새터민의 기초직업능력 진단

이찬,이용환,이윤조,신재호,홍윤선,최홍주 한국농업교육학회 2007 농업교육과 인적자원개발 Vol.39 No.3

이 연구는 새터민의 고용현황 및 문제점을 고찰하고 새터민의 기초직업능력을 진단하여 직업능력개발 방향에 있어 시사점을 제공하는데 그 목적이 있었다. 새터민의 기초직업능력 진단을 위한 도구는 관련 문헌 고찰과 pilot test 및 새터민 교육ㆍ지원 담당자의 안면타당도 검증 등을 통하여 개발되었다. 연구의 목적을 달성하기 위하여 현재 하나원에서 사회 적응교육 및 직업교육을 받고 있는 새터민의 기초직업능력을 진단함으로써 우리나라에 거주하는 새터민의 기초직업능력을 파악하였다. 주요 결과는 다음과 같다. 첫째,새터민들의 기초직업능력 중에서 직업윤리능력은 상당히 갖추어져 있는 것으로 인식하고 있으며,정보능력,즉 컴퓨터 사용능력은 상대적으로 낮은 수준으로 평가하고 있다. 둘째,성별에 따라서는 기초직업능력에 있어서 통계적으로 유의미한 차이를 보이지 않았다. 연령에 따라서는 정보능력과 수리 능력,조직이해능력 영역에 있어서 통계적으로 유의미한 차이를 보였다. 셋째,학력에 따라서는 문제해결능력과 의사소통능력,수리능력,대인관계 영역에 있어서 통계적으로 유의미한 차이를 보였다. 넷째,새터민의 취업을 위한 기초직업능력 개발에 있어 정보능력,수리능력,의사소통능력의 비중 확대,수준별ㆍ맞춤형 교육프로그램개발,새터민을 위한 취업 및 사업정보 제공 등을 제시하였다. The purpose of this study was to explore the current employment status and HRD issues of North Korean refugees and to assess their level of the basic vocational competencies. The assessment tool for the basic vocational competencies was developed based on literature reviews and pilot tests from the North Korean refugees. The face validity was verified by educators and counselors for the North Korean refugees. The major findings in this study were as follows: First, among the basic vocational competencies of the North Korean refugees, the level of vocational ethics was the highest and the level of information teachnology competency was the lowest. Second, the North Korean refugees' basic vocational competencies showed no statistical differences by gender. Territories of information competency, mathematical competency, and communication competency showed statistical differences by age. Third, territories of problem-solving competency, communication competency, mathematical competency, mathematical competency, and communication competency showed statistical differences by education level. Fourth, to develop the basic vocational competencies for North Korean refugees, the following suggestions were presented.; 1) extend the importance of information technology, mathematical, and communication competencies,; 2) develop the customized training programs by competency level,; and 3) offer the employment information for North Korean refugees.

Cytoreductive surgery with hyperthermic intraperitoneal chemotherapy in management of peritoneal carcinomatosis: Single center experience in Korea

Hee Ju Lee1,HyungJoo Baik1,박요한,서상혁,김광희,Ki Beom Bae,Kwan Hee Hong,김기향,변정미,Dae Hoon Jeong,Kyung Bok Lee,오민경,조광래,안민성 대한종양외과학회 2019 Korean Journal of Clinical Oncology Vol.15 No.2

Purpose: Peritoneal carcinomatosis (PC) has been considered a terminal condition and cytoreductive surgery with hyperthermic intraperitoneal chemotherapy (CRS/HIEPC) is regarded as an alternative therapeutic option. This study aimed to evaluate the 30-day clinical outcomes of CRS/HIPEC and the feasibility of the surgery by investigating the morbidity and mortality in Inje University Hospital. Methods: Data were retrospectively collected from 19 patients with PC who underwent CRS/HIPEC at Inje University Hospital in 2018. We evaluated pre-, intra-operative parameters and postoperative clinical outcomes and early complications. Results: The mean operating time was 506.95 minutes and the mean blood loss was 837.11 mL. Six cases (31.58%) had morbidity of grade III or above. A longer operating time (≥560 minutes, P=0.038) and large blood loss (≥700 mL, P=0.060) were positively correlated with grade III or worse postoperative complications. Conclusion: Our early experience with CRS/HIPEC resulted in a 31.58% morbidity rate of grade III and above, with risk factors being longer operating time and greater intraoperative blood loss. As the surgical team’s skills improve, a shorter operating time with less intraoperative blood loss could result in better short-term outcomes of CRS/HIPEC.

교대로 운전되는 두 개의 UV/광촉매반응기로 구성된 폐가스 처리시스템에서의 광촉매의 비활성화 및 재생 특성

이은주 ( Eun Ju Lee ),정찬홍 ( Chan Hong Chung ),임광희 ( Kwang-hee Lim ) 한국화학공학회 2021 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.59 No.4

본 연구에서는 교대로 운전되는 두 개의 UV/광촉매 반응기로 구성된 폐가스 처리시스템의 운전단계와 단계별 광촉매의 비활성화의 상관관계를 사용된 광촉매에 대한 기기분석을 통하여 규명하였다. 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]의 광촉매 반응기 시스템 운전에 사용되지 않은 광촉매를 담지한 다공성 SiO₂ 담체(A4), 1회 운전하는 동안 사용되고 재생을 경험하지 않은 광촉매를 담지한 다공성 SiO₂ 담체(A1), 2회 운전에 사용되고 1회 재생된 광촉매를 담지한 다공성 SiO₂ 담체(A2) 및 3회 운전에 사용되고 2회 재생된 광촉매를 담지한 다공성SiO₂ 담체(A3)와, 1차 재생(AD1) 또는 3차 재생(AD3)된 광촉매를 담지한 다공성 SiO₂ 담체에 대한 BET 분석, SEM, XPS, SEM-EDS 및 FTIR 분석 등을 수행하여, 광촉매를 담지한 다공성 SiO₂ 담체의 비활성화 및 재생 특성을 포함하는 특성 분석을 수행하였다. 그 결과로서, 3회 이상의 여러 번 재생을 수행하는 광촉매의 적정 재생 온도를 200℃ 미만으로 도출하였다. 이러한 광촉매의 적정 재생 온도는 BET 분석결과에서 도출된 기공에 흡착된 에탄올 산화분해 중간생성물의 대부분이 완전 분해가 되어 기공이 재생되는 재생 온도와 거의 일치하였다. 특히, XPS 분석 결과는, 선행 연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서 광촉매 반응기의 첫 번째 운전 후에 광촉매의 미세한 비활성화가 발생하였음을 나타내었다. 또한, XPS 분석 결과는, 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서 광촉매 반응기의 두 번째 운전에서 비교적 큰 광촉매의 비활성화가 발생하여 첫번째 운전성능보다 약 5%만큼 못 미치는 에탄올과 황화수소 각각의 제거효율을 초래하였으나, 세 번째 운전에서의 에탄올과 황화수소의 제거효율은 두 번째 운전에서의 에탄올과 황화수소의 제거효율 실험 결과와 거의 비슷하였다는 연구 결과와 일치하였다. 한편, AD3를 사용하여 선행연구[Lee와 Lim, Korean Chem. Eng. Research, 59(4), 574-583 (2021)]에서와 같은 광촉매 반응기의 네 번째 운전을 수행할 것을 가정하면, 두 번째 운전에서보다 더 큰 광촉매의 비가역적 비활성화의 발생으로 인하여 에탄올과 황화수소 제거효율이 가장 크게 저하되리라 예상되었다. In this study, the correlation between operating stages of waste air-treating system composed of two alternatively-operating UV/photocatalytic reactors, and the deactivation of photocatalyst used in each operating stage, was investigated by instrumental analysis thereon. The repeated deactivation and subsequent re-generation of photocatalyst used in the waste air treating system of previous investigation performed by Lee and Lim (Korean Chem. Eng. Research, 59(4), 574-583(2021)), were characterized on virgin photocatalyst-carrying porous SiO₂ media (A4), used photocatalystcarrying porous SiO₂ media (A1, A2 and A3) collected from the corresponding photocatalytic reactor upon 1^st, 2^nd, and 3^rd run, respectively, regenerated photocatalyst-carrying porous SiO₂ media upon 1 time-run (AD1) and 3 times regenerated photocatalyst-carrying porous SiO₂ media upon 3 time-runs (AD3) by instrumental analysis including BET analysis, SEM, XPS, SEM-EDS and FT-IR. As a result, the proper regeneration-temperature for deactivated photocatalyst to be regenerated several times (more than 3 times), was suggested below 200℃. Such temperature of deactivated photocatalystregeneration was almost consistent to the one, according to BET analysis, at which tiny nano-pores blocked by adsorbed ethanol-oxidative and degraded intermediates (AEODI), were regenerated to be reopened through almost complete mineralization of AEODI. In particular, the results of XPS analysis indicated an incurrence of insignificant deactivation of photocatalysis upon 1^st run of UV/photocatalytic reactor (A or C) of the previous investigation. In addition, the results of XPS analysis were consistent with the experimental results of the previous investigation in that 1) deactivation of photocatalyst incurred during 2^nd run of the UV/photocatalytic reactor (A or C) resulted in decreased removal efficiency, by ca. 5% and 5%, of ethanol and hydrogen sulfide, respectively, compared with its 1^st run; 2) there was insignificant difference between the removal efficiencies of its 2^nd run and 3^rd run. Furthermore, the removal efficiencies of ethanol and hydrogen sulfide for hypothetical 4^th run of photocatalytic reactor in the previous investigation, using AD3, were expected to decrease, compared with its 3^rd run, by much more than those for 2^nd run in the previous investigation did, compared with its 1^st run.

The Identification of Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, Using Macroscopic, Microscopic and Physicochemical Methods

Jee-Hyun Yoon,Ha-Yeong Park,Tae-Ju Kim,Seung-Ho Lee,Jung-Hoon Kim,Guem-San Lee,Hong-Jun Kim,Young-Sung Ju 대한한의학회 2014 대한한의학회지 Vol.35 No.4

The Identification of Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, Using Macroscopic, Microscopic and Physicochemical Methods

Yoon, Jee-Hyun,Park, Ha-Yeong,Kim, Tae-Ju,Lee, Seung-Ho,Kim, Jung-Hoon,Lee, Guem-San,Kim, Hong-Jun,Ju, Young-Sung The Society of Korean Medicine 2014 대한한의학회지 Vol.35 No.4

Objectives: This study aimed for establishing the discriminative criteria for Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, which can be confused as 'Mokhyang', because of similar appearances and synonyms. Methods: Morphological characteristics of dried herbal medicines were compared by macroscopic observation. To examine microscopic features of 'Mokhyang', paraffin embedding and the staining by using Ju's method were conducted. Physicochemical experiments were performed using HPLC analysis and antioxidant assay. Results: The types of stem, phyllotaxy and leaf shape were chosen as macroscopic criteria and the size, oil spots, color and root top as well as phloem and central cylinder were compared using microscopic features. The HPLC results showed different amounts of costunolide and dehydrocostuslactone among Aucklandiae Radix, Inulae Radix and Vladimiriae Radix. However, Aristolochiae Radix only contained aristolochic acid. The antioxidant assays also showed that Vladimiriae Radix exhibited strongest antioxidant activity followed by Aucklandiae Radix, Inulae Radix and Aristolochiae Radix. Conclusions: These results demonstrate that macroscopic, microscopic and physicochemical methods would be useful tools for the discrimination of 4 kinds of 'Mokhyang'.

막장부의 융기효과를 고려한 실드터널의 2차원 탄소성해석

이홍주,김수석 釜山大學校生産技術硏究所 1997 生産技術硏究所論文集 Vol.52 No.-

밀폐형 실드터널이 연약지반에서 시공됨에 따라 터널굴착시 막장면에서 연속적인 지지가 가능해지게 되었다. 이러한 터널 시공법은 초기 융기효과로 인하여 테일보이드 폐합시 세그먼트 쪽으로 흙의 이동을 감소시키게 되며 이는 지반침하와 굴착시 막장의 붕괴를 방지하는 데 많은 도움을 줄 수 있다. 본 연구에서는 밀폐형 실드의 일종인 슬러리(slurry) 실드와 EPB 실드의 계측치를 이용하여 본 연구에서 개발된 2차원 탄소성 유한요소 실드전용 프로그램(EPSHILD)을 검증하였다. 해석결과는 계측치와 비교적 잘 일치함을 알 수 있었다. 본 연구는 실드시공시 발생하는 즉시침하에 근거를 둔 것이며 장기침하에 대해서는 고려하지 않았다. The construction method by the closed-faced shield tunnel have been developed in soft ground, which made it possible to support continuously on the excavation face. The construction method by the closed-faced shield tunnel causes a movement of soil toward segments to help with a lot of things to prevent a breakdown of excavation face and ground subsidence. To verify the analysing method by 2-dimensional elasto-plastic finite element shield analysis program (EPSHILD) developed in this paper, the data measured at slurry and EPB shield which are kinds of the closed-faced shield were used. The analysis results showed good agreements with the measured data. This study is based on the instantaneous settlement which is occured in the process of shield construction but not long-term settlement.

합성섬유를 혼입한 콘크리트의 강도 및 내구특성

홍창우,정영화,이주형,이정호 江原大學校 産業技術硏究所 1998 産業技術硏究 Vol.18 No.-

Concrete structures has been deteriorated by poor environment. This study was conducted to evaluate durability of concrete which are increasingly demanded recently. Therefore, the research of durability must be executed for application of Polypropylene fiber reinforced concrete real structures. Concrete durability properties incorporating Polypropylene fiber was performed with the variable of Fiber contents, Fiber type and Target strength, specimens were made and subjected to durability and strength tests. The results show that strength of concrete is increased the Fiber content increase, Mono-Filament fiber and Polypropylene fiber reinforced concrete makes improved durability properties.

구내신연장치를 이용한 치조골증대술 후 임프란트 매식 : 치험 5예 REPORT OF 5 CASES

이용욱,박충열,송종운,박홍주,김영운,오희균,유선열 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.2

Successful alveolar ridge augmentation by distraction osteogenesis method has been reported previously. There are several types of devices for alveolar ridge augmentation. In this paper, a new intraoral distraction device was used on the severe atrophic mandible in order to distract an alveolar ridge vertically in 5 patients. Mean amount of distracted alveolar ridge was 7.4㎜ (5∼9.5㎜). Dental implants were placed in the distracted alveolar bone and good osseointegration was obtained in all patients. Mean follow up period is 2years 6months (7months∼4years 9months). No complications, such as infection or resorption was observed in all patients. Alveolar ridge augmentation by gradual distraction seems to be a safe, simple and reliable procedure.

진동감쇠 장치를 부착한 트레일러의 수직진동

이홍주,홍종호,김성엽 한경대학교 2003 論文集 Vol.35 No.-

This study was aimed to find out the basic information for reducing damage of agricultural products during transportation. The vibration absorption system, consisted of suspension at wheel mounting and coil spring & rubber at hitch part, was developed and tested for the vibration characteristics. The vertical acceleration level was measured at 6 positions, i.e. engine, hitch, seat, and three parts of trailer(front, middle, and rear) according to the low(500rpm), medium(1000rpm), and high(1200rpm) engine speed. The results of this research could be summarized as follows; (1) For low engine speed of 500rpm, the average vertical accelerations were in the range of 0.11~0.27 m/s² by the sensing positions. The higher vertical accelerations were occurred at seat and front position of trailer in order. The vertical accelerations were distributed up to 100Hz at engine, hitch and trailer position, but were equally distributed up to 400Hz at seat position. At three positions of trailer, the peak accelerations of 0.3~1.0 m/s² was occurred one or two times. (2) For medium speed of 1000rpm, the average vertical accelerations were higher in low frequency range, but decreased in higher frequency range up to 300Hz at engine and hitch positions. The vertical accelerations were equally distributed up to 379Hz at seat position, but distributed up to 170Hz at trailer, and the peak accelerations of 0.8, 0.4, 0.2 m/s² were occurred one or two times at front, middle, and rear side of trailer, respectively. (3) For high speed of 1200rpm, the average vertical accelerations were equally distributed up to 400Hz at engine, hitch and seat positions, but up to 500Hz at trailer. The peak acceleration of 0.3m m/s² was occurred two or three times at trailer position. (4) For driving power tiller at speed of 0.35m/s on the controlled road, the peak vertical acceleration were occurred in the range of 80~150Hz at engine, hitch, and rear side of trailer position. The vertical accelerations were very low level for higher frequency range over 200Hz.

타타늄의 열처리 조건에 따른 동전위 양극분극특성 및 표면 미세구조 변화

주동현,이용렬,정영화,양홍서,박상원,이도재,송호준,박영준 大韓齒科器材學會 2002 대한치과재료학회지 Vol.29 No.2

The corrosion resistance of metallic implants is essential for successful implant osseointegration. Moreover, the implant surface should have appropriate surface roughness for the attachment of the osteoblast and collagen fibrils. When titanium is exposed to air a thermodynamically very stable oxide film is formed at once. This oxide is very thin and yet it protects the metal from corrosion instantaneously. However, the oxide would not be ideal, and it would be supposed that the state of oxide film would be various by the different conditions when it is formed. The objective of this study was to evaluate the electrochemical properties and surface microstructural changes of titanium after passivation treatment or exposure to high heat (in vacuum or in air). ASTM grade 2 commercially pure titanium (Ti) disks of 10㎜ diameter were wet ground and polished with 240 and 600 grit SiC, and then ultrasonically cleaned with distilled water and ethanol. Cleansed as-received samples (As-R group) were passivated with 30% nitric acid solution at 50℃ for 15 minutes to make the Pas group. The Std-V samples were made by treating the Ti disks in vacuum quartz tube (10^-8 Torr) at 530℃ for 40 min for stress relieving, followed by annealing at 700℃ for 90 min, and then slow cooling to room temperature. The Std-A samples undergo identical procedure as the Std-V group except that it is done in air. For 530℃-V samples, Ti disks were heated at 530℃ for 40 minutes and slow cooled to room temperature. The 1000℃-V samples were produced by heating Std-V specimens again at 1000℃ for 2 hr, followed by cooling to room temperature. 530℃-A and 1000℃-A samples were also prepared. Potentiodynamic anodic polarization measurement, SEM, AFM and XRD analysis were performed to evaluate the effects of the various treatments. The difference in the mean values of E_corr between groups showed statistically significant difference (P<0.05), but that of I_corr did not show significance (P>0.05). When Ti surface was passivated there was a shift of corrosion potential (E_corr) in the noble direction and a lower corrosion current density (I_corr) value. Std-A samples showed most noble E_corr value among the tested groups. 530℃-V samples showed more noble E-corr than other tested groups except Std-A group. 1000℃-V samples showed more noble E-corr than those of Std-V sample. In the case of Std-, 530℃- and 1000℃-groups, -A sub-groups showed better corrosion resistant characteristics than -V sub-groups in regard to E-corr and I_corr values. In the SEM observations, the surfaces of the As-R samples showed only scratch line on smooth surface. In Pas samples, thick oxide layer covered the surface under high magnification observation. 530℃-A samples were covered by oxide granules, and Std-A samples had 25~50 nm-thick acicular oxides. The 1000℃-A samples were covered by coarse oxide crystals with a granule diameter of 0.1~0.6 μm having a gross appearance of milky white color, which was identified by XRD as a rutile. On the other hand, 1000℃-V samples showed an Widmansta¨tten structrue of which the orientation of the lattice is formed along crystallographic planes of the parent crystals. On the AFM observation, 530℃-A samples showed RMS roughness of 79.38 nm which is 5 times rougher than those of the As-R samples. Std-A sample had a roughness of 330.47 nm which is about 20-times rougher than that of the As-R sample. 1000℃-A samples were covered by coarse granular oxides and the roughness were about 0.56 μm. Vacuum sub-group samples showed a more smooth surface than air sub-group samples, and the oxide film was more dense. Due to variability of the surface treatment and heat treatment conditions, the process of the oxide formation seems to be affected thereby making the corrosion properties and surface micro-morphology different. However, more various electrochemical analysis together with surface analysis, and an investigation for the effects of those on the osteoblast cell adhesion and calcium phosphate apposition are needed for the improvement of the osseointegration rates of the titanium implants.