http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황선광,백현무,주호선,임용택 대한금속·재료학회 2015 METALS AND MATERIALS International Vol.21 No.2
In this work, a multi-pass continuous hybrid (CH) process was experimentally applied with up to five passeswith three processing routes, A, Bc, and C, to check the practicality of the processing routes and investigatetheir effect on the mechanical properties, microstructure, and texture evolutions of low-carbon steel wires. According to the present investigation, the wires processed by the 5th pass CH process with route A showed thehighest ultimate tensile strength value (762 MPa) compared to those for routes Bc (718 MPa) and C (720 MPa),respectively. Based on the compression test results, the CH processed wire showed good workability whenthe aspect ratio was smaller than 2.4 for all the processing routes. According to the microstructure and textureevolutions, the grain sizes of the 5th pass CH processed wires decreased for all the processing routes than that ofthe initial specimen, and the wires showed mixed texture distribution of shear and drawing texture components. From the present investigation, it was concluded that the processing routes of the CH process couldstrongly affect the microstructure and texture evolutions, resulting in changes of the mechanical propertiesand workability of the low-carbon steel wires.
입력전압 범위가 향상된 저면적 이중출력 스위치드 커패시터 DC-DC 변환기
황선광,김성용,우기찬,김태우,양병도,Hwang, Seon-Kwang,Kim, Seong-Yong,Woo, Ki-Chan,Kim, Tae-Woo,Yang, Byung-Do 한국정보통신학회 2016 한국정보통신학회논문지 Vol.20 No.9
본 논문에서는 입력전압 범위가 향상된 저면적 이중출력 스위치드 커패시터 DC-DC 변환기를 제안하였다. 기존의 스위치드 커패시터는 면적이 작고 저렴하지만, 효율적인 전압변환을 하는 입력전압의 범위가 좁고 다중출력의 경우 면적이 커지고 전력효율이 낮아진다. 제안된 스위치드 커패시터 DC-DC 변환기는 입력전압에 따라 커패시터 어레이 구조를 변경하여 최적의 효율을 갖는 입력 범위를 증가시켰다. 그리고 두 개의 스위치 어레이를 공유함으로써 스위치와 커패시터 수를 32개에서 25개로 줄였다. 제안된 변환기는 $0.18{\mu}m$ CMOS 공정에서 제작하였다. 시뮬레이션 결과 입력전압 범위는 0.7~1.8V이고, 최대 전력 효율은 90%이며, 칩의 면적은 $0.255mm^2$이다. In this paper, a small areal dual-output SC(switched capacitor) DC-DC converter with a improved range of an input voltage is presented. The conventional SC DC-DC converter has an advantage of low cost and small chip area. But, it has a narrow input voltage range to convert efficiently. Also, it has a lager chip area and a lower power efficiency from multiple outputs. The proposed SC DC-DC converter improves the power efficiency by using the capacitor array structure which efficiently converts the voltage according to the input voltage. By sharing two switch array, it reduces the number of switches and capacitors from 32 to 25. The proposed SC DC-DC converter was manufactured in a $0.18{\mu}m$ CMOS process. In the simulation, the range of the input voltage is 0.7~ 1.8V, the max. power efficiency is 90%, and the chip area is $0.255mm^2$.
황선광(S. K. Hwang),백현무(H. M. Baek),주호선(H. S. Joo),김신회(S. H. Kim),임용택(Y. T. Im),손일헌(I. H. Son),배철민(C. M. Bae) 한국소성가공학회 2013 한국소성가공학회 학술대회 논문집 Vol.2013 No.10
In this work, a multi-pass continuous hybrid (CH) process is designed and its practicality is investigated for manufacturing high performing low-carbon steel wires in a continuous way. For this purpose, the multi-pass CH process was experimentally set up and applied up to five passes with route A at room temperature and was compared with those for the multi-pass wire drawing(WD) process. According to the present investigation, the grain-refined wires, which have many well defined high angle grain boundaries, with the enhanced ultimate tensile strength and comparable ductility were successfully produced by the five-pass CH process compared to the WD process. In addition, the fatigue limit of the specimen produced by the CH process was enhanced due to the grain-refined microstructure of the specimen compared to the one of the WD process. Based on these observations, it was found that the multi-pass CH process can effectively produce a fine-grained wire with enhanced mechanical properties compared to the WD process.
Study on the Calculation of Conversion Factors for Effective Dose for Chest Digital Radiography
이종웅,황선광,원도연,정재은 한국방사선학회 2016 한국방사선학회 학술대회 논문집 Vol.2016 No.1
흉부 디지털 방사선 검사는 방사선 촬영빈도에서 41 %, 흡수선량은 약 15 % 의 비중을 차지한다. 디지털 방사선장비는 환자가 받는 흡수선량을 대략적으로 표시하기 위해 면적선량을 제공한다. 그러나 면적선량은 ICRP에서 권고하는 유효선량과 단위가 달라 대략적인 피폭선량을 유추하기 어렵다. 면적선량에 따른 유효선량을 측정하기 위해서는 Monte Carlo 전산모사를 이용하여 복잡한 시뮬레이션과정을 통하여 계산할 수 있다. 본 연구에서는 면적선량과 유효선량의 상관관계를 분석하여 변환상수를 도출하였다. 변환상수를 이용하여 ICRP에서 권고하는 유효선량을 직관적으로 비교하여 의료피폭선량의 저감화를 유도하고자 한다. 디지털 흉부 팬텀인 “Duke” QC chest phantom (07-646 QC, Supertech, Elkhart, USA)을 대상으로 Chest PA 검사에 대해 FOV를 43 X 43 Cm, SID를 180 cm로 실험하였다. 필립스 장비의 적정 노출지수인 200 ~ 800사이의 면적선량을 측정하기 위해 관전압을 81kV ~ 125kV로 고정하고 mAs와 부가필터를 변화하여 실험하였다. PCXMC 2.0 Monte Carlo 전산모사를 통하여 유효선량을 측정하고 시뮬레이션한 유효선량 값과 면적선량 값의 상관관계를 분석하여 관전압과 부가여과필터에 따른 변환상수(Conversion Factor : CF)를 도출하였다. 디지털 방사선환경에서 영상의 화질과 피폭선량은 비례관계이다. 디지털 방사선 장비의 넓은 노출지수는 적은 선량으로 영상의 화질저하 없이 검사가 가능하다. CF는 환자가 받는 피폭선량을 직관적으로 파악하기 위한 매우 간단하면서 유용한 값이다. 디지털 방사선 검사시 CF를 이용하여 환자피폭관리 프로그램을 개발함으로써 환자가 받는 피폭 선량을 체계적으로 관리하는 시스템을 구현할 수 있을 것이다.