들뢰즈와 가타리의 리좀적 탈주 표현 연구 - 송하영 회화·오브제작품을 중심으로 -

송하영 국제문화기술진흥원 2021 The Journal of the Convergence on Culture Technolo Vol.7 No.4

연구자의 작품에 투영되어 있는 탈주체의 형상과 속성, 그리고 탈주 방식 등을 들뢰즈와 가타리가 사회 변혁의 방식으로 제시한 리좀적 사유에 연결시켜 살펴보고, 그것이 사회적으로 어떠한 의미를 내포하고 있는지 밝혀보았다. 연구자의 작품에 투영된 탈주체는 어떤 완성체가 아니며 언제나 변화와 생성을 전제하고 있는 질료와 같은 것이다. 이 탈주체는 유·무의식적 욕망이 존재한다. 이 욕망은 들뢰즈와 가타리가 모순된 사회 변화를 추구하는 등의 긍정적 속성을 지닌 생성의 욕망이다. 탈주체에 이 욕망을 배치하게 되면 탈주을 감행한다. 이 탈주 방식은 들뢰즈와 가타리 가 제시한 리좀적이다. 이것은 모순된 것을 해체하고, 외부와의 연결·접속과 단절을 반복하면서 새로운 질서를 생성한 다. 작품에 등장하는 리좀적 탈주체는 반복적 붓질을 한 색면과 결합된 오브제를 가변 설치하여 탈주하는 과정과 방 식을 추상적으로 표현한 것이다. 이 작품에서 탈주하는 탈주체들의 목표는 존재자들의 가치와 자유롭고 창조적인 삶 을 인정하는 공간으로 안전하게 착륙하는 것이다. 이 탈주체들은 드넓은 초원을 유동하면서 끊임없이 새로운 풍경을 생성하는 노마드이며, 모순된 사회에 저항하는 예술가, 문학가, 즉 들뢰즈와 가타리가 사회 변혁의 개념으로 제시한 전쟁기계와 거리의 열정을 만들며 새로운 가치와 정치를 창안·창조하는 니체의 아곤 개념과 연결된다. 이들이 추구하 는 것은 기존 질서를 완전 해체하는 것이 아니며, 타자성을 인정하는 가운데 공존할 수 있는 공간을 희망한다. This study set out to investigate the forms, attributes, and escape methods of post-subjects projected on the investigator's works in connection with rhizomatic thinking proposed as a way of social transformation by Deleuze and Guattari and examine their social connotations. Post-subjects projected on the investigator's works are not completed wholes of some sort, but like materials whose constant premise is change and creation. In the investigator's works, post-subjects have conscious and unconscious desire. It is the desire of creation with positive attributes including Deleuze's and Guattari's pursuit of changes in a contradicting society. When desire is deployed in post-subjects, they will carry out an escape. This way of escape is rhizomatic proposed by Deleuze and Guattari. It deconstructs contradicting things and repeats connection, contact, and severance with the outside world, building a new order. Rhizomatic post-subjects appearing in the investigator's works depict the escape process and method in abstract ways through the variable installation of objets combined with a color field of repeating brushes. In this work, the goal of post-subjects is to make a safe landing in a space where beings are recognized for their values and free and creative lives. These post-subjects are nomads creating a new landscape continuously, wandering around vast plains, and also artists and literary figures resisting a contradicting society. That is, they are connected to the concept of a war machine proposed by Deleuze and Guattari as a concept of social transformation and to the concept of Nietzsche's Agon to devise and create new values and politics based on street passion. They seek after a space where they can co-exist with otherness recognized rather than the complete deconstruction of the old order.

A Design of Jacquard Woven Textile Electrode to Monitor the Electrical Activity of the Heart for Smart Clothing

송하영,이주현,Song, Ha-Young,Lee, Joo-Hyeon Korea Fashion and Costume Design Association 2010 한국의상디자인학회지 Vol.12 No.2

오늘날 인간의 수명이 연장되고, 웰빙과 건강에 대한 관심이 증가됨에 따라서 언제 어디서나 건강을 모니터링 할 수 있는 건강 스마트 의류 시스템이 개발되고 있다. 이를 위하여 최근에는 생체신호의 모니터링이 가능하도록 디자인된 의류에 통합된 형태의 직물 전극이 개발되고 있다. 혁신적으로 의류 시스템에 통합되어 착용 가능한 니트, 우븐, 자수방식의 텍스타일 전극에 대한 다양한 연구가 개발 제시되고 있으며, 이의 일부는 상용화되어 있다. 이에 본 연구는 경위사의 일정한 직조제어 자동화 시스템이 가능한 컴퓨터 자카드 직기의 캐드(CAD) 직조디자인 방식을 통하여 생체신호 센싱 기능이 향상된 새로운 텍스타일 전극디자인을 연구하고자 하였다. 이를 위하여 본 연구에서는 기존 생체신호 센싱 전극의 개발 및 연구 동향, 비직물/전극 타입에 대한 단점과 장점에 대한 비교 분석을 이론적으로 살펴보고, 자카드 직조 직물 기반으로 심전도 센싱용 텍스타일 전극을 디자인하여 실험 연구하였다. 자카드 직조 방식의 심전도 센싱용 직물 전극은 전극 인터페이스 디자인 방식, 이중직물형 직조 디자인 방식, 사가공 등의 요인들을 고려하여 개발하였다. 본 연구에서 도출된 최종 자카드 직조 직물 기반의 텍스타일 전극은 스마트 의류에 통합시킨 텍스타일 전극 모듈로서 적용되여 향후 상용화 방안을 모색할 수 있다.

Design of Illuminating Car Seats based on Woven Fabric of Optical Fiber

송하영,조하경 한국감성과학회 2014 감성과학 Vol.17 No.1

In recent days, according as ergonomics and aesthetic engineering are important factors in the product market, there is a demand to develop automobile seat and interior designs which are focused on sensitive elements such as aesthetic and comfort features in order to satisfy the sensitive needs of consumers. To meet such demands, car seats are turning into functional and sensitive products that reflect elements of function and entertainment. According to such trends, this research is aimed to develop the illuminating car seat fabric that serve such functions as recognizing and reacting tocar environments, which includes sensing over-speed, open doors, and unfastened safety belts through the illuminating car seat fabrics by optical fiber. For this purpose, basic physical properties of optical fiber are analyzed, appropriate weaving and etching technologies are applied, and the woven fabric of optical fiber for car seats are illuminating depend upon car environments. Moreover, the applicable woven fabric of optical fiber is deduced after evaluating the physical properties (such as tensile strength, heatproof, anti-fouling, washable and combustible traits) for the appropriateness of applying the woven fabric of optical fiber to car seats. For this purpose, the woven fabric of optical fiber is covered according to car seat processes; the optical fiber applied to seats is composed that it may be connected to one end of the connector linked to a LED so that it may perform functions like sensing over-speed, open doors, and unfastened safety belts; the sensed signals are transmitted to the control part, and luminescent signals are transmitted to LED.

建築設計를 위한 施工決定 支援시스템의 開發

宋河永 大田産業大學校 1996 한밭대학교 논문집 Vol.13 No.1

In the several years, traditional building consruction has changed due to the complexity and the variety of building systems and construction methods Particularly, in Korea, the investigation of constructibility and thd improvement of porductivity are coming up very important issues in the construction industry also since it has been difficult to have the skilled labors at job site in accordance with the change of social structure and labor markets. Therefore, the construction organizations keep taking steps to carry out new project management systems and early construction decision making support systems in the building product process. The objective of this study is to generate a fundamental structure of construction decision support system about construction time and cost for the decision making of design. This paper also describes a method to develop the model system which will be able to provide the activity duration and cost estimate as the basic data for a evaluation of design alternative.

베이스콘크리트의 施工軟度에 따른 流動化 콘크리트의 施工性 및 工學的 特性에 관한 實驗的 硏究

宋河永 大田工業大學 1992 한밭대학교 논문집 Vol.9 No.1

The objective of this report is to investigate and analyze the influence of the different base concrete in consistency for the good production of superplasticized concrete (SPC) on the basis of the experimental results. The principal conclusions are summarized as follows. 1. SPC exhibited only slight bleeding in both cases of low and medium consistency of the base concrete, compared to the conventional concrete. 2. SPC lost slump and flow value at a much faster rate than the conventional concrete with an equivalent water/cement ratio and initial consistency. 3. The compressive strength of SPC was found to be higher than that of base and conventional concrete, and the case of base concrete with medium consistency showed a little more increment than low consistency.

감성적인 이미지를 적용한 가습기디자인사례

송하영,형성은,홍정표 한국감성과학회 2011 춘계학술대회 Vol.2011 No.-

SLS 방식의 3D 프린팅 기술을 활용한 직물구조적인 디자인설계 연구 -유연성 있는 직조구조 직물설계를 중심으로-

송하영 한국패션비즈니스학회 2019 패션 비즈니스 Vol.23 No.3

Since the early 2000s, various fashion design products that use 3D printing technology have constantly been introduced to the fashion industry. However, given the nature of 3D printing technology, the flexible characteristics of material of textile fabrics is yet to be achieved. The aim of this study is to develop the optimal design conditions for production of flexible and elastic 3D printing fabric structure based on plain weave, which is the basic structure in fabric weaving using SLS 3D printing technology. As a the result this study aims to utilize appropriate design conditions as basic data for future study of flexible fashion product design such as textile material. Weaving structural design using 3D printing is based on the basic plain weave, and the warp & weft thickness of 4mm, 3mm, 2mm, 1.5mm, 1mm, and 0.7mm as expressed in Rhino 6.0 CAD software program for making a 3D model of size 1800mm x 180mm each. The completed 3D digital design work was then applied to the EOS SLS Machine through Maker ware, a program for 3D printer output, using polyamide 12 material which has a rigid durability strength, and the final results obtained through bending flexibility tests. In conclusion, when designing the fabric structure design in 3D printing using SLS method through application of polyamide 12 material, the thickness of 1 mm presented the optimal condition in order to design a durable digital textile structure with flexibility and elasticity of the 3D printing result.

정리와 정리요소에 관한 연구

송하영,홍정표 한국감성과학회 2011 추계학술대회 Vol.2011 No.-

도전사를 적용한 자카드 직물전극의 체온 측정에 관한 연구

송하영 한국감성과학회 2016 추계학술대회 Vol.2016 No.-

양명학파의 형성과 그 전개

송하영 한국유교학회 1992 유교사상문화연구 Vol.5 No.-

N/A N/A