http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
급성 장골동맥 폐색으로 인한 급성 하지 허혈 환자의 일차적 스텐트 삽입술
정기찬,신태범,최호철,최혜영,김지은,정성훈 대한영상의학회 2009 대한영상의학회지 Vol.60 No.1
Purpose: To assess the efficacy of stent-assisted recanalization for the management of acute limb ischemia (ALI) after a failed surgical revascularization in patients with acute iliac arterial occlusion and considered unfit for a thrombolysis. Materials and Methods: The data on 6 patients with acute limb ischemia due to iliac arterial occlusion, and treated with stent implantation between November 2005 and March 2008, was analyzed retrospectively. The reasons for ALI in the patients analyzed included acute thrombosis related to a traumatic injury (n=3), acute in-situ thrombosis with pre-existing atherosclerotic stenosis (n=2), and cardiogenic embolism (n=1). A preprocedural CT angiography and conventional angiography revealed an occlusion at the iliac artery. This study examined the clinical data, technical and clinical outcome of the procedure, and complications related to the procedure or follow-up period for each patient. Results: Primary stenting was technically successful in all patients, thus resulting in the reduction or elimination of clinical symptoms in the 5 patients observed. One patient expired due to multi-organ failure related to a reperfusion injury. The other five patients showed good clinical results without symptom recurrence and normal duplex USG or CT angiographic findings during the 3-15 month follow-up period. Conclusion: A stent-assisted recanalization is an effective treatment for patients with ALI, which are considered unfit for thrombolysis and surgical recanalization. 목적: 급성 장골동맥 폐색 환자 중 혈전용해술의 적응증이 되지 않거나 수술적 재개통술에 실패한 환자에서 급성 하지 허혈의 치료를 위한 일차적 스텐트 삽입술의 유용성에 대해 알아보고자 하였다. 대상과 방법: 2005년 11월에서 2008년 3월까지 스텐트 삽입술을 시행한 6명의 급성 장골동맥 폐색 환자를 대상으로 하였다. 장골동맥 폐색의 원인은 외상과 관련된 급성 혈전증( n=3), 죽상경화증에 의한 협착 부위의 급성 혈전증( n=2), 심인성 색전증( n=1) 이었다. 시술 전 CT 혈관조영술과 고식적 혈관조영술을 시행하여 장골동맥의 폐색을 확인하였다. 본 연구에서는 환자의 임상 양상, 시술 결과 및 관련된 합병증, 추적관찰 기간에 발생한 합병증에 대해 알아보았다. 결과: 모든 환자에서 일차적 스텐트 삽입술은 성공적으로 시행되었으며, 시술 후 즉각적인 혈류의 재개통이 있었다. 5명의 환자는 임상 증상이 호전되었으나, 1명의 환자는 재관류 손상 때문에 사망하였다. 1-15개월 동안 초음파 및 CT 혈관조영술을 이용하여 추적관찰 중인 5명의 환자에서 병변 혹은 증상의 재발은 발생하지 않았다. 결론: 혈전용해술의 적응증이 되지 않거나 수술적 재개통술에 실패한 급성 하지 허혈을 동반한 급성 장골동맥 폐색 환자에서 일차적 스텐트 삽입술을 통한 혈관의 재개통술은 효과적인 치료 방법으로 생각된다.
가변구조 모델링을 위한 확장된 DEVS 모델링 및 시뮬레이션 방법론
정기찬,이종근,이장세,지승도 한국시뮬레이션학회 1999 한국시뮬레이션학회 논문지 Vol.8 No.4
The major objective of this research is to design and build the variable structure DEVS modeling & simulation framework. To do this, we have proposed the direct message passing mechanism between the model and its simulator to deal with the structural demand from the model during the simulation. In this approach, four types of basic messages are introduced for the vertical(creation/deletion of the child) and horizontal(creation/deletion of the brother) structural changes. Proposed methodology has been successfully applied to the multi-processor system and the forest fire information system.
염수 주입 및 피복두께를 고려한 RC 시편의 반전위 평가
정기찬 ( Jeong Gi-chan ),윤용식 ( Yoon Yong-sik ),김윤식 ( Kim Yun-shik ),박선경 ( Park Sun-kyung ),권성준 ( Kwon Seung-jun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 3가지 수준의 피복두께, 염수농도를 고려하여 반전위를 측정하였다. 측정한 결과 피복두께가 증가함에 따라 부식 전위가 높게 나타났다. 염수농도 0%의 경우 부식이 발생하지 않은 것으로 판단되며 3.5%와 7%의 경우에는 부식이 발생한 것으로 판단된다. 염수 주입 농도의 변화에 따른 반전위 거동은 뚜렷하게 나타났다. 이는 추가적인 모니터링 결과와 시편의 해체를 통한 실제 부식량과의 상관성 분석을 통해 모니터링 결과의 신뢰도가 향상될 것으로 보인다.
습윤 상태에서의 반전위를 이용한 철근 부식과 영향 인자 간의 상관성 분석
정기찬(Gi-Chan Jeong),권성준(Seung-Jun Kwon) 한국건설순환자원학회 2021 한국건설순환자원학회 논문집 Vol.9 No.2
본 연구에서는 3가지 수준의 물-시멘트 비, 상부 주입 염수 농도, 피복두께를 고려하여 반전위값과 영향인자들 간의 상관성을 분석하였다. 피복두께가 증가할수록 반전위값이 증가(+ 방향 : 부식 억제)하여 부식 저항성이 증가하는 것을 확인할 수 있었으며 평가 기준에 따르면 피복두께 60mm를 갖는 시편의 경우 비교적 부식이 적게 일어난 것으로 판단된다. 이는 피복두께가 외부 열화인자에 대한 효과적인 방어기구로서 작용한 것이 원인으로 사료된다. 상부 주입 염수 농도가 0%인 경우 모든 경우에서 부식이 발생하지 않는 것으로 판단되지만, 염수 농도 3.5% 및 7.0%의 경우 부식이 진전된 것으로 판단된다. 비교적 높은 단위 결합재량이 확보된 배합에서 부식 저감에 유리한 모니터링 결과가 도출되었으며, 부식 영향인자와 반전위값 간의 상관성을 평가하고자 다중 회귀분석을 수행하였다. 해당 예측식의 결정계수는 0.97로 매우 높은 수준으로 나타났지만 사용한 표본의 수가 제한적이고 특정 시점의 결과만이 이용된 한계점이 존재하였다. 추가적인 모니터링 수행 및 시편 해체 후 관련 데이터의 상관성 분석을 통해 더욱 합리적인 예측식의 도출이 가능해 질 것으로 사료된다. In this study, the correlation between the influencing factors on corrosion and Half Cell Potential(HCP) measurement was analyzed considering the three levels of W/C ratio, cover depth, and chloride concentration. The HCP increased with enlarged cover depth, so it was confirmed that the increment of cover depth was effective for control of corrosion. Based on the criteria, the case of 60mm cover depth showed excellent corrosion control with under –200mV, indicating increase of cover depth is an effective method for reducing intrusion of external deterioration factors. When fresh water was injected to the upper part of specimens, very low level of HCP was monitored, but in the case that concentrations of chloride were 3.5% and 7.0%, HCP dropped under -200mV. In addition, the case with high volume of unit binder showed lower HCP measurement like increasing cover depth. Multiple regression analysis was performed to evaluate the correlation between the corrosive influence factors and HCP results, showing high coefficient of determination of 0.97. However, there were limitations such as limited number of samples and measuring period. Through the additional corrosion monitoring and chloride content evaluation after dismantling the specimen, more reasonable prediction can be achieved for correlation analysis with relevant data.
장기 부식 모니터링을 통한 RC 구조의 반 전위 평가 및 부식 영향인자 분석
정기찬 ( Jeong Gi-chan ),윤용식 ( Yoon Yong-sik ),권성준 ( Kwon Seung-jun ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.1
본 연구에서는 반 전위 측정을 통해 RC 구조의 장기 부식 모니터링을 수행하였다. 모니터링 수행 시 상부에 존치된 염수의 건습 반복 조건을 통해 보강재의 부식을 촉진시켰으며 시험 변수로서 3가지 수준의 물-시멘트 비 (40 %, 50 %, 60 %), 상부 주입 염수의 염화물 농도(0 %, 3.5 %, 7 %) 및 피복 깊이(30 mm, 45 mm, 60 mm)를 고려하였다. 또한 부식 모니터링 개시 1년 6개월 경과 후 RC 시편을 해체하여 피복두께에서의 염화물 함류량 평가를 수행하였으며 반 전위와의 상관성을 분석하였다.
가변구조 모델링을 위한 확장된 DEVS 모델링 및 시뮬레이션 방법론
정기찬(Ki-Chan Jung),이장세(Jang-Se Lee),이종근(Jong-Keun Lee),지승도(Sung-Do Chi) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1B
본 연구는 Zeigler가 제시한 DEVS 모델링 및 시뮬레이션 환경이 갖는 고정구조를 가변구조로 확장시킬 수 있는 가변구조 시뮬레이터의 설계방법 및 구현을 주목적으로 한다. 이를 위하여 본 연구에서는 네 개의 기본적인 가변구조 연산자(child-creation, child-deletion, brother-creation, brother-deletion)를 제안함으로써 모델구조상의 수평적 및 수직적 가변구조를 달성하였다. 이를 통하여 구현된 가변구조 DEVS-C++는 초기의 시뮬레이션 모델 구조로부터 시뮬레이션 진행 중에 요구되는 모델들의 생성과 소멸의 동적인 변화에 보다 효율적으로 대처할 수 있는 시뮬레이션 가변 구조 모델을 지원함으로써 시공간적 변화가 요구되는 격자형 공간 모델링이나 모델의 생성과 소멸이 빈번한 인공생명 시스템 모델링 등에 있어 설계상의 효율성과 유연성을 제공할 수 있다.