치악산 편마암 복합체에 분포하는 지하수 내 함유된 방사성 원소의 기원: 주변 지질을 구성하는 광물과의 연관성을 중심으로

김형규,이상우,김순오,정도환,김문수,김현구,정종옥,Kim, Hyeong-Gyu,Lee, Sang-Woo,Kim, Soon-Oh,Jeong, Do-Hwan,Kim, Moon-Su,Kim, Hyun-Koo,Jeong, Jong Ok 한국암석학회한국광물학회 2022 광물과 암석 (J.Miner.Soc.Korea) Vol.35 No.2

치악산 편마암복합체에서 방사성원소를 포함하고 있는 광물을 파악하고, 주변 지하수에 포함되어 있는 방사선원소(우라늄)와의 연관성을 확인하고자 암석학적 및 광물 화학 분석을 수행하였다. 현미경 및 전자현미경 분석 결과, 주 구성광물은 사장석, 흑운모, 석영, 알칼리장석, 녹니석 그리고 방해석이며, 부수광물은 스펜, 갈렴석, 인회석, 저어콘, 토라이트, 티탄철석, 황철석 그리고 방연석 등 총 14종을 확인하였다. 토라이트의 경우 거정의 갈렴석 내 ~1 mm의 크기로 소량 관찰된다. 희토류 원소를 많이 포함하고 있는 갈렴석은 각기 다른 3 가지 산출양상을 보인다. EPMA 분석 결과, 거정의 갈렴석에서는 TiO₂~1.70 wt.%, Ce₂O₃~11.86 wt.%, FeO~13.31 wt.%, MgO~0.90 wt.% 그리고 ThO₂~1.06 wt.% 원소들의 함량이 높게 나타나며, Al₂O₃ 17.35 ± 2.15 wt.% (n = 7), CaO 12.13 ± 1.81 wt.% (n = 7) 평균 함량이 가장 낮은 값을 보인다. 티탄철석을 둘러싸고 있는 스펜 집합체의 가장자리에 존재하는 갈렴석은 Al₂O₃~24.00 wt.%, Nd₂O₃~5.10 wt.%, Sm₂O₃~0.66 wt.%, Dy₂O₃~0.86 wt.% 그리고 Y₂O₃~1.38 wt.% 원소들의 함량이 높게 나타나며, TiO₂ 0.35 ± 0.21 wt.% (n = 11), Ce₂O₃ 5.25 ± 1.03 wt.% (n = 11), FeO 9.84 ± 0.26 wt.% (n = 11), MgO 0.12 ± 0.05 wt.% (n = 11) 그리고 La₂O₃ 1.49 ± 0.29 wt.% (n = 11) 등과 같이 평균 함량이 가장 낮은 값을 보인다. 모암의 기질부에서 관찰되는 갈렴석의 화학성분은 앞서 설명한 갈렴석의 중간 정도의 값을 가진다. 연구대상인 치악산 편마암복합체 내 미그마타이트질 편마암에는 주목할 만큼의 우라늄 함량을 가지는 광물이 발견되지는 않았다. 따라서 지하수에서 나타나는 우라늄의 기원과 주변 지질과의 연관성을 명확하게 밝혀내지는 못했다. 하지만 방사성 원소인 토륨 원소 및 희토류 원소를 다량 포함하는 갈렴석이 풍부하게 존재하는 것이 이번 연구결과로 확인되었다.

음영기복 알고리즘을 활용한 한반도 촬영 위성영상에서의 지형그림자 탐지

김형규,임중빈,김경민,원명수,김태정,Hyeong-Gyu Kim,Joongbin Lim,Kyoung-Min Kim,Myoungsoo Won,Taejung Kim 대한원격탐사학회 2023 大韓遠隔探査學會誌 Vol.39 No.5

In recent years, the number of users has been increasing with the rapid development of earth observation satellites. In response, the Committee on Earth Observation Satellites (CEOS) has been striving to provide user-friendly satellite images by introducing the concept of Analysis Ready Data (ARD) and defining its requirements as CEOS ARD for Land (CARD4L). In ARD, a mask called an Unusable Data Mask (UDM), identifying unnecessary pixels for land analysis, should be provided with a satellite image. UDMs include clouds, cloud shadows, terrain shadows, etc. Terrain shadows are generated in mountainous terrain with large terrain relief, and these areas cause errors in analysis due to their low radiation intensity. previous research on terrain shadow detection focused on detecting terrain shadow pixels to correct terrain shadows. However, this should be replaced by the terrain correction method. Therefore, there is a need to expand the purpose of terrain shadow detection. In this study, to utilize CAS500-4 for forest and agriculture analysis, we extended the scope of the terrain shadow detection to shaded areas. This paper aims to analyze the potential for terrain shadow detection to make a terrain shadow mask for South and North Korea. To detect terrain shadows, we used a Hill-shade algorithm that utilizes the position of the sun and a surface's derivatives, such as slope and aspect. Using RapidEye images with a spatial resolution of 5 meters and Sentinel-2 images with a spatial resolution of 10 meters over the Korean Peninsula, the optimal threshold for shadow determination was confirmed by comparing them with the ground truth. The optimal threshold was used to perform terrain shadow detection, and the results were analyzed. As a qualitative result, it was confirmed that the shape was similar to the ground truth as a whole. In addition, it was confirmed that most of the F1 scores were between 0.8 and 0.94 for all images tested. Based on the results of this study, it was confirmed that automatic terrain shadow detection was well performed throughout the Korean Peninsula.

Improvement and Verification of the Wear Volume Calculation

김형규,이용호,Kim, Hyung-Kyu,Lee, Young-Ho Korean Tribology Society 2005 KSTLE International Journal Vol.6 No.1

A technique for a wear volume calculation is improved and verified in this research. The wear profile data measured by a surface roughness tester is used. The present technique uses a data flattening, the FFT and the windowing procedure, which is used for a general signal processing. The measured value of an average roughness of an unworn surfnce is used for the baseline of the integration for the volume calculation. The improvements from the previous technique are the procedures of the data flattening and the determination of a baseline. It is found that the flattening procedure efnciently manipulates the raw data when the levels of it are not horizontal, which enables us to calculate the volume reasonably well and readily. By comparing it with the weight loss method by using artificial dents, the present method reveals more volume by aroung 3~10%. It is attributed to the protruded region of the specimen and the inaccuracy and data averaging during the weght loss measurement. From a thorough investigation, it is concluded that the present technique can provide an accurate wear volume.

심부전(心不全)의 원인(原因) 및 증후(症候)에 관(關)한 문헌적(文獻的) 고찰(考察)

김형규,조기호,이원철,김영석,배형섭,이경섭,구본홍,Kim, Hyong-Kyue,Jo, Ki-Ho,Lee, Won-Chol,Kim, Yong-Seok,Bhae, Hyung-Sup,Lee, Kyung-Sup,Goo, Bon-Hong 대한한방내과학회 1990 大韓韓方內科學會誌 Vol.11 No.1

According to the research, the Estern and Western medical literatural records about the causes and symptoms of the heart failure, the results as follows are concluded. 1. The asthma, suceptibility to fright and severe palpitation are generally revealed from the left heart failure. The causes of it are belong to the Yang and Yeum deficiency which are mainly caused by primordial energy deficiency. 2. The symtoms of asthma which are derived from left heart failure are related to the gasping that contain dyspnea, asthma due to the accumulation of phlegm and severe palpitation and related to shortness of breath due to fluid retention (水喘) that make asthma. 3. In the right heart failure, the edema which is derived from the congestion of vein, is revealed as stoppage of main channel that is mainly caused by the Yang or the Yeum deficiency. 4. The edema which is caused by the right heart failure, is mainly related to the symptoms of Yeum type edema, also it is related to the five viscera-fluid, moreover to the heart-fluid (心水), lung-fluid (肺水) and liver-fluid (肝水). 5. In heart failure, the pathologic symptoms which are derived from the stoppage of blood circulation, are phlegm-retention disease (痰飮), diffuse fluid-retention syndrom (溢飮), fluid-retention syndrome characterized by dyspnea and edema (支飮).

MEK - 물 공비 혼합물의 공비증류에 관한 이론적 연구

김형규,이정석,한춘,나병기,정연수,송형근 ( Hyung Kyu Kim,Jung Seok Yi,Choon Han,Byung Ki Na,Yon Soo Chung,Hyung Keun Song ) 한국화학공학회 1995 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.33 No.2

MEK(methyl ethyl ketone) cannot be separated from water by normal distillation because of the presence of minimum boiling azeotrope. However it can be separated by azeotropic distillation by adding entrainer. The best entrainer was selected by considering the ratio between infinite dilute activity coefficients of each component for suggested entrainers and relative volatilities. From this method, acetone was selected as the best entrainer for the MEK-Water system. When the distillation tower was simulated by the UNIFAC equilibrium model for this MEK-Water-Acetone system, the minimum reflux ratio was observed as 0.6. Also, the optimum feed-plate was calculated at each reflux ratio for various amounts of entrainer. Results indicated the number of ideal plates decreases with the amount of entrainer. As the best results, 13 ideal plates were required to obtain 95 mole% of MEK as the bottom product from 70 mole% of MEK of the MEK-Water solution when the reflux ratio and the ratio of entrainer to feed were 0.85 and 2, respectively. In this case, the optimum feed-plate location, which required the minimum number of ideal plates, was the eighth.

DEA를 이용한 교통사고 잦은 곳 개선사업 효율성 측정방안 연구

김형규,이수범,엄대룡,원동욱,신소명,Kim, Hyung Kyu,Lee, Soo Beom,Eom, Dae Lyoung,Won, Dong Uk,Shin, So Myoung 한국안전학회 2017 한국안전학회지 Vol.32 No.5

Over the past 30 years, the business effects of the improvement project at black spot have been decreasing since 2010, with a reduction in the amount of government spending, coupled with proposing a uniform improvement plan. In order to promote more efficient improvement projects, it is necessary to evaluate the efficiency of local governments and improve the business methods of local governments with low efficiency. However, more sophisticated efficiency analysis methods are needed. Because in previous studies have been limited to the analysis of effects before and after the project through the simple before-after analysis. For this purpose, this study analyzed the efficiency of improvement project at black spot by local governments in Gyeonggi-do using DEA to compare and analyze efficiency in various fields. As a result, Goyang, Seongnam, Paju, Hanam and Yangju showed high efficiency local governments. For local governmetns with low efficiency, the improvement projets to improve efficiency were divided into civil engineering work, structure work, pavement work, additional work and transportation work, and the appropriate construction ratios of each local government were analyzed and presented.

Mobile WiMAX 표준화 동향 및 WiBro 글로벌화 전략

김형규,김현표,Kim Hyeong-Gyu,Kim Hyeon-Pyo 한국통신학회 2006 정보와 통신 Vol.23 No.4

신장질환자의 약물요법 및 혈액ㆍ복막투석

김형규,Kim, Hyeong-Gyu 사단법인 한국당뇨협회 2005 당뇨 Vol.184 No.-

일반적으로 만성신부전이라고 부르는 상태가 되면 치료의 목표는 신장기능의 악화를 막는 것에서 신장기능악화로 인하여 생기는 합병증을 예방하거나 치료하는 쪽으로 이동하게 된다.

공비증류에 의한 MEK - 물 - 톨루엔 혼합물로부터 MEK 분리에 관한 이론적 연구

김형규,김성훈,한춘,나병기,정연수,송형근 ( Hyung Kyu Kim,Sung Hoon Kim,Choon Han,Byung Ki Na,Yon Soo Chung,Hyung Keun Song ) 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.2

MEK(methyl ethyl ketone) can be separated from MEK-Water-Toluene azeotropic mixture by azeotropic distillation using the selectivity of entrainer. Acetone was selected as the best entrainer by comparing the ratio between infinite dilute activity-coefficients. Depending on the added amount of acetone and the concentration of MEK-Water-Toluene mixture, the presence of two phase was identified by UNIFAC model. When acetone was added more than 3.14 times the amount of MEK-Water-Toluene mixture, the mixture formed a single phase and the azeotropic point was eliminated. The optimum amount of entrainer to minimize the plate number was calculated through the simulation of distillation process by UNIQUAC equilibrium model. The number of ideal plates increased with MEK composition and was independent of water and toluene composition. Also, the optimum feed-plate location was calculated at each reflux ratio for various amounts of entrainer, and the minimum reflux ratio was identified as 0.6. For the case that brought Acetone-Water as bottom product and MEK-Toluene as distillate from MEK-Water-Toluene mixture where the composition of MEK, water and toluene compositions was 40, 30, 30 mole%, respectively, 14 ideal plates were required for the best results when the reflux ratio was 0.9 and the ratio of entrainer to feed was 5. The bottom product was composed of 56 mole% of MEK and 44 mole% of toluene and the optimum feed-plate was located between the sixth and the eleventh in this case.

$37^{\circ}C$에서 incubate 한 가토(家兎) 폐포표면활성물질(肺胞表面活性物質)의 활성도(活性度)의 변화(變化)와 in vitro X 선조사(線照射)의 영향(影響)

김형규,주영은,Kim, Hyung-Kyu,Choo, Young-Eun 대한생리학회 1971 대한생리학회지 Vol.5 No.2

In an attempt to understand the possible effects of temperature and X-irradiation on the activities of surfactant in rabbits, the pulmonary surfactant from the rabbit was subjected to the incubation at $37^{\circ}C$ and X-irradiation with 900r in vitro, and activities of surfactant were measured at 10, 30, 60, and 90 minutes. Tension-area diagram of the lung extract was recorded automatically by the modified Langmuir-wilhelmy balance with a synchronized recording system designed in this Department. A comparison was made with the normal and the following results were obtained. 1) The maximal surface tension, minimal surface tension, width of the tension area diagram at the surface area of 40% and stability index of the normal rabbit lung extract were $31.6{\pm}3.11\;dynes/cm,\;8.2{\pm}0.56\;dynes/cm,\;21.4{\pm}4.40\;dynes/cm\;and\;1.12{\pm}0.22$,respectively. 2) In the $37^{\circ}C$ incubation group, maximal surface tension was similar to the normal value, while minimal surface tension was significantly lower and stability infer was markedly higher than the normal. 3) In the group where X-irradiation of 900r in vitro was applied, maximal surface tension did not differ greatly with the normal or the $37^{\circ}C$ incubation group. The minimal surface tension was significantly lower than the normal but comparing with the $37^{\circ}C$ incubation group, some decrease in minimal surface tension was noted. The width of the tension·area diagram at 40% and stability index in the irradiated group were significantly higher than the normal but a tendency of increase was noted comparing with the $37^{\circ}C$ incubation group.