http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기구축 공간데이터를 활용한 3차원 건물모델의 위치정합 기법 연구 - ICP 알고리즘 구현 중심으로 -
이재희,이인수,강지훈,Lee, Jaehee,Lee, Insu,Kang, Jihun 한국국토정보공사 공간정보연구원 2021 지적과 국토정보 Vol.51 No.1
최근 스마트시티, 디지털 트윈, 자율주행, 스마트 건설 등의 분야가 발전하면서 각 분야에서 생산되는 다양한 데이터를 서로 연결하기 위한 매개체로서 공간정보의 가치가 매우 중요해지고 있다. 특히 데이터의 최신성을 위해 공간정보의 신속한 구축과 갱신이 필요하다. 본 연구에서는 정밀한 위치정확도가 이미 검증된 기구축 공간데이터를 이용하여 지상기준점 없이 제작된 영상기반 3차원 건물모델의 위치를 정합시킬 수 있는 소프트웨어 프로토타입을 개발하였다. 이 소프트웨어를 실험대상지역에 적용한 결과, 지상기준점 없이 제작된 3차원 건물모델과 기구축 공간데이터가 높은 위치 정합률을 보여 최신의 3차원 공간데이터를 필요로 하는 분야에 적용될 수 있음을 확인하였다. Spatial data is becoming very important as a medium that connects various data produced in smart cities, digital twins, autonomous driving, smart construction, and other applications. In addition, the rapid construction and update of spatial information is becoming a hot topic to satisfy the diverse needs of consumers in this field. This study developed a software prototype that can match the position of an image-based 3D building model produced without Ground Control Points using existing spatial data. As a result of applying this software to the test area, the 3D building model produced based on the image and the existing spatial data show a high positional matching rate, so that it can be widely used in applications requiring the latest 3D spatial data.
블록체인기술을 활용한 토목공사 생애주기 BIM 모델의 신뢰성 확보 방안
이재희,문현석,강인석,Lee, Jaehee,Moon, Hyounseok,Kang, Leenseok 한국건설관리학회 2021 한국건설관리학회 논문집 Vol.22 No.1
건설공사의 설계 및 시공단계에 BIM 모델의 활용성이 증대되면서 유지관리단계의 BIM 활용성 증대도 예상되고 있다. 유지관리단계에는 이미 작업이 완료된 설계 및 시공단계에 생성된 BIM 객체들을 사용하게 되므로, 활용하는 BIM 객체가 설계단계에 제작된 인증 모델인지 신뢰도 검증이 필요하다. 특히 철도시설물과 같이 토목, 건축, 전기, 신호, 궤도 등 다양한 공정과 기관으로 구성된 BIM 활용 프로젝트에서는 BIM 모델의 신뢰도가 더욱 중요도를 갖게 된다. 본 연구에서는 유지관리단계에서 사용하는 BIM 모델의 신뢰도를 확보하기 위한 방안으로 블록체인기술을 사용하는 방법을 제안하고 있으며, 이를 위해 BIM에 블록체인기술을 적용하기 위한 블록의 구조와 상세 프로세스를 구성하였다. 또한 이러한 과정을 실제 시설물의 BIM 모델에 적용하여 블록을 생성함으로써 블록체인 기술이 BIM 모델의 신뢰도 확보를 위한 도구로 사용될 수 있음을 확인하였다. As the utilization of the BIM model increases in the design and construction stages of a construction project, the utilization of BIM in the maintenance stage can also increase. In the maintenance stage, BIM objects created in the design and construction stages that have already been completed are used. Therefore, it is necessary to verify the reliability of whether the used BIM object is a certified model created in the design stage. In particular, the reliability of the BIM model becomes more important in a project such as railway facilities composed of various construction activities with civil engineering, architecture, electricity, signal, and track work. This study proposes a methodology of using blockchain technology as a way to secure the reliability of the BIM model used in the maintenance phase, and constructs the block structure and detailed process for applying the blockchain technology to BIM. In addition, by applying this process to the BIM model of an actual facility to generate a block, it was confirmed that the blockchain technology can be used as a tool to secure the reliability of the BIM model.
이재희,임진석,박진백,Lee, Jaehee,Lim, Jin Seok,Park, Jinbaek 한국안전학회 2021 한국안전학회지 Vol.36 No.1
This study aims to analyze an influence of industrial accident on industrial productivity. We analyzed relationship among industrial accident, labor force, and industrial productivity using vector error correction model (VECM). The data used in the analysis were the number of industrial accidents, the number of workers, and index of all industry production from January 2008 to June 2017 in Korea. Finally, the industrial accidents have played a role in reducing labor force and industrial productivity.
이재희(Jaehee Lee),윤혁준(Hyeok-Jun Yoon),오창진(Chang-Jin Oh),노유림(Yu-Rim Noh),주성관(Sung-Kwan Joo),유상민(Sangmin Ryu),위영민(Young-Min Wi) 대한전기학회 2018 전기학회논문지 Vol.67 No.3
In this study, the theoretical methodology is presented for estimating cost function based on operating modes for Combined Cycle Power Plant. The proposed method has estimated cost functions using the relationship between the gas turbine heat input and the output ratio of the steam turbine. In order to verify the proposed method, a regression analysis was performed using the single cost function estimated by the existing performance test method and the cost function for each operating mode estimated by the proposed method. The results of case studies using the 2016 generator input and output data are presented to show the effectiveness of the proposed method.
이재희 ( Lee Jaehee ),김두영 ( Kim Dooyoung ),송세헌 ( Song Seheon ),이상일 ( Lee Sangil ),박재현 ( Park Jaehyun ) 한국정보처리학회 2017 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.6 No.6
IoT 기술 발전으로 사물 제어와 센서 정보 영역이 확대되고 서비스 또한 다양해지면서 에너지 소비가 높은 빌딩에서의 에너지 절감 노력이 점차 증가하고 있으며 생활 안전, 보안, 편의에 이르기까지 서비스가 확대되고 있다. 하지만 기존 스마트 빌딩 서비스들은 IoT 다바이스에 종속적이고, 사용 중인 서비스 변경 또는 확장이 어렵다. 본 논문에서는 사용자의 요구에 따라 서비스를 변경하거나 확장할 수 있도록 워크플로우 기반의 스마트 빌딩 서비스를 구현하였다. With the development of IoT technology, the scope of object controls and sensor information has expanded and services have been diversified. Energy saving efforts in buildings with high energy consumption is increasing, and services are being extended over life safety, security and convenience. However, Existing smart building services are dependent on IoT devices and are difficult to change or expand. In this paper, we have implement of workflow based smart building services to modify or extend services according to user`s needs.
이재희(Lee, Jaehee),박지희(Park, Ji-Hee) 한국어린이문학교육학회 2022 어린이문학교육연구 Vol.23 No.1
본 연구의 목적은 우리나라 부모의 보육만족도를 알아보고, EU 국가들과 비교하여, 우리나라 부모의 보육만족도를 증진시킬 수 있는 방안을 모색하기 위해 수행하였다. 연구대상은 만 7세 이하 자녀를 둔 유럽 33개국과 우리나라 부모들이었고, 국가별로 100∼300 여명이 대상이었다. 자료 분석방법으로 먼저, 우리나라의 주요 인구통계학적 변수에 따른 교육·보육 만족도를 t검증, F검증으로 살펴보았다. 다음으로, 국가별 비교를 위해 각 개별 문항 값에 대한 비교와 5개 문항을 통합한 점수 값에 대한 비교를 실시하였다. 연구결과, 우리나라 영유아 부모는 평균값이 10점 만점에 8점 이상으로 어느 정도 교육·보육에 대해 만족하고 있지만, 만족도 수준은 유럽 국가들 중 18위로 중위권으로 나타났다. 결론적으로, 우리나라 부모의 교육·보육 만족도를 높이기 위한 재정 투입 방향성을 고민해야 하며, 유럽 국가들처럼 부모의 교육·보육 만족도를 향상시키기 위한 다각적인 노력이 필요한 것으로 나타났다. The aim of this study is to discover Korean parents’ satisfaction with childcare and compare it with that of European countries. Through the results, we tried to find a way to improve the satisfaction of Korean parents with childcare. The subjects of this study were parents from 33 countries in Europe and Korea with children under the age of 7 years. About 100 to 300 people participated in each country. As a data analysis method, first, satisfaction with education and childcare according to major demographic variables in Korea was examined by t-test and F-test. Next, for the country-by-country comparison, each individual item value was compared and the score value integrating five questions was compared. As a result of the study, it was discovered that parents of children in Korea were somewhat satisfied with education and childcare, with an average value of 8 or more out of 10. Compared to European countries, the level of satisfaction in education and childcare for parents of children in Korea was ranked 18<SUP>th</SUP>, placing it in the middle. In conclusion, it is necessary to seriously consider the direction of financial input to increase the satisfaction of Korean parents with education and childcare. In addition, as in European countries, various efforts will be needed to improve parents" satisfaction with education and childcare.
Cross-Entropy를 이용한 전력계통계획의 확률적 기법 연구
이재희(Jaehee Lee),주성관(Sung-Kwan Joo) 대한전기학회 2009 전기학회논문지 Vol.58 No.11
Transmission planning is an important part of power system planning to meet an increasing demand for electricity. The objective of transmission expansion is to minimize operational and construction costs subject to system constraints. There is inherent uncertainty in transmission planning due to errors in forecasted demand and fuel costs. Therefore, transmission planning process is not reliable if the uncertainty is not taken into account. The paper presents a systematic method to find the optimal location and amount of transmission expansion using Cross-Entropy (CE) incorporating uncertainties about future power system conditions. Numerical results are presented to demonstrate the performance of the proposed method.