http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마그네시아 인산염 시멘트를 사용한 초속경 보수모르타르의 기초적 특성분석에 관한 연구
강인석,안무영,백민수,임남기,문장수,정상진 대한건축학회 2007 大韓建築學會論文集 : 構造系 Vol.23 No.8
Building structures are generally large in size and have a long life, and the construction of such structures requires the investment of a huge amount of money and social infrastructure. Furthermore, building structures are closely related to people's life.Recently, however, the rapid development of society has been worsening air pollution, which is in turn accelerating the degradation of building structures. Thus, the safety of building structure is emerging as a critical issue.To cope with this problem, the government enacted "The Special Act on Safety Control for Infrastructure” but we need engineers' higher concern over the maintenance and reinforcement of existing structures. Recently researches are being made actively on repair mortar using ultra rapid hardening cement for recovering the performance of structures.The present study conducted an experiment on the basic physical properties of ultra rapid hardening mortar for repairing and reinforcing building structures using magnesia cement and mono-ammonium phosphate. In the experiment, we changed the water-cement ratio and carried out replacement at different ratio of MAP/MgO(%). We used retarder to have working life, and made comparative analysis through evaluating working life and fluidity and measuring strength by age.
주제분류코드에 의한 국내외 건설사업관리(CM) 기술 분야별 연구 현황분석
강인석,박호병,김민지,문현석,Kang, Leen-Seok,Park, Ho-Byung,Kim, Min-Ji,Moon, Hyoun-Seok 한국건설관리학회 2010 한국건설관리학회 논문집 Vol.11 No.1
건설사업관리(Construction Management, CM)제도의 적용확대와 함께 관련 학계 및 연구계에서도 CM의 세부분야별로 활발한 연구들을 진행하고 있으며, 다양한 연구 성과물들이 양산되고 있다. 지속적인 CM연구의 활성화를 위해서는 최근 국내외 연구 주제들의 동향을 파악하는 것이 중요하며, 이로써 국내외의 취약 연구 분야와 관련 기술을 유추할 수 있다. 본 연구는 CM의 주요 기술 분야별 주제분류 코드체계를 구성하여 각 주제별로 최근 5년간 2,000여편의 국내외 관련 논문을 대상으로 세부 분야별 연구동향을 분석하고 있다. 분석결과 국내외 CM연구 분야별 강점 및 취약분야와 최근의 연도별 연구동향 추이를 파악할 수 있었으며, 이를 바탕으로 CM분야의 연구 활성화를 위한 추진방향을 제시하고 있다. Recently, the application of construction management system is being increased and various research activities by each specific field are going on many universities and research institutes. It is necessary to understand the latest research trends by each subject for keeping up excellent products in CM field. This study suggests a subject breakdown structure for classifying detailed technologies of CM field. And over 2,000 domestic and international papers in the last five years are analyzed for analogizing research trends by each subject. The analyzed results include research trends by year and strong and weak fields by each research subject of CM technology. Finally, this study suggests an improved countermeasure for guaranteeing sustainable research activation in CM field.
전기도금법을 이용한 FCCL용 구리박막 제조시 레벨러의 영향 연구
강인석,구연수,이재호,Kang, In-Seok,Koo, Yeon-Soo,Lee, Jae-Ho 한국마이크로전자및패키징학회 2012 마이크로전자 및 패키징학회지 Vol.19 No.2
최근에 전자 산업 분야에서 장치의 고용량을 구현 하기 위해 구동 drive IC의 선폭은 좁아지고 집적도는 증가하고 있다. 이러한 반도체, 전자 산업 분야의 초소형화, 고밀도화에 따라 FCCL(Flexible Copper Clad Laminate)의 표면 품질이 더욱 중요해 지고 있다. FCCL의 표면 결함으로는 돌기, 스크레치, 덴트 등이 있다. 특히 돌기가 표면에 존재할 경우 후속 공정에서 쇼트와 같은 불량을 유발할 수 있으며, 제품의 품질 저하를 야기 시킬 수 있다. 하지만 표면에 돌기가 존재한다 하더라도, 전해액의 레벨링 특성이 우수하다면 돌기의 성장을 막을 수 있다.평탄하고, 결함이 없는 도금표면을 얻기 위해서는 첨가제의 역할이 필수적이다. 평탄한 구리 표면을 형성하기 위해서 stock solution에 가속제, 억제제, 레벨러를 첨가하였다. 레벨러를 첨가하는 이유는 평탄한 표면을 얻고, 돌기의 형성을 억제하기 위함이다. 구리도금 표면 형상을 향상시키기 위한 레벨러로는 SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone)가 사용되었다. 도금 첨가제와 도금 조건의 변화를 통해 도금시레벨링 특성을 향상시키고, 레벨링 특성 측정을 위해 니켈 인공돌기를 제작 한 후 레벨링 특성을 측정하였다. In recent days, the wire width of IC is narrowed and the degree of integration of IC is increased to obtain the higher capacity of the devices in electronic industry. And then the surface quality of FCCL(Flexible Copper Clad Laminate) became increasingly important. Surface defects on FCCL are bump, scratch, dent and so on. In particular, bumps cause low reliability of the products. Even though there are bumps on the surface, if leveling characteristic of plating solution is good, it does not develop significant bump. In this study, the leveling characteristics of additives are investigated. The objective of study is to improve the leveling characteristic and reduce the surface step through additives and plating conditions. The additives in the electrodeposition bath are critical to obtain flat surface and free of defects. In order to form flat copper surface, accelerator, suppressor and leveler are added to the stock solution. The reason for the addition of leveler is planarization surface and inhibition of the formation of micro-bump. Levelers (SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone) are used in copper plating solution to enhance the morphology of electroplated copper. In this study, the nucleation and growth behavior of copper with variation of additives are studied. The leveling characteristics are analyzed on artificially fabricated Ni bumps.
건설공사 4D 캐드시스템의 일정 및 진도관리기능 개발 사례
강인석 대한건축학회 2006 大韓建築學會論文集 : 構造系 Vol.22 No.8
The practical application and research activities of 4D CAD system for visualizing construction schedule information are being increased by the practical use of IT tools in construction management(CM) field. The IT tools in CM can be used for real time management and visualized information management. 4D CAD system is a representative tool for visualizing schedule information management. This study develops an improved methodology and 4D tool to organize 4D object for construction schedule management and progress control. And a new management technology to control schedule information by each WBS level is included in the study and the suggested method is verified by the developed system. It may be expected that those functions can raise the applicability of 4D system by verifying the interfering activities and identifying the priority of each activity.