http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
KOMPSAT-2 지상 전송관리 소프트웨어 및 전송 제어절차
채동석(Dong-Seok Chae),이종인(Jong-In Lee) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.2Ⅲ
저궤도 위성은 고도가 낮아 하루에도 지구주위를 여러 번 회전해야 하고 주로 극궤도로 운영되므로 지상국과 접촉할 수 있는 시간에 상당한 제약을 가진다. 따라서 저궤도 위성의 경우 대부분의 시간을 지상의 모니터링이나 제어 없이 스스로 임무수행에 필요한 기능을 유지하면서 위성에서 생성되는 각종 데이터를 저장해 두었다가, 다음 번 지상과의 접촉에서 위성의 실시간 상태정보 및 저장된 데이터들을 지상으로 송신하고 수행해 야 할 임무를 지상명령으로 수신하는 과정을 통해서 운영된다. 본 논문은 국내 대표적인 저궤도 위성인 다목적실용위성 2호의 비행소프트웨어에서 위성의 실시간 상태정보 및 대용량 메모리에 저장된 데이터를 지상으로 전송하기 위한 전송제어 소프트웨어 및 전송 제어절차에 대해서 서술하였다.
채동석 ( Dong-seok Chae ),양승은 ( Seung-eun Yang ),이재승 ( Jae-seung Lee ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.1
저궤도 위성은 위성과 지상과의 통신시간이 제한되어 있으므로 제한된 시간에 위성의 대용량메모리 (Mass Memory)에 저장된 데이터를 전송받아야 하는데, 이를 위해 저장되는 데이터 량을 정확히 예측할 수 있어야 하고, 저장된 데이터 량에 따라 지상으로 전송하는데 소요되는 시간을 예측할 수 있어야 한다. 본 논문은 위성에 저장되고 있는 Telemetry 종류에 따라 대용량메모리에 저장되는 데이터 량을 예측하고, 저장된 데이터 량에 따라 지상으로 전송하는데 소요되는 시간을 계산하기 위해 개발된 플레이백 시간 예측 프로그램에 대해 서술한 것이다.
대수층 수리지질특성에 따른 인공함양시험 적용 방법에 관한 연구
채동석 ( Dong-seok Chae ),최진오 ( Jin-o Choi ),정현철 ( Hyeon-cheol Jeong ),김창용 ( Chang-yong Kim ) 대한지질공학회 2021 지질공학 Vol.31 No.4
본 연구에서는 지하공간 개발로 인해 발생하는 지하수위저하, 지반함몰 등의 문제를 해결하는 방법 중 하나인 인공함양기술에 있어 지하수 함양에 결정적인 역할을 하는 지표매질 특성인 수리전도도(hydraulic conductivity)에 관한 적용성에 대한 연구를 수행하였다. 경기도 이천에 위치한 인공함양시설의 설계조건을 동일하게 하여 양수시험과 주입시험을 수행하였다. 양수시험을 통해서는 지하수위를 회복하는데 있어 결정적인 역할을 하는 대수층의 수리상수값을 도출하였으며, 현장 대수층을 단순화 시킨 모델을 구축하여 양수시험 조건과 동일하게 적용한 부정류 해석을 수행하여 실측값과 모델값의 상관성을 검토한 결과 R<sup>2</sup> = 0.78로 분석되었다. 동일한 조건으로 주입시험을 수행하였으며, 주입되는 지층은 실트질모래와 점토질모래로 구성된 퇴적층에서 시험을 진행하였다. 주입시험을 통해 측정된 결과를 통해 시간-수위 자료로부터 대수층의 매개변수를 결정하는 대표적 우물해석해인 Thiem의 공식을 활용하여 경험식을 유도하였으며, 유도된 경험식과 실측값의 상관분석을 수행한 결과 R<sup>2</sup> = 0.99의 높은 상관성을 가지는 경험식을 유도하였다. 본 연구는 주입시험이 수행되기 어려운 지역에서 양수시험을 통해 결정된 대수층의 수리전도도를 활용할 경우, 특정 조건에서 신뢰도 높은 결과를 예측하는데 적절히 활용될 것으로 판단된다. Artificial recharge technology is a method for solving problems such as groundwater level drop and ground subsidence caused by groundwater withdrawal. This study investigated the applicability of using the hydraulic conductivity of an aquifer to predict injection test results for aquifer restoration. Pumping and injection tests were performed under the same conditions as those for the artificial injection facility located in Icheon, Gyeonggi-do. The hydraulic conductivity of the aquifer, which plays a decisive role in restoring the groundwater level, was derived from the pumping test. A numerical model of a simplified on-site aquifer was constructed, and a transient analysis was applied with the same conditions as the pumping test. The correlation between the measured and the resulting model values is strong (R<sup>2</sup> = 0.78). The injection test was performed in a sedimentary layer composed of silt sand and clay sand. From the results of the injection test, an empirical formula was derived using Theim’s formula, which is a common well analysis solution to determine the parameters of the aquifer from time-level data. The model values from the empirical formula have a high degree of correlation (R<sup>2</sup> = 0.99) with measured values. Under specific conditions, for areas where it is difficult to conduct an injection test, the formula from this study, which relies on the hydraulic conductivity of the aquifer determined through the pumping test, may be used to predict reliable injection rates for groundwater restoration.
저궤도위성 원격측정 데이터 처리를 위한 대용량 메모리 운용
채동석(Dong-Seok Chae),양승은(Seung-Eun Yang),천이진(Yee-Jin Cheon) 한국항공우주연구원 2012 항공우주기술 Vol.11 No.2
저궤도 위성은 지상과 교신할 수 있는 시간이 매우 제한되어 있으므로 위성에서 생성되는 모든 원격측정 데이터는 대용량 메모리에 저장되었다가 지상교신 시 실시간 데이터와 함께 지상으로 전송된다. 대용량 메모리는 최초 시스템 초기화 과정에서 초기화가 시작되어 각 블록의 상태정보가 생성되고 원격측정데이터를 저장할 수 있는 준비를 한다. 운영중에 계속적으로 대용량 메모리에 원격측정데이터를 저장하고, 저장된 데이터를 지상으로 전송한다. 그리고 우주환경에서 발생할 수 있는 메모리 오류를 제거하기 위하여 주기적으로 메모리 스크러빙을 수행한다. 본 논문은 저궤도위성 원격측정 데이터 처리를 위한 대용량 메모리 운용방식에 대한 것으로 대용량 메모리 구조, 메모리 초기화 및 메모리 스크러빙 방식, 대용량 메모리를 통한 원격측정데이터 저장 및 전송 방식, 주/부 대용량 메모리운용 방식에 대해서 기술한다. Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.