http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
맹인재,백수현,김용,윤신용,Maeng, In-Jae,Baek, Soo-Hyun,Kim, Yong,Yoon, Shin-Yong 한국조명전기설비학회 2000 조명·전기설비학회논문지 Vol.14 No.5
본 논문에서는 2개의 전기자 구조로된 대형 voice coil용 가동자석형 LDM을 대상으로, LDM의 추력 대 체적비를 고려하며 가동자의 칠섬익 체적올 추력의 감소없이 최적화함므로서 LDM의 응답 특성을 향상시킬 수 있는 방법에 대해 살펴보았다. 자기회로는 선형이라는 가정하에 LDM 해석을 수행하여 LDM의 가동자를 설계하였으며, 유한요소해석 소프트웨어인 Maxwell-2D에 의해서 철심의 포화를 고려한 가동자 철섬의 두께를 결정하였다. 이러한 결과에 대한 타당성은 기준형 LDM과 가동자 철심의 형상이 개선된 개선형 LDM의 2대를 설계, 제작한 실험 결과에 의해서 입증하였다. In this paper, to improve the mechanical response of the Moving Magnet Type LDM, the design of the LDM was optimized to achieve a large force to volume ratio without reduction the force. The model of the LDM and its optimization procedure were developed on the initial assumption that the magnetic circuit is linear. To analyze the magnetic flux distribution throughout the volume of the LDM and the slider back iron, a 2D finite element analysis of the LDM was performed.
맹인재,백수현,김용,윤신용,Maeng, In-Jae,Baek, Soo-Hyun,Kim, Yong,Yoon, Shin-Yong 한국조명전기설비학회 2000 조명·전기설비학회논문지 Vol.14 No.4
본 논문에서는 단권선 가동자석형 IDM올 대상으로, LDM 질량의 증가없이 철심 중심부의 포화를 억제하면서 일정 추력을 발생시켜 장 스트로크화가 가능한 다권선형 LDM을 제안하였다. 제안된 LDM의 추력특성을 해석하기 위하여 유한요소해석 소프트웨어인 Maxwell 2-D를 이용하여, 영구자석 자극과 코일 사이의 공극에서 발생하는 힘(F)중, 수직력$(F_y)$과 수평력$(F_x)$을 분석하였다. 이로부터 일정 추력을 발생할 수 있는 영구자석 폭과 권선 폭의 비 1:0.84 를 결정하여, 전기자 권선올 분할 권션하였다. 이러한 결과에 대한 타당성은 다권선형 IDM을 설계, 제작하여 실험을 통해 입증하였다. In this paper, to achieve the constant thrust force of the double side moving-magnet type LDM, the new armature winding of the LDM was proposed so as to restrain the saturation of the center yoke without increasing the mass of LDM. According to analyzing the magnetic flux distribution throughout the air-gap of the LDM, the magnet and winding width (1:0.84) was determined. The 2D finite element analysis was performed for force analysis on air-gap.