http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배성근,권성우,김세원,차수원,Bae, Sung Geun,Gwon, Seong Woo,Kim, Se Won,Cha, Soo Won 대한토목학회 2014 대한토목학회논문집 Vol.34 No.3
최근 국내에서는 원유 정제과정에서 많은 양의 부생황이 발생하고 있다. 유황콘크리트는 시멘트 풀을 유황개질 바인더로 대체한 콘크리트로서 시멘트 제조시에 대량으로 발생되는 $CO_2$의 저감 및 원유 정제산업에서 부생되는 황을 활용할 수 있는 이점이 있다. 또한 유황콘크리트는 반복해서 재활용할 수 있는 친환경적이고 지속가능한 재료이다. 이 연구에서는 개질유황 바인더를 사용한 유황콘크리트의 물리적 특성을 실험을 통하여 검토하였다. 실험 결과, 유황콘크리트는 대체적으로 50~80MPa 이상의 고강도 특성을 보였다. 단위질량, 탄성계수 및 인장강도는 포틀랜드 시멘트 콘크리트(PCC)와 유사하였다. 순환굵은골재를 유황콘크리트에 적용하는 경우 순환골재의 단점을 보완하는 동시에 고강도콘크리트 제조가 가능하다. 유황콘크리트의 열팽창계수는 PCC보다 다소 큰 값으로 나타내고 있으나, 채움재를 혼입하여 일반 콘크리트 수준의 열팽창계수를 보이는 것으로 나타났다. Recently, a huge amount of sulfur has been produced as a byproduct of petroleum refining processes in Korea. Sulfur concrete is made of modified sulfur binder instead of cement paste, which has advantages of reducing $CO_2$ emission from cement industry as well as utilizing surplus sulfur. Also, sulfur concrete is a sustainable material that can be repetitively recycled. In this study, the physical properties of sulfur concrete are experimentally investigated. From the test results, sulfur concrete showed compressive strengths higher than at least 50MPa. Also, the unit weight, modulus of elasticity and splitting tensile strength of sulfur concrete was similar to that of Portland cement concrete (PCC). The coefficient of thermal expansion of sulfur concrete was a little larger than that of Portland cement concrete and sulfur concrete with mineral filler is helpful to lower the coefficient of thermal expansion. recycled aggregate sulfur concrete resulted in a slight reduction in the compressive strength, but sulfur concrete with recycled aggregate can achieve the high strength characteristics.
양막이식술을 이용한 군날개 제거술에서 마이토마이신 C의 효과
배성근,김정규,이진기,박대진,Sung Geun Bae,Jeong Kyu Kim,Jin Ki Lee,Dae Jin Park 대한안과학회 2012 대한안과학회지 Vol.53 No.2
Purpose: To compare postoperative recurrence rates of pterygium surgery with amniotic membrane transplantation with and without mitomycin C. Methods: A retrospective analysis of 45 eyes of 43 patients who underwent pterygium surgery with amniotic membrane transplantation with a minimum of six months of follow-up. Nineteen eyes underwent mitomycin C application, while the remaining 26 eyes did not. Recurrence rates and complications were evaluated. Results: With a minimum of six months of follow-up, fibrovascular tissue in the excised area not invading the cornea (conjunctival recurrence) was noted in two eyes (10.5%), and fibrovascular tissue invading the cornea (corneal recurrence) was noted in one eye (5.4%) in the amniotic membrane transplantation with mitomycin C group. Conjunctival recurrence was noted in six eyes (23.1%) and corneal recurrence in three eyes (11.5%) in the amniotic membrane transplantation without mitomycin C group. Recurrence rate in the amniotic membrane transplantation with mitomycin C group (15.9%) was significantly lower (p = 0.014) than that in the amniotic membrane transplantation without mitomycin C group (34.6%). Complications included sub-amniotic membrane hemorrhage in two eyes, granuloma in one eye, and wound dehiscence in one eye in each group. There were no specific complications related to usage of mitomycin C. Conclusions: In pterygium surgery with amniotic membrane transplantation, application of mitomycin C is an effective method to reduce recurrence rates, especially conjunctival recurrences that are related to cosmetic problems. This method may also be helpful to reduce patient discomfort. J Korean Ophthalmol Soc 2012;53(2):200-207
정량적 단층촬영을 이용한 고관절의 골밀도 측정시 대퇴부의 회전에 의한 측정값의 변화에 관한 연구
배성근(Seong Keun Bae),조영호(Young Ho Cho),서범석(Beom Seok Suh) 대한CT영상기술학회 2012 대한CT영상기술학회지 Vol.14 No.1
목적 QCT를 이용한 고관절 검사시 대퇴부의 회전(Rotation)에 의한 BMD(g/cm²)와 T-Score, Z-Score의 값의 변화를 측정하고 이를 토대로 QCT(Hip) 검사시 최적의 검사 자세를 취하여 측정값의 객관성과 신뢰성을 유지하고자 본 저자 등은 연구를 하게 되었다. 대상 및 방법 2010년 8월부터 2011년 1월까지 QCT 검사를 시행한 정상 성인 남성 40명을 대상으로 하였다. CT장비는 128-channel detector의 사용이 가능한 Somtom Definition AS(Siemens Healthcare, Forchheim, Germany)를 사용 하였고 Scan 조건은 120kVp, 100mAs로 CARE Dose 4D는 사용하지 않았다. 검사방법은 대퇴부의 자세를 4가지 Group으로 나누어 자연자세(Neutral rotation, Group 1), 내전자세(Interal rotationl 15°, 30°, full interal rotation, Group 2,3,4)로 Geometric Measurement를 이용하여 오른쪽 대퇴부의 Neck, Trochanter, Intertrochanter 부위에 관심영역을 설정하고, femoral neck axis angel:30degress, femoral neck width:30mm, fn ROI height:10mm의 동일한 측정조건으로 BMD와 T-score, Z-score를 비교 분석하고 이에 따른 고관절 장축(Hip Axis Length)의 길이 변화에 대해 측정을 하였다. 결과 BMD의 경우 Group 4(0.805g/cm²)와 Group 1(0.738g/cm²)이 약 0.067g/cm²의 측정값의 차이가 나타났고, T-score는 Group 1(-1.59)과 Group 3(-1.19)의 경우 약 0.4정도의 차이를 보였으며 Z-score의 경우는 Group 3(-1.24)과 Group 4(-1.14)는 약 0.1정도의 측정값의 차이를 보였다. 결론 본 연구의 QCT(Hip) 검사시 피검사자의 대퇴부의 회전에 의한 BMD와 T-score, Z-score 값의 토대로 하여 대퇴부의 자세를 자연자세에서 내선자세로 변화를 주었을 경우 고관절 장축의 길이의 연관성으로 인해 측정 값에 변화를 주는 것으로 사료가 된다. 피검사자의 대퇴부의 회전을 방지하고 고관절 장축의 길이가 가장 크게 나오는 내전자세를 취함으로서 QCT 검사시 골밀도 측정에 있어 객관성과 신뢰성에 도움이 되리라 사료가 된다. I. Purpose On hip-joint examination using the QCT, we have measured the change of the value of the BMD(g/cm²) and T-score, Z-score by the femoral region rotation, and that is based on the best position for maintaining objectivity and confidence of the measured value. II. Materials and method Targets are 40men who are performed QCT from 2010 in August to 2011 in January. The CT equipment was used with 128-channel detector Somatom Definition AS. (Siemens Healthcare, Forchheim, Germany) The scan condition lets 120 kVp and 100mAs, not CARE Dose 4D. The method is that we set region of interest in Neck, Trochanter, Intertrochanter of the right femoral region with Geometric Measurement. We classify the femoral region position for 4 groups; Neutral rotation Group1 and internal rotational 15°, 30°, full, Group 2,3,4. In addition, with the same condition which is femoral neck axis angel: -30degress, femoral neck width: 30 mm, fn ROI height: 10 mm, we have done analyzed the BMD, T-score and Z-score and measured the change of the Hip Axis Length. III. Results As BMD, group 4 is 0.805 g/cm² and group 1 is 0.738 g/cm² that the gap is about 0.067 y/cm². And T-score, the difference between group 1(-1.59) and group 3(-1.19) is about 0.4. Besides, Z-score between group 3(-1.24) and group 4(-1.14) is approximately 0.1. IV. Conclusions When we have performed QCT(Hip), by use of the value of the BMD, T-score and Z-score by the rotation of the femoral region, the conclusion is considered that the measured value is changed by associations of Hip Axis Length if the position of the femoral region moves from neutral rotation-position to internal rotation-position. As positioning internal rotational 15° that prevents the patients1 femoral region-rotation and makes Hip Axis Length longer, we think it helps the BMD-measurements of the QCT.