http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저전력 다기능 센서시스템 코어 셀 A/D Converter
최규훈 대한전자공학회 2004 電子工學會論文誌 IE (Industry electronics) Vol.41 No.02
This paper has proposed a 4- bit 20MHz Flash A/D converter design available analog signal processing and realized its intergrated circuit. The core chip was fabricated by Hynix 0.35㎛ CMOS process. The parallel comparison method A/D converter quantized analog signals swiftly using various converters. Also this theme has designed economic power dissipation circuit using a preamplifier of low volt & power CMOS comparator. And the core cell ADC is usable to develop multi-functional sensor system for numerous application control sector. 이 논문은 아날로그 신호처리용 집적회로 구현을 위한 4-비트 20MHz Flash A/D 콘버터를 제안하였다. 이 칩은 Hynix 0.35㎛ CMOS process 공정으로 제조되었다. A/D 콘버터 병렬비교 방식은 다양한 변환기를 이용하여 빠르게 아날로그 신호를 양자화 하였다. 또한 이 연구는 저전압 및 저전력 CMOS 비교기 프리앰프를 이용하여 경제적으로 전력소모를 최소화 하였다. 그리고 이 ADC 코어셀은 여러 가지 응용 제어 선택을 위한 다기능 센서 시스템 개발에 유용하다.
음성인식을 위한 Dynamic Time Warp 소자의 설계
최규훈,김종민 한국통신학회 1994 韓國通信學會論文誌 Vol.19 No.3
음성 인식에서의 dynamic time warp (DTW)은 반복적 계산을 필요로 하며, 이 계산을 수행하기에 합당한 PE cell의 설계는 매우 중요하다. 따라서 이 연구에서는 실시간 어휘 인식을 가능하게 하는 대사전 규모의 대어휘 고립단어인식용 DTW알고리즘을 하드웨어로 구현하기위한 PE(Processing Element)소자의 설계에 주안점을 두었다. 이 DTW용 PE 소자를 크게 세가지의 블록으로 대별된다. 즉, “MIN" block, "ADD" block 그리고 ”ABS" block인데, “MIN"은 축적 최소거리를 계산하기 위한 블록이고, ”ADD"는 이들 최소거리들의 합을 계산하는 블록, 그리고 “ABS"는 이러한 합에 의한 국부거리를 절대값을 구하기 위한 블록이다. 본 연구에서는 이들 세가지 전체 블록회로의 설계 및 검증을 행하였으며, 1.2 m CMOS N-well 설계 규칙에 EK라 전체블록에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다. Dynamic Time Warp(DTW) needs for iterative calculations and the design of PE cell suitable for the operations is very important. Accordingly, this paper aims at real time recognition design enables large dictionary hardware realization using DTW algorithm. The DTW PE cell separated into three large blocks. "MIN" is the one block for counting accumulated minimum distance. "ADD" block calculates these minimum distances, and "ABS" seeks for the absolute values to the total sum of local distances. Circuit design and verification about the three block have been accomplished, and performed layout '||'&'||' DRC(design rule check) using 1.2 m CMOS N-Well rule base.CMOS N-Well rule base.
개선된 연속시간 Fully-Differential 전류모드 적분기를 이용한 3V CMOS 저역필터 설계
최규훈,방준호,조성익 한국통신학회 1997 韓國通信學會論文誌 Vol.22 No.4
In this paper, a new CMOS continuous-time fully-differential current-mode integrator is proposed as a basic building block of the low-voltage high frequency current-mode active filter. The proposed integrator is composed of the CMOS complementary circuit which can extend transconductance of an integrator. Therefore, the unity gain frequency which is determined by a small-signal transconductance and a MOSFET gate capacitance can be expanded by the complementary transconductance of the proposed integrator. And also the magnitude of pole and zero are increased. The unity gain frequency of the proposed integrator is increased about two times larger than that of the conventional continuous-time fully-differential integrator with NMOS-gm. These results are verified by the small signal analysis and the SPICE simulation. As an application circuit of the proposed fully-differential current-mode integrator, the three-pole Chebyshev lowpass filter is designed using 0.8.$\mu$m CMOS processing parameters. SPICE simulation predicts a 3-dB bandwidth of 148MHz and power dissipation of 4.3mW/pole for the three-pole filter with 3-V power supply.
최규훈,Choi Kyu-Hoon 한국공학교육학회 2000 공학교육연구 Vol.3 No.1
현대는 시스템화되고 융합화되어가는 시대이다. 시스템이 다른 시스템과 모여 융합되고, 이들이 다시 커다란 형태의 시스템으로 융합되어 다시금 하나의 거대한 시스템이 되곤 한다. 전자소자는 개별소자시대를 지나 소자들이 융합되어 시스템으로 통합되는가 하면 반도체집적화로 시스템화되고 있다. 이 연구는 전자공학 2년제 교육과정을 시대에 따라 시스템 및 반도체 설계 특성화의 방향으로 모듈화하고 학제간의 유기적인 융합을 고려하여 재구성하였다. 이 교육과정은 다학기제의 모듈화 모델로 개발하여 산학연계 현장교육 및 심화교육 등을 가능토록 개발하였다. Modern times are called 'the system and fusion era'. One system has been compounded with the other system repeatedly, and the new systems form a great mixed system again and again. Discrete electronic devices have been integrated as one semiconductor system and have been unified as a great mixed system frequently. This study proposes a module based 2-year college electronic engineering curriculum focused on system and integrated circuit design. This curriculum is devised to be suitable for the industrial environment, especially in the school-industry cooperation, and is recomposed to promote the organic union of interdisciplinary courses. The newly designed course has been developed as a multi semester module model which enables a practical field training and in-depth study.