http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
VPP (Value Prior to Pulping) 부산물을 이용한 바이오에탄올 생산
이재원 ( Jae Won Lee ),김혜연 ( Hye Yun Kim ),( Thomas W. Jeffries ),최인규 ( In Gyu Choi ) 한국목재공학회 2010 목재공학 Vol.38 No.6
본 연구는 diethyl oxalate 처리로부터 얻어진 가문비나무 가수분해산물을 이용하여 에탄올 생산에 적합한 조건을 탐색하였다 가문비내무 가수분해산물의 단당류 분석 결과 아라비노오스를 제외한 발효가능한 당 농도는 29.04 g/ℓ이었으며 가수분해산물에 포함된 올리고머로부터 분해된 단당은 대부분 만노오스(39.26 g/ℓ)와 갈락토오스02.83 g/ℓ)가 차지하였다 발효저해물질인 5-HMF. furfural의 농도는 각각 0.09 g/ℓ. 0.04 g/ℓ. acetic acid는 1.4 g/ℓ . total phenolic compounds는 2.83 g/ℓ로 나타났다. 가수분해산물을 이용한 에탄올 생산 최적 pH는 6.0.으로 발효 48시간 후 1l.7g/ℓ의 에탄올을 생산하였다. 시간당 에탄올 생산량은 pH 5.0와 5.5에서 0.15 (g/(ℓ*h))로 나타났으며 pH 6.0에서는 0.24 (g/(ℓ*h))로 나타났다. 시간당 생성된 에탄올 생산량은 에탄올 발효 초기 pH에 따라 차이를 나타냈다. 가수분해산물에 xylanase 20 IU를 첨가하여 올리고머를 분해한후 발효를 실시한 결과 48시간 후 14.3 g/ℓ의 에탄올을 생산하였다. 이것은 xylanase를 첨가하지 않았을 때보다 에탄올 생산량이 22.2% 증가되었음을 나타내고 있다. In this study, we evaluated optimal conditions for ethanol production of the spruce hydrolysate (SH) obtained from diethyl oxalate pretreatment. Fermentable sugar concentration in SH was 29.04 g/ R except arabinose. Monosaccharides obtained from the oligomer degradation were mainly mannose (39.26 g/ℓ) and galactose (12.83 g/ℓ). Concenrration of 5-HMF and furfural which are inhibitors on ethanol fermentation were 0.09 g/ℓ and 0.04 g/ℓ respectively. Concentration of acetic acid and total phenolic compounds in SH were 1.4 g/ℓ and 2.83 g/ℓ. Ethanol production using hydrolysate was 11.7 g/ℓ at optimal pH 6.0 after 48 h. Specific ethanol production was 0.15 (g/ℓ*h)) at pH 5.0 and 5.5. while that was 0.24 (g/ℓ*h)) at pH 6.0. Specific ethanol production has difference depend on initial pH for fermentation. Ethanol production was 143 g/ℓ after 48 h when xylanase 20 IU was added in SH for degradation of oligomer during fermentation. It implied that ethanol production increased by 22.2% compare with control (without xylanase).
이세정(Lee, Se-Jung),김민웅(Kim, Min-Woong),이재원(Lee, Jae-Won),이상욱(Lee S.W.) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.7
본 논문은 중공을 가진 판재 두 매를 결합하기 위하여 중공 주위를 따라 기존 레이저 용접법 대신 기계적 프레스 결합법을 적용하는 것에 관한 연구이다. 이를 통해 레이저 용접을 적용했을 때 불가피하게 발생하는 열 변형 을 효과적으로 없앨 수 있다. 유한요소해석을 통하여 중공형 판재를 기계적으로 결합시킬 수 있는 금형 설계 방법을 제안하였다. 기계적 결합력을 최대화시키는 데 관련 있는 다섯 가지 설계인자를 선택하여 다꾸치 실험법을 적용한 결 과 성형 깊이와 펀치모서리 반경이 가장 크게 영향을 미치는 인자로 나타났다. This study is to apply the mechanical press joining method to join two kinds of sheet metals with circular holes by mechanical pressing instead of laser beam. Usage of the mechanical pressing avoids the thermal deformation of sheet metals which occurs inevitably in laser joining. A die design has been proposed to make the mechanical press joining applicable with finite element analysis. Five design factors related to the joining force have been selected and applied to the Taguchi method for optimization. Among five factors, 'Forming Depth' and 'Punch Corner Radius' have been revealed to be the most influential ones.
비면허 대역 LTE 시스템의 성능 평가를 위한 5G K-SimSys 기반의 시스템 레벨 시뮬레이터의 구현
김다윗(David Kim),양찬석(Chan S. Yang),이재원(Jae W. Lee),강충구(Chung G. Kang) 한국통신학회 2018 한국통신학회 학술대회논문집 Vol.2018 No.6
본 논문에서는 5G 규격의 시스템 레벨 성능을 평가하는 모듈 기반 공개형 시뮬레이터인 5G K-SimSys 를 이용하여 비면허 대역의 LTE 시스템을 위한 3GPP Release 13 Licensed-Assisted Access (LAA) 규격을 구현하고, 그 성능을 분석하고자 한다. 이를 위해 기존 5G K-SimSys 에서 LAA 규격의 Listen-Before-Talk (LBT) 프로토콜에 근거한 기지국의 채널 접속 절차를 위한 새로운 기능 모듈을 구현하였으며, 다양한 환경에서 medium access control (MAC) 계층에서의 충돌 확률과 수율을 평가함으로써 해당 모듈의 동작을 검증하였다.
바이오에탄올 생산을 위한 백합나무(Liriodendron tulipifera) 칩의 동시당화발효 및 Response Surface Method를 이용한 옥살산 전처리 조건 탐색
김혜연 ( Hye Yun Kim ),이재원 ( Jae Won Lee ),최인규 ( In Gyu Choi ),( Thomas W. Jeffries ) 한국목재공학회 2011 목재공학 Vol.39 No.1
이 연구에서는 백합나무(Liriodendron tulipifera)를 옥살산으로 전처리한 시료로부터 에탄올 생산 가능성을 조사하고, response surface methodology(RSM)를 도입하여 전처리 조건을 분석하고자 한다. 산농도, 전처리 시간, 반응 온도를 조절하여 2(3) factorial central composite experimental design을 바탕으로 각기 다른 l5가지의 전처리 조건에서 시험하였다(central point에서 2반복). 전처리 후 고체 시료는 발효 균주인 Pichia stipitis를 사용하여 동시 당화발효로 에탄올 생산에 이용되었으며, 각각의 시료에서의 72시간에서의 에탄올 생산량(y,g/ℓ)이 최대값으로, 종속변수로써 RSM에 적용되었다. 180℃에서 40분간 0.013 g/ g의 옥살산으로 처리한 시료가 가장 많은 양의 에탄올(9.7 g/ℓ)을 생산하였으며, response surface methodology 분석에 따르면, 전처리 조건에서 온도 인자가 ethanol에 가장 큰 영향을 미치는 것으로 제시되었으며, 결과는 수식화되어 나타내었다. The main purpose of this study is to evaluate the potential of producing bioethanol from yellow poplar (Liriodendron tulipifera) wood chips by oxalic acid pretreatment and to examine the pretreatment conditions by response surface methodology (RSM). Based on 2(3) factorial design, adjusted variables were reaction temperature (℃), residence time (min), and acid loading (g/g), and a series of distinct 15 experimental conditions was organized with duplication at central point (total 16 performances). After pretreatment, simultaneous saccharification and fermentation (SSF) was subjected on solid fraction with yeast strain Pichia stipitis Maximum ethanol yields of the most samples were measured at 72 hours and applied to RSM as a dependent variable. 9.7g/ℓ of ethanol was produced from the solid pretreated at 180℃ for 40 min with 0.013g/g of oxalic acid loading. According to the response surface methodology, it was determined that the temperature is the most governing factor via statistic analysis.