http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이호진,김성덕,전계원,이문세 위기관리 이론과 실천 2015 Crisisonomy Vol.11 No.9
본 연구의 목적은 수로에서 소단의 위치 변화에 따른 하류단에서의 토석류의 유량 및 토사농도를 분석하는 것 이다. 또한 공급유량의 변화에 따라서 소단의 각 위치에서의 양상을 조사하였으며, 수치해석은 유한차분법을 기 초로 하였다. 공급유량이 작은 경우 소단의 위치가 상류단과 가까울수록 그리고 하상경사가 클수록 토석류의 유 량이 크게 발생하고, 소단의 위치가 하류단으로 갈수록 토석류의 유량이 작아지는 것을 발견하였다. 또한 유량의 증가는 큰 fluctuation을 발생시켰고, 소단의 위치가 상류단과 가까울수록 고유량이 초기에 발생하며, 하상경사가 클수록 고유량의 fluctuation이 발생하게 됨을 발견하였다. 토사농도의 경우 유량이 작을수록 하상경사 및 소단 위치 변화에 따라서 큰 차이가 나지 않았지만, 유량이 증가하고 하상경사가 큰 경우 토사농도의 변곡점이 발생하 였다. The purpose of this study is to analyze the water discharge and the sediment volume concentration of debris flow at the end of downstream channel according to the various locations of the berm. The aspect of debris flow by the variance of the supplying water discharge was also investigated at the each locations of berm, based on the Finite Difference Method (FDM). For the case of fewer water supply, the closer the berm was to the upstream channel and the higher the slope angle was, the larger water discharge of debris flow was observed. The increase in water supplying discharge lead to a higher fluctuation at the end of downstream channel. For the case of sediment volume concentration, the value of sediment volume concentration remain unchanged for each location of the berm with a low level of supplying water discharge. On the other hand, an inflection point was occurred when the supplying water discharge increased and the slope angle of the channel was large.
가상 고정물을 이용한 축 대칭 용접물의 용접 변형 해석 모델링 기법
이호진,이봉상,정인철,심덕남,Lee, Ho-Jin,Lee, Bong-Sang,Jung, In-Chul,Shim, Deog-Nam 대한용접접합학회 2010 대한용접·접합학회지 Vol.28 No.2
Although two dimensional axi-symmetric modeling is useful for calculating the residual stresses of a cylindrical weldment such as a core barrel, this conventional axi-symmetric modeling can not express the behavior of shrinkage well in the locally heated weld zone. New technique of two dimensional axi-symmetric modeling using a virtual fixture is suggested to simulate the behavior of dimensional changes in the weld zone during the heating period of the welding. The virtual fixture in the model has a role to restrain the expansion of the high temperature heated region, which simulates equivalent intrinsic restraint effect of the weldment. In the restraint condition of the virtual fixture above the critical yield strength, the calculated shrinkages by using the suggested axi-symmetric model agreed well with those measured in a welded mock-up. The calculated residual stresses by using the suggested axi-symmetric model also agreed well with those calculated by using conventional axi-symmetric model which has beenused for calculating residual stresses in the weldment.
이호진,Lee, H.J. 한국전자통신연구원 2015 전자통신동향분석 Vol.30 No.4
약 20년 전 세상의 이목을 끌었다가 무너진 꿈으로 남아있는 위성벤처 1.0. 즉 텔레데식, 이리디움 등으로 대표되던 대규모 저궤도 위성군(Big LEO) 통신시스템이 다시 추진되고 있다. 이른바 위성벤처 2.0으로 불리우는 스페이스엑스(Space Exploration Technologies: SpaceX). 원웹(OneWeb), 리오셋(Leosat) 등의 저궤도 위성군 통신시스템의 경쟁적 재등장이다. 이 배경에는 인터넷 업체인 구글(Google)과 페이스북(Facebook)이 관련되어 있다. 이미 과거의 경험이 있는 상황이기 때문에 성공가능성에 대한 기대가 상당히 크지만 회의론도 만만치 않다. 이들의 등장배경과 각 시스템의 기술적 제안, 비지니스 모델, 그리고 네트워크 구축 및 운용경비 절감을 위한 각각의 전략적 접근에 대해서 간략히 알아본다. 기존 이리디움이나 글로벌스타도 1세대 위성수명이 다하여 이제 2세대 위성군으로 업그레이드된 상태이라 신구 시스템 간의 차별적 경쟁도 이제 피할 수 없게 되었다. 신규제안 시스템의 성공적 안착을 위한 고려사항과 이러한 흐름에 대한 우리나라의 대응도 살펴보았다.