2010 해남, 평창, 원주지역 갈대 등 야초류의 이용실태와 사료가치 평가

서성(Sung Seo),한대덕(Dae Duk Han),장선식(Sun Sik Jang),김원호(Won Ho Kim),정민웅(Min Woong Jung),최진혁(Jin Hyuck Choi),김진숙(Jin Sook Kim),김하영(Ha Young Kim),이종경(Joung Kyong Lee) 한국초지조사료학회 2012 한국초지조사료학회지 Vol.32 No.1

본 연구는 부존 조사료자원 이용으로 수입사료를 줄이고 사료비를 절감하고자 2010년도에 전남 해남(간척지), 강원 평창(강변), 원주(섬강변), 전남 영광(와탄강변) 등 4개 지역에서 갈대와 억새 등 야초 자생지를 탐색하고, 수확·이용실태 조사와 함께 사료가치를 분석하였다. 전남 해남 해남목장 내 갈대(Phragmites communis) 위주의 야초 자생지는 300 ha로 예년에는 2회 곤포작업하여 연간 사일리지로 2,300~2,500톤(ha당 8톤)을 생산하였으나 2010년도는 1회 곤포조제로 사일리지 2,000톤(ha당 7톤)을 생산하였다. 유통가격은 롤 당 53천원으로 ㎏당 110원이었다. 곤포는 전량 자가소비하며, 외부 작업단에 롤 당 26천원의 작업비를 지불하였다. 연간 조수입은 2억 2,260만원이며, 소득은 1억원 수준(345천원/ha)이었다. 초장 150 ㎝의 갈대는 조단백질 8.4%, 상대사료가치 71.9 (건초 5등급), 건물 소화율 60.1%로 사료가치는 볏짚에 비해 약간 나은 것으로 평가되었다. 갈대 사일리지의 사료가치와 유기산 함량은 동일 지역에서 동일한 재료로 사일리지를 조제하더라도 수확시기에 따라 차이가 컸으며(CP 4.7~6.4%, RFV 62.2~78.9, 건물 소화율 41.9~53.9%), 갈대 사일리지의 품질은 수단그라스에 비해 불량하였다. 강원 평창 강변 자생갈대의 사료가치는 초장이 79, 117, 121, 142㎝로 생육이 진행됨에 따라 낮아져, 조단백질은 각각 13.9%에서 7.6%로, 상대사료가치는 90.7 (건초 3등급)에서 76.1 (건초 4등급)로, 건물 소화율은 72.9%에서 54.7%로 감소하였다. 원주 섬강 주변 야초류는 곤포수확 작업에 어려움이 있었으며, 초장 130 cm의 갈대는 조단백질 8.5%, 상대사료가치 82.3 (건초 4등급), 건물 소화율 70.2%로 사료가치는 높았으며, 220㎝의 성숙한 갈대는 조단백질 10.2%, 상대사료가치 65.1 (건초 5등급), 건물 소화율 48.9%로 볏짚 대비 조금 나은 것으로 평가되었다. 전남영광지역에서는 와탄천 주변에 자생하는 갈대를 수거 이용하고자 시도하였으나 경제성이 없어 중단하였다. 이상의 결과를 종합하여볼 때, 갈대, 억새 등 야초류는 현 상태에서 최대한 수거·이용하되, 사료가치를 유지하고 가축 기호성이 양호한 시기에 수확하는 것이 중요하며, 최소한 볏짚과 비슷하거나 그 이상의 사료가치를 기대하기 위해서는 7월 중순 이전(늦어도 7월까지)에 수확·이용하는 것이 권장된다. This study was carried out in 2010 to investigate the utilization and forage quality of native grasses, such as Phragmites communis which might reduce the cost of feeding domestic cattle. The regions surveyed were the Haenam ranch in Haenam, Pyeongchang, Wonju, and Yeonggwang. In Haenam, yearly silage production harvested from 300 ha was 2,000 MT (7 MT/ha). All of those round bale silages were self-consumed in that region, and marketing price was 50,000 55,000 won per roll (110 won/㎏). Phragmites communis of 150 ㎝ in length contained 8.4% crude protein (CP) with relative feed value (RFV) 71.9 and 60.1% in vitro dry matter digestibility (IVDMD), which was somewhat more favorable than forage quality of rice straw. The silage quality of Phragmites communis varied greatly by the time of harvest (CP 4.7 6.4%, RFV 62.2 78.9, and IVDMD 41.9 53.9%), even with the same district and of the same original forage materials. Generally, the quality of Phragmites communis silage of was poorer than that of sorghum * sudangrass hybrid. In Pyeongchang, forage quality of Phragmites communis was decreased from 13.9% to 7.6% in CP, 90.7 to 76.1 in RFV, and 72.9% to 54.7% in IVDMD, as plant was getting mature, from 79 ㎝ to 117 ㎝, 121 ㎝ or to 142 ㎝ in length. In Wonju, the quality values of Phragmites communis of 130 ㎝ in length were 8.5% CP, 82.3 RFV and 70.2% IVDMD, while those of matured grasses of 220 ㎝ in length were lower (10.2% CP, 65.1 RFV and 48.9% IVDMD), but this was a little more favorable than quality of rice straw. In Yeonggwang, feeding Phragmites communis was tried in a Hanwoo feed, but stopped due to low profitability. In conclusion, the overall quality of most native grasses including Phragmites communis in this survey was poor. Therefore, we recommend that Phragmites communis and native grasses should be harvested on June or July to obtain richer forage quality in forage values than rice straw.

우리나라 노인여성의 골다공증성 척추골절로 인한 경제적 부담 추계

강혜영,강대룡,장영화,박성은,최원정,문성환,양규현,Kang, Hye-Young,Kang, Dae-Ryong,Jang, Young-Hwa,Park, Sung-Eun,Choi, Won-Jung,Moon, Seong-Hwan,Yang, Kyu-Hyun 대한예방의학회 2008 예방의학회지 Vol.41 No.5

Objectives : To estimate the economic burden of osteoporotic vertebral fracture (VF) from a societal perspective. Methods : From 2002 to 2004, we identified all National Health Insurance claims records for women ${\geq}50$ years old with a diagnosis of VF. The first 6-months was defined as a "clearance period," such that patients were considered as incident cases if their first claim of fracture was recorded after June 30, 2002. We only included patients with ${\geq}$ one claim of a diagnosis of, or prescription for, osteoporosis over 3 years. For each patient, we cumulated the claims amount for the first visit and for the follow-up treatments for 1 year. The hospital charge data from 4 hospitals were investigated to measure the proportion of the non-covered services. Face-to-face interviews were conducted with 106 patients from the 4 study sites to measure the out-of-pocket spending outside of hospitals. Results : During 2.5 years, 131,453 VF patients were identified. The patients had an average of 3.38 visits, 0.40 admissions and 6.36 inpatient days. The per capita cost was 1,909,690 Won: 71.5% for direct medical costs, 20.6% for direct non-medical costs and 7.9% for indirect costs. The per capita cost increased with increasing age: 1,848,078 Won for those aged 50-64, 2,084,846 Won for 65-74, 2,129,530 Won for 75-84and 2,121,492 Won for those above 84. Conclusions : Exploring the economic burden of osteoporotic VF is expected to motivate to adopt effective treatment options for osteoporosis in order to prevent the incidence of fracture and the consequent costs.

색상 측정 기기를 이용한 복합레진 적층 수복과 단일 수복의 색상 비교 분석

송영상,김자현,이빈나,장지현,장훈상,황윤찬,오원만,황인남 大韓齒科保存學會 2012 Restorative Dentistry & Endodontics Vol.37 No.2

Objectives: This study analyzed the difference in color caused by different thickness in enamel layer of composite resins when applied with single and layering placement technique, and evaluated if the results agreed with the shade guide from the manufacturers to verify reliability of the color matching process of the manufacturers. Materials and Methods: For single composite resin samples, 6 mm diameter and 4 mm thickness cylindrical samples were fabricated using Ceram-X mono (DENTSPLY DeTrey) and CIE L*a*b* values were measured with spectrophotometer. Same process was done for layering compositie resin samples, making 3 dentinal shade samples, 4 mm thickness, for each shade using Ceram-X duo (DENTSPLY DeTrey) and enamel shade resins were layered in 2 mm thickness and CIE L*a*b* values were measured. These samples were ground to 0.2 mm thickness each time, and CIE L*a*b* values were measured to 1 mm thickness of enamel shade resin. Results: Color difference (△E*) between single and layering composite resin was 1.37 minimum and 10.53 maximum when layering thicknesses were between 1 mm and 2 mm and 6 out of 10 same shade groups suggested by manufacturer showed remarkable color difference at anythickness (△E* > 3.3). Conclusion: When using Ceram-X mono and duo for composite resin restoration, following the manufacturer's instructions for chossing the shade is not appropriate, and more accurate information for Ceram-X duo is needed on the variation and expression of the shades depending on the thickness of the enamel. (Restor Dent Endod 2012;37(2):84-89)

디지털 설계를 위한 작은 크기와 4bit(LSB) 오차를 가진 10비트 감마(γ)시스템 설계

장원우,김현식,이성목,김인규,강봉순 東亞大學校附設 淸報技術硏究所 2006 情報技術硏究所論文誌 Vol.13 No.2

이 논문에서, 제시된 감마(r)라인 시스템은 해당 공식에 의해 만들어진 비선형 감마 곡선과 하드웨어로 구현된 결과 사이의 오차를 최소화하기 위해 만들어 졌다. 제시된 알고리즘과 시스템은 특정 감마값이 2.2, 즉 {0,1}^(2.2)에 의해 생성되는 공식과 입, 출력 데이터 크기가 10bit를 기반으로 한다. 오차를 최소화하기 위해, 시스템은 데이터 점들 사이를 지나 적합한 다항식을 만드는 수치해석 방법, 최소 자승 다항식을 사용하였다. 제한된 감마 라인은, 정밀도를 높이기 위해, 서로 각각의 중첩된 범위를 가지는 2차 다항식 9개로 구성되어 있다. MATLAB^(TM)7.0으로 검증된 알고리즘을 바탕으로, 제한된 시스템은 Verilog-HDL으로 구현되었다. 시스템은 2 클럭 지연을 가지며 1 클럭마다 결과가 생성된다. 오차 범위 (LSB)는 -4에서 +3이다. 표준편차는 1.287956238을 가진다. 시스템의 전체 게이트 값은 2,083이며, 최대 타이밍은 15.56[ns] 이다.

Nortriptyline 청소율과 Metoprolol 산화대사능과의 상관관계

정원석,장인진,이경훈,신상구,우종인,박찬웅 大韓臨床藥理學會 1993 臨床藥理學會誌 Vol.1 No.2

난소 절제 백서에서 17β-Estradiol 투여가 골조직에 미치는 영향

장원석,김종렬,박봉수,성일용 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.4

This study was focused on the changes of mineral density and histopathologic features of osseous tissue when ovariectomized rats were administered with 17β-Estradiol. Forty-eight rats, 11 weeks of age, were divided into four groups, which are a normal control group, an ovariectomized control group, an experimental group 1 which was given 17β-estradiol immediately after the ovariectomy and an experimental group 2 which was given 17β-Estradiol 3 weeks after the ovariectomy. They were sacrificed at different time intervals (1, 3, 4 and 8 weeks) for histopathologic observation, histo-morphometric analysis and immunohistochemistry with fibronectin and CD34 antibody. Most rats showed the increase in bone density, which was the least in the ovariectomized control group. In histopathologic features of both the mandible and the tibia, the osteoclasts in bone marrow increased in the ovariectomized control group of more than 3 weeks. In histomorphometric analysis, the osteoclasts increased in both the mandible and the tibia in length of time. In comparison of the increase of osteoclast between four groups, it decreased as following order: the ovariectomized control group, the expermiental group 2 the experimental group 1, the normal control group. Especially the experimental group 1 and experimental group 2 at 4 weeks showed remarkable changes both in the mandible and in the tibia in comparison with the ovariectomized control group. In immunohistochemical anaylsis with fibronectin, the more week-ovariectomized control groups of both the mandible and the tibia showed weaker fibronectin expression in osteoblast and bone marrow. Among the experimental group 1 and 2, 4-week group showed the strongest expression. In immunohistochemical analysis with CD34, the mandible showed generally weak expression but 8-week experimental group 1 and 2 showed relatively moderate expression in osteoblast and bone marrow. In case of the same groups of tibia, 4-week group show the strongest expression. With all these results, it is assumed that 17β-Estradiol has more effect on the development and differentiation of osteoclasts than those of osteoblasts and contributes to the initial bone formation most efficiently by inhibiting osteoclastic action and stimulating osteoblasts.

개선된 입력성형 기법을 이용한 XY스테이지의 고속 정밀 위치결정

장준원,박상원,홍성욱 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-

This paper deals with precise positioning of high-speed XY stage by an improved input shaping. Input shaping is well known to be a very effective tool for suppressing the residual vibration of flexible structures. However, the ordinary input shaping cannot suppress the residual vibration at the target position effectively. The main reason is the time delay of the servo system. In order to compensate for the time-delay-caused-problem, this paper proposes an improved input shaper, The improved input shaper is proved effective through experiments.

수용성 키틴이 백서 창상치유에 미치는 영향

강장석,조용남,정상훈,유 결,임진수,권 호,조용우,고석원 大韓成形外科學會 2001 Archives of Plastic Surgery Vol.28 No.1

複合 組織鋼의 引張性質에 미치는 組織學的 因子에 관하여

成章鉉,韓元澤 동아대학교 공과대학 부설 한국자원개발연구소 1984 硏究報告 Vol.8 No.1

Morphological factors affecting tensile properties were investigated by metallography, tensile test and particle analysis after manufacturing Austenite Dual Phase steel (ADP steel) and Intercritical Dual Phase steel(IDP steel) by heat treatment of Fe-Mn and Fe-Mn-Cr systems. 1) The formation of austenite was largely affected by initial structures before intercritical annealing, and austenite grew from the pearlite colony in Fe-Mn system but grew discontinuously along the plate of cementite in Fe-Mn-Cr system. 2) As for the effects of Cr on the tensile properties, tensile strength and elongation are low for step quenching, but tensile strength increased and elongation decreased slightly for intercritical annealing. 3) In Fe-Mn-Cr system tensile strength and elongation of IDP steel were excellent than those of ADP steel due to the discontinuous dispersion of fine martensite particles at the same volume fraction.

환자안전 인식 향상을 위한 의과대학생 대상 환자안전 역할극 교육의 효과

이원,표지희,장승경,최은영,옥민수,조민우,이상일 건강보험심사평가원 2021 HIRA RESEARCH Vol.1 No.1

.