곰솔(Pinus thunbergii )에서 소나무재선충병 예방을 위한 나무주사용 약제선발

이상명(Sang Myeong Lee),김동수(Dong Soo Kim),이상길(Sang Gil Lee1),박남창(Nam Chang Park),이동운(Dong Woon Lee) 한국농약과학회 2009 농약과학회지 Vol.13 No.4

This study was carried out to select effective preventive pesticides against pine wilt disease caused by pinewood nematode (PWN), Bursaphelenchus xylophilus on trunk injection. 1,000 fold aquatic solution of abamectin 1.8% EC and emamectin benzoate 2.15% EC were lower mortality (7.3% and 8.3% respectively) against PWN on 1 day after treatment. However effects of abamectin 1.8% EC, emamectin benzoate 2.15% EC, fosthiazate 30% SL and fenitrothion 30% SL were inhibited the reproduction of PWN over 99.6% in Botrytis cineria media. Effect of trunk injection of abamectin 1.8% EC and emamectin benzoate 2.15% EC at the rate of 10 ㎖ per 10 ㎝ in diameter of breast height (DBH) on mortality of Japanese black pine, Pinus thungergii by inoculated PWN was 0% and 3.3%, respectively at the applied year however when injection of fosthiazate 30% SL were treated with the rate of 5 ㎖ per 10 cm tree DBH, mortality of tree was 63.3%. Abamectin 1.8% EC and emamectin benzoate 2.15% EC was showed high preventive efficacy representing >90% against PWN at the following year. PWN preventing efficacy of trunk injection was lower in naturally occurred area (mortality of pine tree in control was 11.7% at the first year) of PWN than artificially infected site (mortality of pine tree in control was >76.7% at the first year), PWN preventing efficacy of trunk injection of abamectin 1.8% EC and emamectin benzoate 2.15% EC at the rate of 10 ㎖ per 10 ㎝ in DBH was 91.5% and 82.9%, respectively, at the applied year and 89.5% and 82.6% respectively at the following year in PWN naturally occurred site. Control efficacy by trunk injection of abamectin 1.8% EC and emamectin benzoate 2.15% EC was more higher in 10 fold dilution with 10 fold high amount of aquatic solution than no dilution with 10 fold less amount of aquatic solution. The preventive effect of trunk injection of abamectin 1.8% EC and emamectin benzoate 2.15% EC at the rate of 5 ㎖ per 10 ㎝ in DBH was showed 100% at the applied year in PWN inoculated tree.

강제치환 거동특성에 관한 원심모형실험

이종호,박병수,정길수,유남재 강원대학교 산업기술연구소 2003 産業技術硏究 Vol.23 No.A

This thesis is results of centrifuge model experiments to investigate the behavior of replacement method in dredged and reclaimed ground For experimental works. centrifuge model tests were carried out to investigate the behavior of replacement method in soft clay ground. Basic soil property). tests were performed to find mechanical properties of clay soil sampled from the southern coast of Korea which was used for ground material in the centrifuge model tests Reconstituted clay ground of model was prepared by applying preconsolidation pressure in 1g condition with specially built model container. Centrifuge model tests were carried out under the artificially accelerated gravitational level of 50g Replacing material of leads having a certain degree of angularity was used and placed until the settlement of embankment of replacing material was reached to the equilibrium state. Vertical displacement of replacing material was monitored during tests. Depth and shape of replacement. especially the slope of penetrated replacing material and water contents of clay ground were measured after finishing tests Model tests of investigating the stability of embankment after backfilling were also performed to simulate the behavior of the dike treated with replacement and backfilled with sandy material. As a result of centrifuge model test. the behavior of replacement, the mechanism of the replacing material being penetrated into clay ground and depth of replacement were evaluated

분기사각 덕트 내의 유동 특성에 관한 실험적 연구

이덕구,이행남,박길문 朝鮮大學校 機械技術硏究所 2001 機械技術硏究 Vol.4 No.1

The flow characteristics in dividing regions of rectangular duct system are precise, therefore their classification is very important not only in industry but also in hydrodynamics. By now, many studies of flow characteristics in dividing regions have been performed, but flow characteristics by visualizations in dividing regions have not been studied. The present Particle image velocimetry exhibits instant velocity distributions, kinetic energy distributions and vorticity, etc of the total flow fields due to the development of the accurate visualization with optical laser and optical equipment. Also, Particle image velocimetry is accurate with the flows characteristics of the dividing region as continuous analysis is done using input equipment. This study analyzes average velocity vector field, average kinetic energy and x-axis stress distribution of dividing regions with flow characteristics for visualization of Particle image velocimetry measurements in a dividing rectangular duct.

전략적 제휴를 통한 통관업체의 경쟁력 강화 방안에 관한 실증연구

성남길, 이기웅 건국대학교 사회정책연구소 2009 사회과학연구 Vol.23 No.-

...

경사진 사석층의 지지력에 관한 원심모형실험 및 수치해석

이명욱,박병수,정길수,유남재 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.B

This paper is an experimental and numerical research works about the effects of the bearing capacity of sloped rubble mound on the density of rubble mound and the position of footing. Centrifuge model tests were performed to investigate the bearing capacity of rubble mound by changing the density of rubble mound and the location of loading in forms of strip loading to simulate the caisson. Materials of rubble mound used in the model tests were crushed rocks having similar value of uniformity coefficient to the value in field. Two different relative densities of 80% and 90% were prepared during tests. The dimens ions of centrifuge model were trapezoidal shape of model mound having the bottom width of mound, 30cm and height of mound, 10cm. Gravity level applied during the centrifuge test was 50G. Surcharge loading in the forms of strip loading was applied on the top of the sloped model mound. Tests were carried out by changing the position of loadi ng. The rigid model footing was located in the center of top of the model rubble mound and the edge of model footing was at the crest of mound. Test results were analyzed by using the limit equilibrium methods proposed by Meyer hof(1957) and Bowles(1982) and the numerical approach with FLAC being available commercially software. For the numerical estimations with FLAC, the rubble mound was simulated with the constitutive relationship of Mohr-Coulomb elasto-plastic model.

바나듐 산화막을 활용한 습도센서의 제조에 관한 연구

이승철,최복길,김남철 公州大學校 工學硏究院 生産技術硏究所 2004 論文集 Vol.12 No.-

Vanadium oxides have been widely used in a variety of technological applications such electrochromic devices as infrared detectors and are expected as a material suitable for gas sensing applications. Thin films of Vanadium oxide (VOx) have been deposited by r.f magnetron sputtering under different oxygen partial pressure ratios(0%, 10%) and substrate temperatures(27℃, 400℃). Humidity-sensitive properties of resistive sensors having interdigitated electrode structure are characterized. Our sensors show good response to humidity over 20%RH to 80%RH Vanadium oxide films deposited with 0%O2 partial pressure at 400℃ exhibit greater sensitivity to humidity change than others.

90˚ 분기덕트 내의 유속 및 압력분포에 관한 연구

이행남,박길문,이종구 朝鮮大學校 機械技術硏究所 2001 機械技術硏究 Vol.4 No.2

The velocity and pressure distributions in a bifurcated duct are investigated experiment. Physical properties such as mean velocity vectors, mean vorticity and total pressure distributions are obtained for three different Reynolds numbers(578, 620, 688) using PIV measurements and CFD analysis. Also, two different dividing duct(90°) was selected for experimental study. The results of this study would be useful to the engineer in designing the flow systems for heating, ventilation, air conditioning and wastewater purification plants.

총담관 결찰후 집토끼 소엽사이담관의 미세구조적 연구

이상은,박경호,양남길,안의태,고정식 순천향의학연구소 1995 Journal of Soonchunhyang Medical Science Vol.1 No.2

담소관은 담즙의 성분중 수분과 무기전해질의 분비 및 흡수기능을 가지고 있는데, 총담관을 결찰하여 인위적으로 담즙울체를 일으킨 후 담소관상피세포의 미세구조적변화를 알아보기 위하여 본 실험을 시행하였다. 집토끼의 총담관을 결찰하고 1일, 3일, 5일, 7일, 및 14일이 경과된 후 간조직을 떼어 전자현미경관찰을 위한 통상적인 방법에 따라 고정, 탈수, 포매의 과정을 거친 다음 전자현미경관찰용 절편을 만들어 JEM 100CX Ⅱ 투과전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 정상 담소관상피세포는 입방형이며, 내강이 커질수록 원주상으로 변하며, 가끔 전자밀도가 높은 세포가 나타났다. 2. 담소관담상피세포의 자유면은 미세융모가 돌출되어 있으며, 드물게 섬모도 관찰되었다. 세포의 위쪽 측면은 폐쇄띠, 부착띠, 부착반을 가진 연접을 이루었으며, 아래 쪽은 미세주름이 나타났고, 기저면은 기저막으로 둘러 싸여 있었다. 3. 총담관결찰 후 담소관은 그 내강이 확장되면서 상피세포의 미세융모의 수는 줄었으며 팽대되었고, 미세사의 증식이 현저하였다. 4. 총담관결찰 후 담소관상피세포 사이의 부착띠가 더욱 발달되는 경향을 보였다. 5. 총담관결찰 후 담소관상피의 기저막은 부분적인 파괴가 관찰되었다. 이상의 결과에서 미세융모의 감소, 내강의 확장 및 기저막의 부분적인 파괴등은 담즙울체로 인하여 담관내의 압력이 증가하므로 나타나는 담소관상피세포의 형태적 변화라 생각된다. The bile ductule is known to have the function of and the secretion and the reabsorption of the bile juice, especially water and inorganic electrolytes. This experiments was performed to study the ultra sturctural changes of the bile ductule of the rabbit liver after common bile duct ligation. Common bilt duct ligation was performed under ether anesthesia. The rabbits were sacrificed on the 1st, 2nd, 3rd, 5th, 7th and 14th day after the operation. Small blocs of livers were fixed 2.5% glutaraldehyde-1.5% paraformaldehyde solution, followed by 1% osmium tetroxide, embedded in araldite mixture, cut with LKB-V ultratome, stained with uranyl acetate- lead citrate, and observed with JEM 100CX II electron microscope. The results were as follows: 1. The cytoplasm of normal bile ductular epithelial cell shows lighter density as compared with that of the of the hepatocyte. Occasional dark cells can be seen between the light ductular cells. 2. On the apical free surface of the normal ductular cells, numerous microvilli project into the lumen, and occasional cilia have been observed. The apical pole of lateral surface exhibits junctional complex, including tight junction, intermediate junction and desmosmes, whereas basal pole have a complex interdigitations. Ductular cell rests on a basal lamina. 3. After the common bile duct ligation, bile ductule showed enlargement of lumen, swelling and reduction of microvilli and proliferation of microfilaments. 4. After the common bile duct ligation, bile ductule showed well developed junctional complex and focally duplicated and thickened basal lamina. From the above results, it was concluded that in the acute cholestasis induced by common bile duct ligation, bile ductular cell shows morphological changes, probably to keep the ductular wall from the increasing intraductular pressure.

자동차용 시로코팬의 유동특성에 관한 연구

이행남,박길문,이덕구,정한별,김건일,설재림 朝鮮大學校 機械技術硏究所 2005 機械技術硏究 Vol.8 No.1

The sirocco fan is used to get low noise, and it has been applied to a lot of industry field like the heat engine, the fluid instrument power plant, the food industry, environment industry etc... because there are not problems even it is mixed with a any kind of liquid, gas, and solid. The flow characteristics in sirocco fan are investigated by PIV. The experiment using PIV measurement for Test section's flow characteristics acquired velocity distribution, Condition : when sirocco fan in automobile air controller maximum 1450RPM, and a revolution is a variation (l)950RPM, (2)l100RPM, (3) 1250RPM. The agreement a experiment shows the validity of this study and the results of this study would be useful to the engineers who design for the flow systems

원심모형시험에 의한 복개터널 복공의 토압특성에 관한 연구

이명욱,박병수,정길수,유남재 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.B

This thesis is results of experimental works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand. Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Compared results model tests estimation with respect to displacements of the lining.