SHS 공정에 의해 제조된 Mo_xW_1-xSi₂ 발열체의 열화메커니즘

이동원,이상헌,김용남,이성철,구상모,오종민,Lee, Dong-Won,Lee, Sang-Hun,Kim, Yong-Nam,Lee, Sung-Chul,Koo, Sang-Mo,Oh, Jong-Min 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.10

The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.

Effect of post annealing on the microstructure, mechanical properties, and failure of Mo_xW_1-xSi₂ heaters produced by self-propagating high-temperature synthesis

Cho, Myung-Yeon,Lee, Sung-Chul,Park, Chulhwan,Lee, Daeseok,Koo, Sang-Mo,Moon, Kyoung-Sook,Lee, Dong-Won,Oh, Jong-Min Elsevier 2019 INTERMETALLICS Vol.110 No.-

<P><B>Abstract</B></P> <P>High-performance tungsten molybdenum disilicide (Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB>) heating elements were prepared using a self-propagating high temperature synthesis process. The effect of post annealing on the degradation behavior of the alloy was experimentally investigated. Increasing the attrition milling time up to 20 min during powder preparation resulted in Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters with the highest density, which increased the fracture strength compared to samples with shorter attrition times. Such samples were annealed and evaluated as heating elements using accelerated degradation tests and failure analysis in order to compare their structural characteristics and flexural strength with as-fabricated samples. The annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heater showed a relatively dense structure with few pores and no secondary phases, apart from a SiO<SUB>2</SUB> layer. This favorable structure prevented bubble formation, which can result in fracturing of the heater, as revealed by evaluation at high temperatures with various heating rates. The flexural strength of the annealed specimen was 2.5-times higher than that of the as-fabricated specimen, which was attributed to removal of secondary phases during annealing. Failure time and surface load analyses were used to investigate the fracture mechanism of the Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters in detail at 1790 °C by quantifying bubble formation and the presence of secondary phases.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Self-propagating high temperature synthesis of Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters demonstrated. </LI> <LI> Post-annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters were highly dense, with good flexural strength. </LI> <LI> Bubble formation (the main cause of fracture) suppressed at ultra-high temperature (above 1700 °C). </LI> <LI> Surface load, failure time, and bubble formation used to study fracture mechanisms. </LI> </UL> </P>

SHS 공정으로 제조된 Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si₂ 발열체의 가속수명시험과 고장분석

이동원(Dong-Won Lee),이상헌(Sang-Hun Lee),김용남(Yong-Nam Kim),이희수(Heesoo Lee),이성철(Sung-Chul Lee),구상모(Sang-Mo Koo),오종민(Jong-Min Oh) 한국전기전자학회 2017 전기전자학회논문지 Vol.21 No.3

고온자전합성과 후열처리 공정으로 MoxW1-xSi₂ 발열체를 제조하였다. MoxW1-xSi₂ 발열체의 신뢰성을 검증하기 위해 가속수명시험을 수행하였으며, 수명시간을 Minitab 프로그램으로 추정하였다. 또한, 가속수명시험 후의 MoxW1-xSi₂ 발열체의 고장분석을 전기적과 구조적 특성으로부터 수행하였다. 그 결과, MoxW1-xSi₂ 발열체의 지배적인 고장 유형은 발열체 내부의 크랙 형성과 SiO₂ 보호층의 박리임을 확인하였다. MoxW1-xSi₂ heaters were fabricated by self-propagating high-temperature synthesis (SHS) process and post sintering process. To validate the reliability of the MoxW1-xSi₂ heaters, the accelerated life test (ALT) was conducted, and then lifetime to MoxW1-xSi₂ heaters was estimated by using Minitab programs. Also, the failure analysis of MoxW1-xSi₂ heaters after ALT was performed through electrical and structural properties. As the results, it was confirmed that the dominant failure mode of MoxW1-xSi₂ heaters is the crack formation in heaters and the delamination of protective SiO₂ layers.

Mo 화학기상증착에 있어서 불순물 농도에 미치는 증착조건의 영향

배상석,서성교,홍은식,김승모,조미정,한혜정,이두성,김세훈,민석홍 국립7개대학공동논문집간행위원회 2001 공업기술연구 Vol.1 No.-

The thermal decomposition process of Mo(CO)_6 on chemical vapor deposition was investigated by analyzing the effects of deposition temperature, pressure, and reaction gas on the phase change of deposited films. Mo_2C was deposited at or below 350℃ due to the incompleteness of thermal decomposition of Mo(CO)_6, but Mo films was successfully deposited at 400℃ or higher temperatures. The variation of deposition pressure did not change the dependence of decomposition process on deposition temperature. The activation energy of surface reaction was 5.8 ㎉/mole.

한의진단명과 진단요건의 표준화 연구 III : 3차년도 연구결과 보고

최선미,양기상,최승훈,박경모,박종현,심범상,김성우,노석선,이인선,정진홍,이진용,김달래,임형호,김윤범,박성식,송태원,김종우,이승기,최윤정,신순식 한국한의학연구원 1997 한국한의학연구원논문집 Vol.3 No.1

The diagnostic requirements were suggested and explained regarding the systems of differentiation of symptoms and signs in the third year study of standardization and unification of the terms and conditions used for diagnosis in oriental medicine. The systems were as follows : - analyzing and differentiating of epidemic febrile disease - analyzing and differentiating in accordance with the Sasang constitution medicine based on four-type recognition - differentiation of disease according to pathological changes of Chong and Ren channels - standards for diagnosis of women's disease - standards for diagnosis of children's disease - standards for diagnosis of motor and sensor disturbance (-muscle. born, joint, etc.) - standards for diagnosis of neuropsychiatric disease - standards for diagnosis of five sense organ disease - standards for diagnosis of external disease The indivisual diagnosis pattern was arranged by the diagnostic requirements in the following order : another name, notion of diagnosis pattern, index of differentiation of symptoms and signs, the main point of diagnosis, analysis of diagnosis pattern, discrimination of diagnosis pattern, prognosis, a way of curing a disease, prescription, herbs in common use, disease appearing the diagnosis pattern, documents. The standards for diagnosis of each disease was arranged by the diagnostic requirements in the following order : another name, notion of disease, the main point of diagnosis, analyzing and differentiating of disease, analysis of disease, discrimination of disease, prognosis, a way of curing and prescription of disease, disease in western medicine appearing the disease in oriental medicine, documents.

해남 모이산 천열수 금은광상의 지구화학적 특성

문동혁,고상모,이길재,Moon, Dong-Hyeok,Koh, Sang-Mo,Lee, Gill-Jae 대한자원환경지질학회 2010 자원환경지질 Vol.43 No.5

전남 해남군 모이산 금광상에서 지구화학적 특성에 대한 연구를 수행하기 위하여 모이산 지표 및 갱내, 대산 지표에서 채취한 총 140개 시료에 대한 지구화학분석결과를 상관분석, 요인분석 그리고 군집분석 등 다변수 통계처리 하였다. 상관분석 결과, 금의 함량이 100 ppb 미만인 비광화대와 100 ppb 이상인 광화대에서 동시에 금과 높은 상관관계를 가지는 원소는 Ag, Cu, Bi, Te 등이며, 이는 연구지역에서 수반되는 함금 은 광석광물들(엘렉트럼, 실바나이트, 칼라버라이트 및 스퉤자이트)과 기타광석광물들(황동석, 텔룰로비스무타이트 및 비스무시나이트)의 산출과 일치된 결과로 인지된다. Mo은 비광화대(0.269)에서 보다 광화대(0.615)에서 상대적으로 높은 상관계수를 가지므로 금광화작용에 의해 그 함량이 강하게 지배되고 있는 것으로 해석된다. Mn, Cs, Fe, Se 등은 비광화대에서는 금과 정의 상관관계를 가지지만 광화대에서는 음의 상관관계를 가지므로 금광화작용 시 모암으로부터 용탈되는 원소군으로 해석된다. Sb은 광화대에서 금과 높은 상관성을 보이지만 비광화대에서는 음의 상관관계를 가지므로 금광화작용 시 부화되는 원소로 지시될 수 있다. 요인분석결과, 비광화대에서 금의 함량에 영향을 받는 요인군에 속하는 원소는 Se, Ag, Cs, Te 등이며 이들은 연구지역 내 비광화대에서 금의 존재 여부를 알려줄 수 있는 원소로 해석될 수 있다. 반면 광화대에서는 Mo과 Te 등이 강하게 금광화작용의 여부를 지시해 주며, 금과 함께 수반되는 은광화작용의 여부를 지시해 줄 수 있는 원소는 Sb과 Cu 등으로 해석된다. 군집분석 결과 비광화대에서 Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba 등이 유사한 거동을 보이는 원소군으로 나타나는 반면, 광화대에서는 Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo 등이 유사한 거동을 보여주는 원소군으로 나타난다. 이상과 같은 지구화학분석 자료의 다변수 통계처리를 이용하여 금광화대와 비광화대의 산출광물의 거동 및 지구화학적 특성 차이의 비교가 가능하므로 추후 이러한 방법이 이와 유사한 유형의 광상탐사에 유용한 방법으로 적용될 수 있을 것으로 기대된다. Geochemical characteristics of the Moisan epithermal gold-silver deposit with total 140 samples in Haenam area, Jeollanamdo were studied by using multivariate statistical analysis (correlation analysis, factor analysis and cluster analysis). The correlation analysis reveals that Ag, Cu, Bi, Te are highly correlated with Au in the both non-mineralized and mineralized zone. It is resulted from the presence of Au-Ag bearing minerals (electrum, sylvanite, calaverite and stuezite) and non Au-Ag containing minerals (chalcopyrite, tellurobismuthite and bismuthinite). Mo shows relatively much higher correlation at the mineralized zone (0.615) than non-mineralized zone (0.269) which implies Mo content is strongly affected by Au-mineralization. While Mn, Cs, Fe, Se correlated with Au at the nonmineralized zone, they have negative correlation at the mineralized zone. Therefore, they seem to be eluviated elements from the host rock during gold mineralization. Sb is enriched during the gold mineralization showing high correlation at the mineralized zone and negative correlation at the non-mineralized zone. According to the factor analysis, Se, Ag, Cs, Te are the indicators of gold mineralization presence due to the strong affection of gold content in the non-mineralized zone. In the mineralized zone, on the other hand, Mo, Te and Sb, Cu are the indicators of gold and silver mineralization, respectively. While the cluster analysis reveals that Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba are the similar behavior elements groups in the non-mineralized zone, Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo are the similar behavior elements groups in the mineralized zone. Using multivariate statistical analysis as mentioned above makes it possible to compare the behavior of presented minerals and difference of geochemical characteristics between mineralized and non-mineralized zone. Therefore, it will be expected a useful tool on the similar type of mining exploration.

폐쇄성 수면무호흡 환자의 상기도 형태의 특징과 압력강하에 관한 3차원 전산유체역학해석

모성서,안형택,이정선,정유삼,문윤식,배응권,성상진 대한치과교정학회 2010 대한치과교정학회지 Vol.40 No.2

폐쇄성 수면무호흡(obstructive sleep apnea, OSA)은 수면 중에 반복적으로 상기도의 완전폐쇄나 부분폐쇄가 일어나는 질환으로서 흡기된 공기는 반드시 상기도라는 연조직 관(tube) 구조를 통과해야 하므로 상기도의 폐쇄경향은 관의 형태 및 관을 통과하는 공기의 유체역학적 특성에 따라서도 큰 영향을 받을 수 있다. 본 연구에서는 OSA 환자 3인의 치료 전 상기도 CT 이미지를 이용하여 개별화된 3차원 유한요소모델 A, B, C를 제작하고, 비공 당 170, 200, 230 ml/s의 흡기유량에 대하여 3차원 전산유체역학 해석을 시행하였다. 상기도의 유속, 음압 그리고 압력강하를 측정한 결과 관찰된 3개의 모델에서 모두 단면적이 가장 작은 부위에서 유속이 증가하였고, 음압이 크게 나타났다. 기도의 형태는 구개인두와 구인두 부위에서 좁아지는 형태를 가지며, 최소 단면적 영역과 하인두 단면적의 차이가 클수록 유속과 음압의 변화가 크게 나타났다. 비강 부위의 최고 압력과 최소 단면적 영역의 최저 압력의 차이를 의미하는 압력강하는 상기도 저항을 종합적으로 판단할 수 있는 유용한 지표이며, 유량에 따라 증가하였다. Objective: Obstructive sleep apnea (OSA) is a common disorder which is characterized by a recurrence of entire or partial collapse of the pharyngeal airway during sleep. A given tidal volume must traverse the soft tissue tube structure of the upper airway, so the tendency for airway obstruction is influenced by the geometries of the duct and characteristics of the airflow in respect to fluid dynamics. Methods: Individualized 3D FEA models were reconstructed from pretreatment computerized tomogram images of three patients with obstructive sleep apnea. 3D computational fluid dynamics analysis was used to observe the effect of airway geometry on the flow velocity, negative pressure and pressure drop in the upper airway at an inspiration flow rate of 170, 200, and 230 ml/s per nostril. Results: In all 3 models, large airflow velocity and negative pressure were observed around the section of minimum area (SMA), the region which narrows around the velopharynx and oropharynx. The bigger the Out-A (outlet area)/ SMA-A (SMA area) ratio, the greater was the change in airflow velocity and negative pressure. Conclusions: Pressure drop meaning the difference between highest pressure at nostril and lowest pressure at SMA, is a good indicator for upper airway resistance which increased more as the airflow volume was increased.

대호 간척기 토양의 염농도별 밭작물의 염해 평가

이승헌,류순호,설수일,안열,정영상,이상모 江原大學校 附設 環境硏究所 2001 環境硏究 Vol.18 No.-

This study was carried out to obtain the basic data for selecting the applicable crops in reclaimed land during desalinization period. A pot experiment was conducted with 5 different electrical conductivities of the saturated extracts (ECe 1, 3, 9, 14, and 16 dS·m^(-1)) of soils taken from the Dae-Ho reclaimed tidal lands. Eight crops (Chinese cabbage, radish, tomato, red pepper, buckwheat, soybean, sesame, and green perilla) were grown for 37days. Plant height and number of leaves were surveyed on 2 and 4 weeks after seeding, and on harvest time (5 weeks). After harvest, dry weights of harvested crops were measured and soil chemical properties were analyzed. Emergence rates of crops were comparatively high except sesame. For sesame, there was no emergence at ECe over 3 dS·m^(-1). Growth and dry weight decreased significantly as increasing ECe. The ECe which decreased 50% of dry weight index were 14.2 dS·m^(-1) for radish, 11.4 dS·m^(-1) for Chinese cabbage, 10.2 dS·m^(-1) for tomato for red pepper, 8.9 dS·m^(-1) for buckwheat and green perilla, 8.6 dS·m^(-1) for soybean, and 8.9 dS·m^(-1) for tomato. At higher ECe that start the growth inhibition, increasing 1 dS·m^(-1) in ECe, 7.7, 6.5, 5.9, 5.6, 5.2, and 4.9% of dry weight decreased for buckwheat, green perilla, Chinese cabbage, radish, soybean, and tomato (red pepper), respectively. The critical value of ECe for crop survival except sesame was 15.4~23.1 dS·m^(-1).

IBM-PC/XT를 사용한 다중파고분석기의 스펙트럼 분석

이모성,금명철,김현창 성균관대학교 기초과학연구소 1987 論文集 Vol.38 No.1

We have developed the on-line program to communicate the data between IBM-PC/XT and ORTEC 7010 multichannel analyzer, and to analyze the spectrum of the analyzer. The peaks of the spectrum were fitted by analytical function consisted of the Gaussian function and the exponential decay function. By test of the photo-peaks of Nal(Tl) scintillation detector, the relative standard deviations were about 0.5%.

PLL Motor Control System의 安定度와 動特性 改善에 관한 硏究

李承煥,禹靖仁,安仁模 동아대학교 공과대학 부설 한국자원개발연구소 1983 硏究報告 Vol.7 No.1

Method of stabilizing a PLL controlled DC motor drive using velocity feedback and acceleration feedback are described. By a choice of the time constants in the feedback circuits astable system with good performance characteristics can be obtained. Integral squared error(ISE) criterian is used to find out the constants of the stabilizing circuits for giving an optimum response. Besides, EMF feedback loop added in the system make the system respond rapidly for a sudden variation of load torque. Transient response of the system is calculated for a sudden loading condition and then it is compared with experimental results.