http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채널 등화기를 내장한 2.0GS/s 5비트 전류 모드 ADC 기반 수신기
문종호,정우철,김진태,권기원,전영현,전정훈,Moon, Jong-Ho,Jung, Woo-Chul,Kim, Jin-Tae,Kwon, Kee-Won,Jun, Young-Hyun,Chun, Jung-Hoon 대한전자공학회 2012 전자공학회논문지 Vol.50 No.8
본 논문에서는 고속 직렬 링크에 사용할 수 있는 5비트 2.0GS/s 2-way time interleaved 파이프라인 ADC 기반의 수신기를 소개한다. 샘플링 주파수를 높이기 위해, ADC 각 단은 트랙킹과 증폭이 동시에 수행되는 전류 모드 구조를 사용하였다. 또한 ADC 각단에 1-tap FIR 등화기를 탑재하여 별도의 디지털 후처리 없이 채널의 ISI를 감소시켰다. 제안한 수신기는 110nm 공정을 사용하여 설계하였다. 메모리를 제외한 수신기는 $0.58{\times}0.42mm^2$의 크기를 갖고, 동작전압 1.2V에서 91mW의 전력을 소모한다. 시뮬레이션 결과 2.0GS/s 샘플링 주파수에서 20MHz의 입력 주파수와 Nyquist 주파수인 1.0GHz 입력신호에 대하여 동일하게 26.0dB의 SNDR과 4.0비트의 ENOB특성을 확보하였다. In this paper, a 5-bit 2-GS/s 2-way time interleaved pipeline ADC for high-speed serial link receiver is demonstrated. Implemented as a current-mode amplifier, the stage ADC simultaneously processes the tracking and residue amplification to achieve higher sampling rate. In addition, each stage incorporates a built-in 1-tap FIR equalizer, reducing inter-symbol-interference (ISI)without an extra digital post-processing. The ADC is designed in a 110nm CMOS technology. It comsumes 91mW from a 1.2-V supply. The area excluding the memory block is $0.58{\times}0.42mm^2$. Simulation results show that when equalizer is enabled, the ADC achieves SNDR of 25.2dB and ENOB of 3.9bits at 2.0GS/s sample rate for a Nyquist input signal. When the equalizer is disengaged, SNDR is 26.0dB for 20MHz-1.0GHz input signal, and the ENOB of 4.0bits.
고온 고압 조건하의 기포유동층 반응기에서의 입자 마모특성
문종호,이동호,류호정,박영철,이종섭,민병무,진경태 한국청정기술학회 2014 청정기술 Vol.20 No.4
Attrition characteristics of PKM1-SU particles, CO2 absorbents for pre-combustion CO2 capture process, and FCCparticles, catalytic particles for hydro cracking of crude oil, were investigated at high temperature and high pressure conditions. Particle attrition tests were executed at various kinds of temperature (0-400 ℃) and pressure (0-20 bar) conditions in a cylindertype bubbling fluidized bed with 15.1 cm diameter, 120 cm height and 1 mm orifice-sparger tube. Attrited particles before andafter tests were analyzed by BET, optical microscopy, and particle size analyzer. Effects of bed material height (solid inventory)and steam injection were also verified by using ASTM D5757-95, conventional attrition test method. 연소전 CO2 흡수제인 PKM1-SU와 원유의 접촉분해 촉매인 FCC (fluid catalytic cracking)입자의 고온, 고압 조건 마모 실험을 수행하였다. 지름 15.1 cm, 높이 120 cm에 스파저 튜브(sparger tube, 1 mm 오리피스)를 장착한 원통형 기포유동층반응기를 이용하여, 다양한 온도조건(0~400 ℃), 압력조건(0~20 bar)에서 입자마모 실험을 수행하였다. BET, 광학현미경, 입도분석기 등을 이용하여 실험 전, 후 입자를 분석 하였다. 또한 기존의 마모도 측정 방법인 ASTM D5757-95방법을 이용하여 층물질의 높이(4.4~10.2 cm) 및 수분 주입이 입자 마모에 미치는 영향에 대하여 확인하였다.
문종호,최현종 대한소화기내시경학회 2013 Clinical Endoscopy Vol.46 No.5
Advantages of direct peroral cholangioscopy (POC) using an ultraslim endoscope include use of conventional endoscopy equipment, operation by a single endoscopist, and superior image quality of the biliary tree with easy application of enhanced endoscopy and a large working channel. The major diagnostic indications of this system are an evaluation of biliary strictures, filling defects, or unclear findings on cholangiogram or other imaging studies. Therapeutic application using a direct POC system can be broadened by a larger working channel. However, direct POC is difficult to apply in patients with a narrow diameter bile duct, far distal common bile duct lesion, or failed anchoring of the scope with accessories. An air embolism is a rare complication of direct POC but can be a fatal problem. Cholangitis can also occur during or after the procedure. Use of a CO2 system instead of room air during the POC procedure and administration of antibiotics before and after the procedure are strongly recommended. Continuous development of specialized endoscopes and accessories is expected to facilitate the diagnostic and therapeutic roles of direct POC.