the different was not significant (P>0.05). Cellulose degradation increased in process of incubation time and the increasing rate was higher when initial pH was higher. The pH in culture medium decreased regardless of initial pH in course of incubation time. After 24 h of incubation, medium pH was dropped by 0.24, 0.58 and 0.16 units from original medium pH 6.8, 6.2 and 5.8, respectively. More gas was produced at higher initial pH in the same manner as in cellulose degradation. In summery, Initial pH of rumen culture in vitro significantly influenced cellulose digestion, gas production, pH change and bacterial attachment. Especially, low pH(5.8) resulted in much lower bacterial attachment and fiber digestion compared to higher medium pH.