http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
임성우,장인화,정우현,Im, Sung Woo,Chang, In Hwa,Chung, Woo Hyun 한국강구조학회 2006 韓國鋼構造學會 論文集 Vol.18 No.5
건출물이 고층화되고 장스팬화될 수록 고강도이면서 신뢰성이 우수한 강재의 사용요구가 증대된다. 이러한 이유로 개발된 강재가 SM570TMC 강재이다. 그러나 아직까지는 SM570TMC 강재는 우수한 기계적 성질에도 불구하고, 동급의 타 강재보다 우수하다고 하는 용접성이 검증되지 않은 상태이다. 본 연구에서는 현장 작업조건으로 국산 용접재료 2종류와 일본산 용접재료 1종류에 대해서 SA 및 FCA 용접하여 용접성을 평가하였다. With building structures becoming higher and longer-spanned, the need for high-strength and reliable steel is increasing. For this reason, the SM570TMC steel plate was developed. Despite its excellent mechanical properties, however, its welding properties, which are well-known to be superior to those of other equivalent steel plates, have not been verified yet. In this study, welding specimens fabricated via SA and FCA welding, with two domestic welding materials and one Japanese welding material in site welding conditions, were evaluated.
임성우 한국유럽행정학회 2009 한국유럽행정학회보 Vol.6 No.2
순직.공상 경찰의 근본적인 문제 해결을 위해서는 경찰관 내부의 노력부터 시작되어야 할 것이다. 경찰청 내부에서 피해를 예방하기 위한 교육 프로그램 등을 개발하고 실시하여 각종 상황에 맞는 업무 매뉴얼 등을 작성하여야 할 것이다. 또한 비현실적으로 과다한 업무량과 경찰 공무원 직업 특성상 발생하는 스트레스 해소를 위해 적극적으로 노력해야 할 것이다. 회복할 수 없는 치명적인 사고는 금전적으로 절대 배상이 안 된다는 것을 명심하고 사전에 피해를 방지하려는 노력을 최우선으로 두어야 할 것이다. 만약에 발생한 사고에 대해서는 경찰관과 시민들이 순직.공상 경찰관에 대하여 영웅시 할 수 있는 사회적 분위기를 조성하여 관련 법제도 정비 및 민간기관의 협조가 원활히 이루어 질 수 있도록 해야 할 것이다. 미국과 일본의 예에서 봤듯이 순직.공상 공무원 및 그 가족에 대한 합리적이고 현실적인 보상 방안은 경찰 및 그 가족들에게 자부심을 길러 줄 것이며 그에 상응하여 나라에 대한 충성심과 시민들을 향한 치안 서비스의 향상은 자명한 일이다. 경찰은 특수하고 위험한 업무를 수행하는 우리와 같은 시민이다. 그런 관점에서 경찰 보상 문제에 대해 접근한다면, 특수하고 위험한 업무를 담당하는 시민에게 그에 맞는 대우를 해 주어야 한다는 것은 당연한 이치이고 보다 합리적이고 실질적인 보상방안이 나올 것이라 생각한다.
임성우,이찬규,홍종휘 ( Sung Woo Im,Chan Gyoo Lee,Jong Hwi Hong ) 한국주조공학회 1983 한국주조공학회지 Vol.3 No.4
The effect of chromium, aluminium and copper contents on the structures and mechanical properties of cast iron was investigated. 1) Mechanical properties were improved with the formation of ledeburite by chromium addition. The primary carbides dispersed in martensitic matrix contributed to high strength and wear resistance. 2) Small addition of aluminium decreased hardness of the cast iron. 3) The impact values were decreased by the formation of the double carbides but improved by the heat treatment. 4) Small addition of copper up to a certain level increased the hardness. Also impact values were considerably increased.
임성우,김동진,문윤상,이지우 한국품질경영학회 2019 한국품질경영학회 학술대회 Vol.2019 No.-
수업시간에 배운 데이터베이스 내용을 가지고 기업을 선정하여 저희 조에서 생각한 문제점을 판단하여 해결방안을 찾아내는 기업분석을 하려고 합니다. 기업은 주변에서 볼 수 있는 식당으로 선정하였고 저희가 하고자 하는 것은 직원 근태관리 및 일정관리입니다. 이번 품질경진대회에서 보여드릴 내용은 대상 업체의 소개, 현 상황 업무 분석, 프로세스 분석, 문제점, 사용자별 요구사항 및 해결방안, 결론으로 데이터베이스의 개발의 기획단계임으로 데이터베이스의 정규화 과정을 거처서 마무리할 예정입니다.
임성우,고상기 대한건축학회 2000 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.20 No.2
In Japan, 600㎫ grade SM570 has been used for the building structure from 1970. However, in Korea, 500㎫ grade SM490 is used until now. To use 600㎫ grade steel in building, it should be compared with the conventional 500㎫ grade steel through economic assessment, satisfied with the structural design code and proposed the new application field. Economic assessment shows that steel usage is cut down by 13.2% and overall framing cost is also cut down by 5.6% due to the saving in fabrication, material handling, erection in spite of the material cost increase. Compared with the existing structural design code, the properties of SM570 is sufficient for material, tension and compression member. When especially used as a thicker member than 40㎜, the excellent yield strength to tensile strength ratio makes a possible application to the seismic region. Lastly, a brace structure based on flexible-stiff mixed structure as new application field of 600 ㎫ grade steel is proposed.
임성우,고상기,장인화,Im, Sung-Woo,Ko, Sang-Ki,Chang, In-Hwa 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.3
Column tests subjected to compressive loading were carried out for the estimation of compression buckling strength of steel plate SM570 in beam-column member under high axial load. It was found that the maximum strength of column member was determined by local buckling when satisfied with a limit of width-to-thickness ratio in current steel structure design specifications, but decreased suddenly by local buckling before the maximum strength in case of not satisfying with that ratio. Also, the compression buckling strength of SM570 plate was higher than the design specification value of 4$4.1tonf/cm^2$. 본 연구에서는 높은 축력을 받는 기둥재에 사용 가능성이 큰 고장력 용접구조용 압연강재인 SM570의 압축좌굴내력을 평가하기 위해서 중심압축실험을 실시하였다. 단 주압축 실험결과 강구조 계산규준이 정하고 있는 판폭두께비의 제한치를 만족시키는 기둥부재의 최대내력은 국부좌굴에 의해 결정되며, 판폭두께비의 제한치를 만족시키지는 못하는 경우에는 최대내력이 도달하기 전에 국부좌굴에 의해서 급격히 저하하였다. 또한 압축 좌굴내력이 SM570 강재의 설계기준값인 $4.1tonf/cm^2$보다 높게 나타났다.
임성우,고상기,하동우,오상훈,장인화,Im, Sung Woo,Ko, Sang Ki,Ha, Dong Woo,Oh, Sang Hoon,Chang, In Hwa 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.6
In this study, the chemical compositions and mechanical properties of high tensile strength steel plates in accordance with their thickness are quantitatively estimated, that are steel plates SM570 to be purposed to use in building structure. Test results of steel plates SM570 are compared with those of steel plates SS400 and steel plates SM490 mostly using building structure. It is found that chemical compositions, carbon equivalent, parameter of welding crack susceptibility, yield strength, tensile strength, elongation, and impact strength have satisfied the prescribed value in KS code for all case of thickness. 본 연구에서는 고장력 용접구조용 압연강재인 SM570을 건축구조용으로 사용하기 위해서 판두께에 따른 화학성분과 기계적 성질의 분포특성을 정량적으로 평가하였다. 또한 건축구조용 강재로 주로 사용되는 일반구조용 압연강재인 SS400과 용접구조용 압연강재인 SM490을 비교재로 사용해서 SM570 강재와 비교 평가하였다. 본 연구결과 모든 두께에서 SM570 강재의 화학성분, 탄소당량, 용접 갈라짐 감수성 조성과 항복강도, 인장강도, 연신률 및 충격강도는 한국산업규격을 만족하였다.