신라 중고기골제(中古期骨制)의 성립과 운영

박수진 ( Soo Jin Park ) 수선사학회 2011 史林 Vol.0 No.39

The Golpum system was the unique form of the status system in the Silla dynasty in Korea. It was a typical ancient Korean society`s status system which has been investigated field in the academia. In particular, a kinship system, which is composed of Seong-gol and Jin-gol, is the most hottest issue in the Korean academic circles. However, there is a no point of agreement whether Seong-gol was the reality or not, and concerning about its management and times. This research has a purpose to investigate how the status system established and guaranteed in the society. The Buddism has attracted public attention as a theoretical basis of the status system. The Samkuksagi (The chronics of the three nations) described the Buddism as a state religion while it did not focus on the myths about the Buddism. We assume that the Buddism was the meaningful political controller in the Silla dynasty. Seong-gol was regarded as the royal familiy, and it was available when the King had the superiority over the nobility. The Kings of Sylla dynasty had been called the Great King with a qualifier ``saint`` when the Buddism instituted a state religion. It means that Seong-gol (the saunt family) was established based on the Buddism. Jin-gol also entered a field of history similar times to Seong-gol, and both two terminologies was established the same period in terms of the Buddism terminology. Seong-gol guaranteed a royal family`s prestige through the change of ennoble system Galmun King and the use of the Great King title. The King`s brother, who were Seong-gol, secured the superiority over the nobility by getting the title of ennoblement. The Kings also solidified their status through the ennoble system, and they monopolized political power because the kings restrained the right of succession only kings heirs. Jin-gol also guaranteed their political prestige after established Daedeung. The House of Lords in Silla dynasty limited the qualification only who had the title of Daedeung. Jin-gol class took the reins of the nobility through only Jin-gol getting the title of Daedeung.

학술발표회 초록 ( 열역학 (Ⅱ) ) : Butane - Methanol , Butane - Ethanol 계의 90℃ 등온 기액상평형과 과잉 몰엔탈피

박수진,박소진 ( Soo Jin Park,So Jin Park ) 한국화학공학회 1994 춘계학술발표회 Vol.- No.-

치면열구전색재의 충전량에 따른 미세누출의 비교연구

박수진,정태성,김신,Park, Soo-Jin,Jung, Tae-Sung,Kim, Shin 대한소아치과학회 2003 大韓小兒齒科學會誌 Vol.30 No.2

본 연구는 치면열구전색재의 충전량이 미세누출에 미치는 영향을 비교분석할 목적으로 실시되었다. 6개의 군으로 나누어 각각 다른 충전량, 치면 전처리, 충전재를 적용하여 미세누출 양상을 비교하였다. 60개의 제 3대구치를 3개의 군으로 나누어 각 군당 20개씩 시편을 구성하였다. 각 치아는 교합면을 두 부분으로 나누어 한 부위는 충전재의 폭이 1mm이하가 되도록 충전하고(1, 3, 5군), 나머지 한 부위는 2mm이상 되도록 충전을 하였다(2, 4, 6군). 1, 2군은 산처리후 Helioseal F로 치면열구전색을 실시하였고, 3, 4군은 산처리후 상아질 접착제로 치면 전처리한 후 Helioseal F로, 5, 6군은 유동성 복합레진인 Tetric Flow로 치면 열구전색을 실시하였다. 500회의 열순환 및 색소침투 후, 미세누출도를 관찰하고 비교분석하여 다음과 같은 결론을 얻었다. 1. 동일한 충전폭을 적용하였을 경우, 미세누출도는 5군<3군<1군과 6군<4군<2군의 순으로 나타났으나 유의한 차이는 아니었다(p>0.05). 2. 동일한 재료와 치면처리를 하되, 충전폭만을 달리한 군들, 즉 1군과 크군, 3군과 4군, 5군과 6군간의 미세누출도에서는 유의한 차이를 보였다(p<0.05). 3. 미세누출은 전색재의 물성, 상아질 접착제 전처리 여부 보다 전색재의 충전량에 더 많은 영향을 받았다. With the purpose of evaluating the effect of ailing amount of pit and assure sealants on the microleakage, 6 groups of specimens with different filling amount, filling materials and surface pretreatment were investigated. Sixty permanent third molars were divided into three groups. The occlusal surface of each tooth was divided into two parts; the filing width of one part was below 1mm (group1, 3, 5), and in the other part more than 2mm (group 2, 4, 6) Group 1 and 2: Helioseal F was applied directly to etched enamel; Group 3 and 4: Helioseal F was applied to etched and scotchbond Multi-purpose plus pre-treated enamel; Group 5 and 6: Tetric Flow was applied. After 500 times thermocycling and dye infiltration, we evaulated the microleakage. The results were as follows; 1. The mean microleakage score at each width were increased in the following order;group 5<3<1, and group 6<4<2. 2. In comparing the groups with same material and surface pretreatment but with different filling width (group 1 versus 2, 3 versus 4, 5 versus 6), the microleakage scores were significantly different. 3 The microleage was affected by filling amount of pit and assure sealants than Oiling materials and dentin bonding agent pretreatment.

PEI/DGEBA 블랜드계의 열적특성 및 파괴인성

박수진,진성열,강신영,Park, Soo-Jin,Jin, Sung-Yeol,Kaang, Shinyoung 한국접착및계면학회 2003 접착 및 계면 Vol.4 No.3

본 연구에서는 이관능성 에폭시 (diglycidyl ether of bisphenol A. DGEBA)와 Polyetherimide(PEI) 블랜드를 Amime계 경화제인 DDM을 이용하여 경화를 시켰으며, PEI의 함량 변화가 순수 에폭시 수지의 열적특성과 파괴인성에 미치는 영향에 대해 고찰하였다. 경화된 시편의 열적특성은 DSC에 의한 열분석을 통해 Kissinger 식을 이용하여 경화 활성화 에너지 ($E_a$)를 구하였고, 파괴인성은 크랙성장의 저항을 나타내는 임계응력세기 인자 ($K_{IC}$)을 측정하여 알아보았다. 시편의 파단특성은 주사전자현미경 (SEM)을 통해 조사하였으며, 기계적 계면특성을 알아보기 위해 contact angle로 표면자유에너지를 측정하였다. 실험 결과 DGEBA/PEI 블랜드계의 $E_a$, $K_{IC}$는 PEI 함량이 7.5 phr에서 최대값을 보였다. 이는 PEI 도입에 따른 치밀한 네트워크 구조가 증가했기 때문으로 판단되어 진다. 또한 DGEBA/PEI 블랜드계의 표면자유에너지는 $K_{IC}$와 유사한 경향을 보였으며, 이는 에폭시의 하이드록실기와 PEI의 imide 그룹 사이의 수소결합에 의해 극성요소가 증가되었기 때문으로 판단되어진다. In this work, diglycidyl ether of bisphenol A (DGEBA)/polyetherimide (PEI) blends were cured using 4,4-diaminodiphenyl methane (DDM). And the effects of addition of different PEI contents to neat DGEBA were investigated in the thermal properties and fracture toughness of the blends. The contents of contents of containing PEI were varied in 0, 2.5, 5, 7.5, and 10 phr. The cure activation energies ($E_a$) of the cured specimens were determined by Kissinger equation and the mechanical interfacial properties of the specimens were performed by critical stress intensity factor ($K_{IC}$). Also their surfaces were examined by using a scanning electron microscope (SEM) and the surface energetics of blends was determined by contact angles. As a result, $E_a$ and $K_{IC}$ showed maximum values in the 7.5 phr PEI. This result was interpreted in the increment of the network structure of DGEBA/PEI blends. Also, the surface energetics of the DGEBA/PEI blends showed a similar behavior with the results of $K_{IC}$. This was probably due to the improving of specific or polor component of the surface free energy of DGEBA/PEI blends, resulting in increasing the hydrogen bonding of the hydroxyl and imide groups of the blends.

수술실 간호사의 혈행성 감염 예방에 대한 지식, 인식 및 수행

박수진,김금순,Park, Soo-Jin,Kim, Keum-Soon 한국중환자간호학회 2009 중환자간호학회지 Vol.2 No.2

Purpose: The purpose of this study was to identify the knowledge, perception and compliance to prevent from blood borne infection for the nurses working at operating room. Methods: The data was collected from the questionnaire surveying 330 operating room nurses from 7 different hospitals located in Seoul and Gyeonggi-do from February 11 to March 7 2008. The instrument for perception and compliance to prevent from blood borne infection was 24-item questionnaire, which had been developed by Choi(2005). In addition, to find out the knowledge level of hepatitis B, hepatitis C, AIDS and handling of syringes, 19-item questionnaire was used, which was developed by researcher based on Kim(2003) and Choi(2005). Results: The average score of the knowledge was 14.42. The average perception was 4.51 out of 5.00. The average compliance was 3.91 out of 5.00. The correlation among the knowledge, perception and compliance to prevent from blood borne infection showed that there was positive correlation between the knowledge and perception(r= .234, p= .000) and also it was positive between perception and compliance(r= .415, p= .000). Conclusion: To improve compliance to prevent from blood borne infection for operating room nurses, it should be studied to enhance the perception to prevent from blood borne infection. Moreover, the operating room should be equipped with protective devices and written safety guidelines.

가방 휴대 방법이 보행 시 발바닥 접촉 양상에 미치는 영향

박수진,권유정,김민희,김진상,Park, Soo-Jin,Kwon, Yoo-Jung,Kim, Min-Hee,Kim, Jin-Sang 대한물리치료과학회 2011 대한물리치료과학회지 Vol.18 No.2

Purpose: The purpose of this study was to analyze the changes of parameters of foot contact by various carrying a pack methods during walking. Method: The subjects were consisted of normal forty four persons (males 30, females 14, mean age 23). The carrying a pack methods were classified into five conditions: carrying no bag(Con 1), carrying a backpack(Con 2), carrying a shoulder bag(Con 3), carrying a cross bag(Con 4), carrying a one-hand bag(Con 5). All subjects were participated in these five condition and measured foot pressure by F-scan system during walking. Then foot contact time, foot contact area, foot contact length and width were measured and analyzed. The repeated one-way analysis of variance (ANOVA) was used to get difference between conditions and independent t-test was used to get difference between left and right foot within condition. Result: In the comparison of parameters of foot, contact time, contact area and mid foot width were significantly different between conditions(p<.05), and in both foot contact time at condition 5 showed the most significant reduction(p<.05). In the comparison of parameters of foot between left and right foot within condition, every conditions were not significantly different(p>.05). Conclusion: In this study various carrying methods changed the parameters of foot contact and showed significant difference in some articles between carrying methods. However, asymmetric load of pack by carrying methods didn't affected symmetry of parameters of foot contact between left and right foot.

소양호 유역의 오염총량관리를 위한 유달율 산정

박수진,최한규,한양수,Park. Soo Jin,Choi. Han Kuy,Han. Yang Soo 한국방재학회 2012 한국방재학회논문집 Vol.12 No.2

본 논문은 북한강 상류의 최대 다목적댐인 소양호 유역을 대상으로 오염물질 항목에 대한 배수구역의 유달율을 산정하여 오염부하량의 유달특성을 관찰하고자 하였다. 유황변화에 따른 오염부하량의 유달특성을 관찰한 결과 BOD와 SS, T-P의 경우 인북천 유역에서 높은 유달율을 보였으며, T-N의 경우 점오염원이 차지하는 비율이 큰 내린천과 북천, 합강시가지 유역에서 높은 유달율을 보였다. 전체적으로 풍수량과 고수량 기간에서 높은 유달율을 보였으며, 소양호의 경우 지류하천에 비해 풍수량 이하에서 완만한 유달곡선을 보이고 있어 기저유출기간에도 오염물질이 지속적으로 유출되는 것으로 관찰되었다. 다음으로 유출량에 따른 유달율포락곡선을 작성할 수 있었으며, 이를 이용하여 유역내 총량관리 목표수질설정 및 오염부하량 할당 결정이 가능할 것이다. The study aimed at observing the delivery characteristics of pollutant loadings by calculating the delivery rate of drainage areas on the pollutant item in the basin of Soyangho that is the biggest multipurpose dam in the upper region of the Bukhan River. According to the result of the observation on the delivery characteristics of pollutant loadings depending on the flow regime change, the delivery rate increases in BOD, SS and T-P. In case of T-N, the delivery rate increases in Naerincheon, Bukcheon and around Hapgang city where there are many point pollutant sources. The delivery rate generally increases during the period of ninety-five day flow and high water flow. In case of Soyangho, the delivery curve shows a gentle slope when lower ninety-five day flow compare to tributary channels, which indicated the continuous discharge of pollutants during the period of base flow. In addition, the delivery rate duration curve depending on the amount of discharge was recorded, which can be utilized to establish TMDL management`s objective of water quality and to decide.

활성탄소의 산 - 염기 표면처리에 따른 N2 , CO2 및 NH3 - 흡착거동

박수진,김기동,이재락 ( Soo Jin Park,Ki Dong Kim,Jae Rock Lee ) 한국공업화학회 1998 공업화학 Vol.9 No.6

불소처리된 카본블랙을 충전한 HDPE 기지 컴파운드의 PTC/NTC 특성에 관한 연구

박수진,송수완,서민강,신재섭,김규철,Soo-Jin Park,Su-Wan Song,Min-Kang Seo,Jae-Sup Shin,Kyuchul Kim 대한화학회 2003 대한화학회지 Vol.47 No.2

In this study, the fluorinated carbon blacks(CB) were used to reduce the negative temperature coefficient (NTC) phenomenon of the CB-filled high density polyethylene(HDPE) compounds in the fluorination pressure of 0.1-0.4 MPa. The changes in surface properties of the CB were investigated by using FT-IR, XPS and contact angle measurements. From the FT-IR results, the fluorinated CB showed the C-F absorption peak at 1400-1000 cm$^{-1}$ and the peak intensity was increased with increasing the fluorination pressure. Also, the analysis of XPS spectra of the fluorinated CB indicated that fluorine content was increased with increasing the fluorination pressure. Meanwhile, the surface free energy of the fluorinated CB was decreased with increasing the fluorination pressure. Consequently, the increase of fluorine contents on CB made a disappearance of NTC behaviors of CB/HDPE compounds, which was probably due to the reduction of CB reaggregation after melting point of the HDPE, resulting from decreasing the surface free energy of CB particles. 본 연구에서는 PTC 소자의 NTC 현상을 제거하기 위하여 카본블랙을 0.1-0.4 MPa의 압력으로 불소처리 한 후 이를 이용하여 카본블랙/HDPE 전도성 컴파운드를 제조하였다. 불소처리한 카본블랙의 표면특성 변화는 FT-IR, XPS 그리고 접촉각 측정을 통하여 확인하였다. FT-IR실험 결과, 불소처리된 카본블랙은 1400-1000 cm$^{-1}$ 영역에서 C-F 피크를 나타내며 처리압력이 증가할수록 C-F 피크의 세기가 증가함을 확인할 수 있었다. 또한, XPS 분석을 통해 불소처리 압력이 증가할수록 카본블랙 내의 불소의 함량이 증가함을 확인하였다. 그러나, 불소처리된 카본블랙의 표면자유에너지는 처리압력이 증가할수록 감소하였다. 결과로서, 카본블랙의 불소 처리를 통해 카본블랙/HDPE 컴파운드의 NTC 현상이 사라졌는데, 이는 카본블랙의 표면자유에너지 감소가 수지의 융점 이후 일어나는 카본블랙 입자간의 재결합을 방해하기 때문이라 사료된다.

Design of Quaternary Logic gate Using Double Pass-transistor Logic with neuron MOS Threshold gate

박수진,윤병희,김흥수,Park, Soo-Jin,Yoon, Byoung-Hee,Kim, Heung-Soo Institute of Korean Electrical and Electronics Eng 2004 전기전자학회논문지 Vol.8 No.1

다치 논리 패스 게이트는 다치 논리를 구성하기 위한 중요한 소자이다. 본 논문에서는, 뉴런 $MOS({\nu}MOS)$ 임계 게이트를 갖는 2중 패스-트랜지스터 논리를 이용하여 4치 MIN(QMIN)/negated MIN(QNMIN) 게이트 그리고 4치 MAX(QMAX)/negated MAX(QNMAX) 게이트를 설계하였다. DPL은 입력 캐패시턴스의 증가 없이 게이트 속도를 향상 시켰다. 또한 대칭 배열과 2중 전송 특성을 갖는다. 임계 게이트는 ${\nu}MOS$ 다운 리터럴 회로(DLC)로 구성 된다. 제안된 게이트는 다양한 다치 임계 전압을 실현할 수 있다. 본 논문에서, 회로는 3V의 전원 전압을 사용하였고 0.35um N-Well 2-poly 4-metal CMOS 공정의 파라메터를 사용하였으며 모든 모의 실험은 HSPICE를 이용하였다. A multi-valued logic(MVL) pass gate is an important element to configure multi-valued logic. In this paper, we designed the Quaternary MIN(QMIN)/negated MIN(QNMIN) gate, the Quaternary MAX(QMAX)/negated MAX(QNMAX) gate using double pass-transistor logic(DPL) with neuron $MOS({\nu}MOS)$ threshold gate. DPL is improved the gate speed without increasing the input capacitance. It has a symmetrical arrangement and double-transmission characteristics. The threshold gates composed by ${\nu}MOS$ down literal circuit(DLC). The proposed gates get the valued to realize various multi threshold voltages. In this paper, these circuits are used 3V power supply voltage and parameter of 0.35um N-Well 2-poly 4-metal CMOS technology, and also represented HSPICE simulation results.