A STUDY OF THE HISTORICAL EARTHQUAKE CATALOG AND GUTENBERG-RICHTER PARAMETER VALUES OF THE KOREAN PENINSULA

Seo, Jeong-Moon,Choi, In-Kil,Rhee, Hyun-Me Korean Nuclear Society 2010 Nuclear Engineering and Technology Vol.42 No.1

The KIER's Korean historical earthquake catalog was revised for MMI${\geq}$VI events recorded from the years 27 A.D. to 1904. the magnitude of each event was directly determined from the criteria suggested by Seo. The criteria incorporated the damage phenomena of the Japanese historical earthquake catalog, recent seismological studies, and the results of tests performed on ancient structures in Korea. Thus, the uncertainty of the magnitudes of the Korean historical earthquakes can be reduced. Also, the Gutenberg-Richter parameter values were estimated based on the revised catalog of this study. It was determined that the magnitudes of a maximum inland and minimum offshore event were approximately 6.3 and 6.5, respectively. The Gutenberg-Richter parameter pairs of the historical earthquake catalog were estimated to be a=5.32${\pm}$0.21, b=0.95${\pm}$0.19, which were somewhat lower than those obtained from recent complete instrumental earthquakes. No apparent change in the Gutenberg-Richter parameter is observed for the $16^{th}-17^{th}$ centuries of the seismically active period.

관상동맥경화증의 정도와 내장지방비만과의 관계

서정기,김동수,권혁문,장양수,김현승,조홍근,조은영,이종호 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.7

Sr·페라이트 플라스틱자석의 제조에 관한 연구

문현욱,최희태,서강수,신용진 明知大學校 産業技術硏究所 1995 産業技術硏究所論文集 Vol.14 No.-

In this paper, we mention he fabrication of Sr ferrite plastic magnet. In order to compose Sr ferrite, first, a little CaO, SiO₂, Na₂SiO₃, and Al₂O₃ are added to SrO5.9Fe₂O₃. Then, the composition is calcinated at 1225℃ under N₂ enviroment for 1 hourwith addition of PVA 5wt% solution. The carbon coating method increase grinding effect on powder fabrication. To fabricate anisotropic Sr ferrite plastic magnet, 80-89wt% of Sr ferrite and polyamide6 are kneaded and then 0-12kOe of magnetic field is applied. On magnet fabrication, an optimal condition of injection mold is obtained under the injection temperature 270℃, the injection pressure 120㎏/㎠, the magnetic field 8kOe and magnetic field applied time 8sec. As the result of experiments, we obtain (BH)max = 2.09MGOe property on anisotropic plastic magnet which is fabricated by using injection mold method in magnetic field.

급성 심근경색증에서 혈전용해제 투여 전후 혈액응고 및 혈전용해능의 비교연구

서정기,김동수,권혁문,김인재,장양수,김현승,송경순 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.5

전경대원에서 발생한 결핵의 임상 양상

문창기,박상준,조민구,김영중,김소연,김윤권,정준오,안석진,김은실,서승오,김지훈,최원제,이윤영,박형기,최규영,김현근 대한감염학회 2006 감염과 화학요법 Vol.38 No.6

Background: The purpose of this study was to document the incidence and clinical characteristics of patients with tuberculosis (TB) in combat and auxiliary police, living in a group, in Korea where the incidence rate of active TB in a general population is higher than in Western countries. Materials and Methods:We retrospectively reviewed the medical records of all tuberculosis patients diagnosed at National Police Hospital from January 2002 through December 2004. Results:In 2002-2004, a total of 156 cases of tuberculosis were identified with the mean (Standard deviation) age of 20.6 (±1.0) years. Of these, 134 (85.9%) patients were registered as new cases, 11 (7.1%) as relapse, 2 (1.3%) as failure, 5 (3.1%) as treatment-after-default cases whereas 4 (2.6 %) patients were not included in any categories. Average annual new TB rate and smear-positive TB rate were 86.5/10^(5) and 17.4/10^(5) person-years, respectively. In 12 of 31 smear-positive cases, time from onset of symptoms to diagnosis was more than 30 days. Two multidrug-resistance TB cases were identified and two suspected outbreak episodes of TB had occurred during 3 years. Conclusion:There was no statistically significant difference in the incidence rate of new cases of TB between the general population aged 20 to 29 years and combat and auxiliary police in Korea. 배경 : 국내 결핵의 발생은 감소 추세에 있으나 여전히 후진국형 발생양상을 보이고 있다. 특히 집단생활을 하는 젊은이들에서 발생하는 결핵의 유행이 간헐적으로 알려지고 있어 우려를 낳고 있다. 이에 저자들은 최근 전경대원의 결핵 발병 양상에 대해 알아보고자 본 연구를 시행하였다. 재료 및 방법 : 2002년 1월부터 2004년 12월까지 3년간 경찰병원에서 결핵 진료를 받은 전경대원의 의무기록을 후향적으로 분석하여 연도별 결핵 신환발생률, 도말양성결핵 신환율, 진단 지연, 집단발병, 다제내성결핵을 조사하였다. 결과 : 연도별 결핵 신환자 수(10만명당 발생추정치)는 2002년 50명(83.6명), 2003년 42명(83.7명), 2004년 42명(93.5명)이었고 도말양성 폐결핵 신환자 수는 2002년 10명(16.7명), 2003년 11명(21.9명), 2004년 6명(13.4명)이었다. 3년간 도말양성 폐결핵 환자는 31명이 있었고 그 중 12명은 호흡기 증상 발생 30일이 지나서 진단을 받았다. 다제내성 결핵은 2명이 있었으며 결핵의 집단발병이 의심되는 사례는 2차례 있었다. 결론 : 전경대원과 20-29세 연령군 일반인의 결핵 신환발생률, 도말양성 폐결핵 발생률의 통계적으로 유의한 차이는 없었다.

전력용 반도체소자(IGBT)의 모델링에 의한 열적특성 시뮬레이션

서영수,백동현,조문택 (社)韓國火災 ·消防學會 1996 한국화재소방학회논문지 Vol.10 No.2

A recently developed electro-thermal simulation methodology is used to analyze the behavior of a PWM(Pulse-Width-Modulated) voltage source inverter which uses IGBT(Insulated Gate Bipolar Transistor) as the switching devices. In the elestro-thermal network simulation methdology, the simulator solves for the temperature distribution within the power semiconductor devices(IGBT electro-thermal model), control logic circuitry, the IGBT gate drivers, the thermal network component models for the power silicon chips, package, and heat sinks as well as the current and voltage within the electrical network. The thermal network describes the flow of heat form the chip surface through the package and heat sink and thus determines the evolution of the chip surface temperature used by the power semiconductor device models. The thermal component model for the device silicon chip, package, and heat sink are developed by discretizing the nonlinear heat diffusion equation and are represented in component from so that the thermal component models for various package and heat sink can be readily connected to on another to form the thermal network.

O_3/활성탄에 의한 고도정수처리에 미치는 기존처리공정의 영향에 관한 연구

김현정,서규태,문병현,이택순 7개 국립대학교 환경연구 논문집 공동발행 위원회 2001 환경연구논문집 Vol.1 No.1

The effect of conventional process, such as coagulation, sedimentation and rapid sand filtration, on O_3/GAC was evaluated for stable operation of the advanced treatment process. Five years long term water quality data was analyzed for a water treatment plant adopting O_3/GAC. Treatment efficiency of unit process in the plant was also monitored for 7 months(from 2000. 11 to 2001. 5) to investigate the pre-treatment effect on the operation of the process. Despite significant seasonal variation of raw water quality, treated water of the plant was good enough to meet drinking water quality standard. However effluent turbidity (1NTU) of sand filter was relatively high compared to the guideline that turbidity of filtered water should be lower than 0.3NTU for the effluent turbidity, 2NTU, of sedimentation tank. It was observed that effluent organic compound of sand filter gave an adverse effect on the running time of GAC filter. This phenomenon could be deduced from the correlation of the effluent water quality of sand filter and GAC in terms of TOC and UV-254. Therefore more sophisticated operation, such as adopting enhanced coagulation, should be given to the conventional process for stable and extended operation of GAC filter to produce safer drinking water even at deteriorated raw water quality.

전기집진기 Layout 설계를 위한 소프트웨어 개발

조현덕,윤문철,박기서 한국공작기계학회 1997 한국생산제조학회지 Vol.6 No.1

Electrostatic precipitator is the equipment that separates dust particles from the gas in which they are suspended. Specially, for the construction of industrial electrostatic precipitator, the corporations would send the layout design to a customer to accept an order. Therefore, it is mae a detail drawing after accept ance. Since the layout design of electrostatic precipitator is very complex, it takes time and design errors are included. Thus, for competitiveness in these industries, the development of software for the layout design of electrostatic precipitator is important. In this study, the developed software deals with technical concept and layout design of industrial electrostatic precipitator. By using the software, design time was very short, design errors reduced largely, and the standardization of design could be carried out.

저혈청 배지에서 인간 전골수세포(HL-60)를 이용한 tPA 생산과 세포사멸기작에 관한 연구

김현구,성기돈,김태호,안주희,함문선,박진서,이현용 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.1

tPA 생산과 세포 사멸의 연구를 하기 위해서 인간 전골수세포가 배양되었다. 연속 관류 배양하에서 최대 tPA 생산량은 324 ng/ml이며 최대 세포 농도는 5.27×10 exp (6) cells/ml였다. Phorbol ester를 넣었을 때 tPA 생산량은 420 ng/ml까지 향상되었다. 형광 현미경으로 관찰했을 때, apoptosis는 세포 배양 초기부터 중반까지 우세했고 빠른 교반 속도에서도 우세했다. 그러나 necrosis는 세포배양 말기와 동결된 세포가 해동 되었을 때 우세했다. HL-60 was cultivated to produce tPA (tissue-type plasminogen activator) and study the mechanism of cell death. Maximum cell density and tPA production were obtained as 5.27×10 exp (6) cells/ml and 324 ng/ml, respectively under perfusion cultivation. tPA production was enhanced to 420 ng/ml in adding 160 nM of phorbol ester. The cells were gradually differentiated to granulocytes rather than proliferation. By Fluorescent microscope, apoptosis was prevailed except the death phase and in high agitation speed, but necrosis was prevailed in thawed cells and during the latter periods of the cultivation. It was also proved that tPA was most produced in apoptosis. To obtain higher tPA productivity, the cells must be maintained in apoptosis, not necrosis phase when the cells were dying.

1866∼7년 데이 드레스(day dress)의 설계 및 디자인 분석

김문숙,이서희,오현남,한성지,김현주 서울여자대학교 자연과학연구소 1996 자연과학연구논문집 Vol.7 No.-

As the current stage of the fashion begins to follow the styles of the past, the study on the past costume is getting more important, and as the methodology of the study accurately approached study through the rehabilitation of the past costume is more needed than the simple rearrangement of the historical documents. By this methodology, this study can be positioned as a recreation activity. The results of the study are as follows. 1) Style : The general silhouetts is the late crinoline style which is the period from 1860s to just before bustle. The dress is one-piece composed of fitted bodice, and skirt which the front is flat, side and back is triangular shape to the skirts. 2) Color and Material : the main color is pale stone and the sub-color is ivory and blue. The dress is made of a silk surface and cotton back and partly satin and velvet. 3) Pattern and sewing : the dress is together sewing comnined with lining and fabric. The skirt is gored skirt, the number of patterns is plenty because of the plenty of width of skirt. The double piping has various effect not only to decorate but also to conceal the seam, support the silhouette. 4) Detail : The general detail is double piping which are repeatedly used to decorate stand collar, bands of sleeve, froint bodice and gored panel seam of skirt. And the fringe and velvet ribbon are used to decorate the dress. 5) Structural characteristics : The double piping, velvet ribbon and twilled cotton are used to emphasize structural characteristics of crinoline style. And the waistband which is backed with a webbing band to reinforce it is also the structural characteristics. Synthetically, the 1886~7 day dress has the characteristics of transitional stage in which the chararcteristics of the costume of 1860s and the remnants of the characteristics of the previous costume style, and shows the characteristics of day dress well in terms of the style, color and fabrics, pattern and sewing, detail, and structural characteristics.