http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Model for Characteristics in the $AL_xGa_{1-x} As Layer$ of MOSFET's
박광민,오윤경,김홍배,곽계달,Park, Kwang Mean,Oh, Yun Kyung,Kim, Hong Bae,Kwack, Kae Dal The Institute of Electronics and Information Engin 1987 전자공학회논문지 Vol.24 No.3
In this paper, a model for characteristics in the AlxGa1-xAs layer of MODFET's is presented. The characteristics of conduction band in the AlxGa1-xAs layer is analyzed with the Fermi-Dirac statistics. And using the conduction band energy which is calculated with the numerical calculation method (false-Positon method), the variations of the electric-field distribution, the ionized donor concentration, and the two-dimensional electron gas density with gate voltage are calculated, respectively. The channel formation process for the parasitic MESFET operation in the MOD structure is also analyzed, and the characteristics in the AlxGa1-xAs layer is analytically modeled. The throretical results describe well the general characteristics in the MOD structure.
나노실버 투명전도소재 보호필름의 개발 및 공정 최적화와 실험 계획법을 이용한 검증
박광민,이지훈,Park, Kwang-Min,Lee, Ji-Hoon 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.12
We have studied commercialization and process optimization of protective film on transparent conductive coated substrate, nano silver on flexible PET (poly ethylene terephthalate), by means of roll-to-roll micro-gravure coater. Nanosilver on flexible PET substrate is potential materials to replace ITO (indium tin oxide). Protective film is most important to maintain unique silver pattern on top of transparent PET. PSA pressure sensitive adhesives) was developed solely for nano silver on PET and protective film was successfully laminated. We have optimized all process conditions such as coating thickness, line speed and aging time & temperature via experimental design. Transparent conductive film and its protective film developed in this research are commercially available at this moment.
AUTOSAR 임베디드 소프트웨어의 모델기반 개발 및 테스트 방법 - 사례연구 : 운전자 위치제어 시스템
박광민,금대현,이성훈,Park, Gwangmin,Kum, Daehyun,Lee, Seonghun 대한임베디드공학회 2009 대한임베디드공학회논문지 Vol.4 No.4
Automotive systems have tended to be equipped with many electronic contents to satisfy safety, comport, convenience, and entertainment services over the past years. As a result, the amount of vehicle embedded software in electrical/electronic(E/E) systems is steadily increasing to manage these requirements. This leads to the traditional, document-based software development in the vehicle embedded systems being increasingly displaced by a model-based development in order to reduce software development time and cost. Due to the application of model-based development, a great evolution is being realized in the aspect of efficiency, but the development is being made without sufficient testing. So, erroneous automotive embedded software may cause serious problems such as car accidents which relate to human safety. Therefore, efficient methods for model-based test and validation are needed to improve software reliability in the stage of embedded software development. This paper presents the model-based development and test method for AUTOSAR embedded software to improve its reliability and safety, and it is demonstrated based on the case study.
Short-Channel EIGFET의 Threshold 전압 모델에 관한 연구
박광민,김홍배,곽계달,Park, Gwang-Min,Kim, Hong-Bae,Gwak, Gye-Dal 대한전자공학회 1985 전자공학회지 Vol.22 No.4
본 논문에서는, drain 전압과 substrate bias에 종속적인 관계를 갖는 short-channel enhancement-mode IGFET의 threshold전압에 대한 보다 개선된 모델을 제시한다. 특히, 최근에 발표된 몇몇 모델들에 비해. short-channel effect에 의한 correction factor를 정확히 해석함으로써 오차를 충분히 줄일 수 있었으며, 본 모델을 이용하여 계산한 이론값은 약 1μm 정도의 채널 길이를 갖는 device에 대해서도 실험값과 잘 일치한다. In this paper, a more improved threshold voltage model dependent on drain voltage and substrate bias for short - channel enhancement - mode IGFET is presented. Especially, compared with the several recently published models, the error is sufficiently reduced with the precise analysis on the correction factor for short-channel effect and the calculated values using this model are also agreed well with the experimental data about 1$\mu$m - channel length device.
박광민 ( Gwangmin Park ),박상호 ( Sangho Park ),박리원 ( Leewon Park ),장항배 ( Hangbae Chang ) 한국정보처리학회 2017 한국정보처리학회 학술대회논문집 Vol.24 No.1
최근 시간과 장소에 얽매이지 않고, 언제 어디서나 편리하게 근무함으로써 업무효율성을 향상시킬 수 있는 업무환경 개념인 스마트워크(Smartwork)가 각광을 받고 있다. 그러나 스마트워크 환경에서는 모든 업무가 정보통신망과 정보시스템을 통해 처리되기 때문에 정보유출 위협이 존재한다. 또한, 디지털 포렌식 분야에서 조사 및 수사대상이 점점 다양화되고 있다. 내부정보 유출과 같은 보안사고 발생 후, 디지털 증거는 대부분 제한적으로 수집될 수밖에 없으며, 전문업체 의뢰 시 높은 의뢰비용과 장기간의 분석 시간이 소요된다. 기존의 내부정보 유출 방지 시스템에만 의존할 것이 아니라, 유출 행위 탐지에 중점을 둔 선제적 감사 활동을 수행하기 위한 디지털 포렌식 준비도가 필요한 상황이다. 따라서, 본 논문에서는 다양한 디지털 포렌식 준비도 관련 모델들에 대한 분석을 기반으로 미래 스마트워크 환경에서 보안사고에 대응하기 위한 디지털 포렌식 준비도 모형을 연구하였다.
상대 밀도에 따른 금속 적층 제조 격자 구조체의 기계적 특성
박광민(Kwang-Min Park),김정길(Jung-Gil Kim),노영숙(Young-Sook Roh) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.6
격자 구조체는 강도 및 강성, 초경량 및 에너지 흡수 능력 등의 우수성을 가지고 있어서 전방위 산업에서 주목을 받고 있으나, 다양한 장점에도 불구하고 복잡한 형상에 따른 제조 공정의 어려움으로, 현재까지 광범위한 상용화 및 사용은 제한되고 있다. 한편 적층 제조는 전통적인 제조 방법으로는 불가능한 복잡한 기하학적 형상 제조가 가능한 기술로써, 격자 구조체 제조를 위한 최적 기술로 주목을 받고 있다. 본 연구에서는 3차원 좌표 방법으로 단위 셀을 형성하고, 단위셀의 바운더리 박스 크기 및 스트럿 반경에 따른 상대 밀도의 관계식을 도출하였다. 본 연구에서는 Simple Cubic(SC), Body-Centered Cubic(BCC) 및 Face-Centered Cubic(FCC)을 모델링 소프트웨어를 사용하여 상대 밀도 맞춤형 구조체를 설계하였다. 본 연구에서 제안한 상대 밀도 산출식 정확도는 SC, BCC 및 FCC에서 98.3 %, 98.6 % 및 96.2%의 신뢰성을 확보하였다. 격자 구조체를 대상으로 시뮬레이션 수행 결과, 동일한 셀 배열 조건에서는 상대 밀도가 커짐에 따라 항복 하중이 커지고, 동일 배열 조건에서는 SC, BCC, FCC 순으로 압축 항복 하중이 작아지는 결과가 나타났다. 최종적으로 20 ㎜ × 20 ㎜ × 20 ㎜ 크기의 구조체는 SC 단위 셀을 3×3×3 배열로 구성하는 것이 압축 하중에 대한 구조적 최적화가 가능한 것으로 나타났다. The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 ㎜ × 20 ㎜ × 20 ㎜ structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.
건설자재 미세먼지 제거율 평가를 위한 선형 회귀 분석법 제안
박광민 ( Kwang-min Park ),민경성 ( Kyung-sung Min ),정상화 ( Sang-hwa Jung ),노영숙 ( Yonug-sook Roh ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.5
미세먼지를 제거하기 위하여 미세먼지 제거 기능성 건설자재가 개발되고 있다. 그러나 미세먼지 제거율 평가 방법 및 기반 시설은 국내에 전무한 실정이다. 따라서 본 연구에서는 입자상 미세먼지 제거 성능을 평가하기 위해 미세먼지 제거율 시험 챔버를 구축하고 입자상 미세먼지 제거율 평가 방법을 제시하는 것을 목적으로 하였다. 결과적으로 건설자재는 미세먼지가 발생하는 환경에서 유효성을 가지기 때문에, 시험 입자 주입 단계 구간를 비교 대상으로 제안하였다. 미세먼지 주입 단계에서 측정한 모든 질량농도값에서 선형 회귀 분석으로 얻어진 기울기값을 상대 비교함으로써 미세먼지 제거율 평가를 제안하였다. 본 방법은 모든 측정값을 대상으로 하고 측정값 변동성에 대한 평가를 결정계수(R<sup>2</sup>)로 평가할 수 있어서 미세먼지 제거율 결과값의 신뢰성을 확보할 수 있다. In order to remove particulate matter, functional construction materials are developed. However, there is no evaluation method and infrastructure for particulate matter removal rate. Therefore, the purpose of this study was to build a particulate matter removal rate test chamber and to present a method for particulate matter removal rate. As a result, since construction materials have effectiveness in an environment where particulate matter is generated, the particulate matter injection step was proposed as a comparison target. The evaluation of the particulate removal rate was proposed by relative comparison of the slope values obtained by linear regression analysis for all concentration values measured in the particulate matter injection step. In linear regression method, all measured values can be evaluated, and the variability can be evaluated with the coefficient of determination (R-square), so that the reliability of the particulate matter removal rate can be secured.