http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
굴착으로 인한 응력전이효과를 고려한 터널의 지반이완하중 평가
이재국,김정주,Hafeezur Rehman,유한규 사단법인 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.6
터널 굴착에 따라 발생하는 지반이완하중은 이론식, 경험식 및 수치해석적 방법에 의해 산정할 수 있다. 이론식 및 경험식에 의한 방법은 지반조건, 터널형상, 그리고 시공조건을 고려할 수 없다. 그러나 수치해석적인 방법은 터널 굴착으로인해 발생하는 굴착면 주변의 변위와 응력 분석이 가능하며, 지반조건 및 시공조건을 고려한 지반이완하중 산정이 가능하다. 터널 굴착면 주변에 발생하는 응력전이효과를 파악할 수 있는 최대주응력과 최소주응력과의 차이와 최대주응력에대한 비로서 응력전이비(e)를 제시하였다. 이 결과를 이용하여 터널 굴착에 따른 굴착면 주변에서의 이격된 거리에 따라발생하는 주응력 차이에 의한 지반이완 영역을 확인할 수 있었다. 또한, 지반등급별 변화와 응력전이비(e) 변화에 따른수치해석을 실시하여 지반이완하중 값의 차이를 확인할 수 있었다. 본 연구의 방법과 기존의 지반이완하중 산정 결과와비교한 결과, 응력전이효과(e = 10%)를 고려한 결과값이 한계변형률을 이용한 방법보다는 지반이완하중이 다소 크게나타났으나 대체로 이론식 및 경험식 보다는 작게 나타났다. 따라서 응력전이효과를 고려한 지반이완하중 산정은 실제지반조건과 터널 시공조건을 고려한 것으로 콘크리트라이닝 설계에 적용 가능한 방법이 될 것으로 판단된다. Theoretical, empirical and numerical methods are used to evaluate the rock load due to tunnelling. Theoretical and empirical methods do not consider ground conditions, tunnel shape, and construction conditions. However, through numerical analysis, it is possible to analyze the displacement and stresses around tunnel due to its excavation, and evaluate the rock load considering ground and construction conditions. The stress transfer ratio(e) which is defined as a ratio of the difference between the major and minor principal stresses to major principal stress is used in order to understand the stress transfer effect around the tunnel excavation using numerical analysis results. The loosend area around tunnel periphery was found based on this approach. The difference of rock load from stress transfer effect were found according to the ground grade. From comparison, rock load obtained from stress transfer effect (e = 10%) were somewhat larger than the results obtained from the critical strain method, but smaller than those obtained from theoretical and empirical methods. The stress transfer effect approach considers the ground condition, tunnel shape; therefore, it can be applied to evaluate the rock load in concrete lining design.
비정형 건축 구현을 위한 디지털 디자인 프로세스에 관한 연구
이재국,이강복 한국디지털건축·인테리어학회 2011 한국디지털건축인테리어학회 논문집 Vol.11 No.2
Starting in modern times by Le Corbusier, architectures made by concretes are still developing in these times. For several decades, the shape of box architecture has been the most familiar type of buildings. Of course “The concrete is the type of box building” isn’t always right, but what we have most seen was the buildings which has been stylized and made by concretes. Through modern times to these days based on international style and functionalism, the type of box building was the most effective and good profit type of architecture which has not disregarded the capitalism. Free-form building are becoming a common place, and many of these are designed and constructed using sophisticated techniques. The main technique being used is Generative Technology of Form for free-form construction. People’s interest is growing in this, and it is becoming widely used both abroad and domestically. The purpose of this paper is to investigate the use of Generative Technology of Form which is a digitally adapted design methodology in architecture. The digital design process used for contemporary buildings share many typical features that exist within a standard digital template, but also an increasing amount of mass customization that has to be produced at an additional cost. This paper will summarize these features in terms of free-form architecture, and in terms of the digital design process. In fact, 3D models have to be conceded as main design products considering features of Free Form Design Architecture. However it is practical to design twice over, because all forms of architectural drawings are 2D. From now on, design of Free Form Design Building is not to separate between design process and practical process, but to compound them as unified design system applied the process to communicate information interactively. For this, it should be required to impose unified digital design process and perform researches about effective way to apply in the field of Free-form Design Architecture.
이재국,민영기 한국디지털건축·인테리어학회 2014 한국디지털건축인테리어학회 논문집 Vol.14 No.1
This study investigated the existing housing through the design process for applying BIM design proposed the decision-making process. Create a checklist of BIM work problems and improve the design, so that we can reduce the time and workload required to support consultations between officials and housing design shall be utilized in the design process. First, the layout plan of the arrangement of buildings, parking and outdoor space planning, access and circulation plan, layout plan of the factors that affect natural conditions, restrictions inside the building, circulation of pedestrians and vehicles in outer space was investigated. Second, the flat plan of activities, taking into account the size of the unit was to examine the space, and how to care for the disabled and the implications discussed. Third, the elevation plan and cross-sectional height of the building, the structure was examined, ceiling height, ceiling finishes, floor finishing, finishing materials, windows, roof form was studied. BIM modeling is an important physical property, verifying the functional characteristics of the integration process in the digital environment, and wanted to associate to the construction process. In this process, BIM model data is extracted from the images and videos that the tablet PC as a Client Review was to visualize the shape of the building, the simulation was able to speed decision-making.