http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mo 화학기상증착에 있어서 불순물 농도에 미치는 증착조건의 영향
배상석,서성교,홍은식,김승모,조미정,한혜정,이두성,김세훈,민석홍 국립7개대학공동논문집간행위원회 2001 공업기술연구 Vol.1 No.-
The thermal decomposition process of Mo(CO)_6 on chemical vapor deposition was investigated by analyzing the effects of deposition temperature, pressure, and reaction gas on the phase change of deposited films. Mo_2C was deposited at or below 350℃ due to the incompleteness of thermal decomposition of Mo(CO)_6, but Mo films was successfully deposited at 400℃ or higher temperatures. The variation of deposition pressure did not change the dependence of decomposition process on deposition temperature. The activation energy of surface reaction was 5.8 ㎉/mole.
이륙시 항공기 ENGINE 소음분포에 관한 연구 : 소형 비행기를 중심으로
李晶模 한국항공대학교 1991 論文集 Vol.29 No.-
경제발전과 GNP증가에 따라 여러 교통수단중 특유의 장점을 지닌 소형항공기의 수요가 증가 되면서 새로운 소형비행장 건설이 요구되고 있으며 이로 인하여 소형항공기의 소음영향도 새로운 문제로 부각되고 있는 추세이다. 본 연구는 비행기 소음이 Peak치를 나타내는 이륙시 엔진소음을 실측하여 활주로 부근의 소음분포를 분석 평가 하였으며 소형비행장 건설 및 운영에 필요한 소음영향평가 자료로서 도움이 될 것을 기대한다. With the increase of GNP the demand for small aircraft and the needs for small airfield increase considering small aircraft have peculiar merits. Owing to this, noise influences against small aircraft stand out in new problems recently. This paper attempt to take the accurate measurements of the engine noise levels of small airplane on the takeoff leg in which peak noises are produced. And the paper also analyzed and evaluated the distributions of engine noises made out on the basis of these measurements. It is to deal with materials for valuations of noise influences planning small airfield are being built or operated.
Anisakids larvae의 형태학적 분류 : 해산어류 및 두족류를 중심으로 On the Marine fishes and Cephalopoda
이정훈,정영모,한성용,손성원 慶南大學校 附設 基礎科學硏究所 1995 硏究論文集 Vol.7 No.-
In order to study classification of the morphological features and types of anisakids larvae eight species of marine fishes and two cephalopoda purchased in the near southern sea in Korea, were investigated and classified into the morphological characteristics of each type of the larvae, and the following results were obtained on the basis of the methods of Berland(1961), Koyama et al(1969) and Chai et al(1986). 1. Anisakis(typeⅠ) larva: The length and width of nematode are 14.2∼26.4mm and 0.22∼0.51mm respectively. The anterior region has well-developed boring tooth. Tail is 0.09∼0.12mm and the tip of tail has a globular form and well-developed a mucron. 2. Terranova (type A) larva: The length is 24.5∼34.1mm and longest among anisakids larvae. Width is 0.50-0.84mm, and intestinal cecum had reached one-third of anterior larva of ventriculus, and the worm has three lips at anterior end, and had boring tooth on the lips. The tail is 0.08∼0.12mm and has well-developed a mucron. 3. Raphidascaris spp. larva: The nematode was 8.20∼8.42mm in length and 0.21∼ 0.29mm in width. The anterior region has boring tooth. Especially, the genital organ was developed. The tail is 0.11∼0.12mm and has well-developed mucron at the tip of it. 4. Contracaecum(type A) larva: The nematode was 6.8∼9.4mm in length and 0.09∼ 0.15mm in width. The lips were depressed. The Anterior region do not have boring tooth. The tail is 0.08∼0.09mm relatively short and has about 15∼30 micro-spines and mucron at its terminal portion. 5. Contracaecum (Type A') larva: The nematode was 17.5∼24.4mm in length and 0.22∼0.27mm in width. The lips were depressed and the anterior region does not have boring tooth as the type of Contracaecum A. The tail whose length was 0.20∼0.31mm was very long and had about 7∼12 minutes spines at its terminal portion. 6. Contracaecum (Type C) larva: The worm was 13.6∼35.2mm and 0.28∼0.60mm in size, and the lips were depressed and the anterior region does not have boring tooth. The tail did not have mucron, as the type of Contracaecum A, A'. 7. Contracaecum(Type C') larva: The worm was 10.2∼14.8mm and 0.15∼0.22mm in size, and had boring tooth as the type of Contracaecum A, A' and C. The tail was 0.08∼0.09mm and relatively short. In addition, it did not have mucron at its terminal portion. 8. Contracaecum (Type D) larva: The worm was 12.0∼19.8mm and 0.16∼0.25mm in size, and had boring tooth as the type of Contracaecum C'. The tail was 0.11∼0.16 and had small mucron at its terminal portion. 9. Contrecaecum (Type D') larva: The worm was 7.10∼16.5mm and 0.14∼0.25mm in size, and had boring tooth as the type of Contracaecum C' and D. The tail was 0.11∼0.16mm, and covered with sheath, as the type of Contracaecum D but did not have a mucron.
Rieger syndrome : 증례보고 A CASE REPORT
이홍모,김정욱,장기택,이상훈,한세현,김종철 大韓小兒齒科學會 2003 대한소아치과학회지 Vol.30 No.4
Rieger syndrome은 눈의 전안방 기형과 치아결손을 특징으로 하는 희귀한 유전질환으로 두 개안면 이상과 체성기형을 동반하기도 한다. Rieger syndrome은 상염색체 우선유전(autosomal dominant inheritance)되며, 발생빈도는 약 200,000분의 1이고, Paired-like homeodomain transcription factor2(PITX2)의 변이가 이 질환과 연관이 있는 것으로 보고되고 있다. 본 증례는 Rieger syndrome으로 진단 받은 4세 7개월 된 여아에 대한 것으로, 양안에 다동공증과 후태생환을 보이고, 측모두부계측에서 상악골 열성장이 나타났으며, 상악유측절치와 더불어 다수의 영구치 결손이 방사선 상에서 관찰되었다. 이 증례를 통하여 Rieger syndrome 환아의 구강 및 두 개안면의 소견을 관찰하고, 관련 문헌을 고찰하여 다소의 지견을 얻었기에 보고하는 바이다. Rieger syndrome is a rare, autosomal dominant gentic disorder characterized by malformation of the anterior chamber of the eye(goniodysgenesis) coincident with hypodontia. It may also be accompanied by a spectrum of dental, craniofacial and somatic anomalies. Mutations in paired-like homeodomain transcription factor2(PITX2) are associated with the syndrome, and its frequency in the general population has been estimated to be 1 : 200.000. In the present case, the patient, 4 year 7 month-old female, had posterior embryotoxon and polycoria. The maxilla was retrusive in cephalometric radiography. She had congenital missing on #52, #62 and some tooth germs of permanent tooth were not detected in panoramic radiography. The purpose of this paper is to report the dental and craniofacial findings and review the pertinent literature through this case.
이정모,은희봉 한국항공운항학회 1997 한국항공운항학회지 Vol.5 No.1
FAR 23, AC 23-8, 그리고 Order 8110.7을 이용하여 경비행기의 비행 시험 절차에 대한 연구를 수행하였다. 본 연구에서는 창공-91의 비행 시험을 통한 경험을 바탕으로 형식증명을 위한 주요 절차에 대한 연구를 수행하였다. 본 연구는 소형 비행기의 제작자, 항공관련 기술자, 비행 시험 기술자, 비행 시험 조종사, 그리고 관련 정부 관계자들에게 비행 시험에 관련된 기준을 이해하도록 하기 위해 수행된 연구이다. 본 연구에서 비행 시험 방법과 절차는 주로 소형 비행기의 형식증명에 관련된 것으로 관련자들에게 큰 도움이 될 것이다. FIight Test procedures are studied from FAR 23, AC 23-8, and Order 8110.7. We have been studied the main procedures for the type certification of light airplane from the experiences of Chang Gong 91. ?'his study is intended as a reference for small airplane manufacturers, engineers, flight test engineers, and engineering flight test pilots, including government personnel. This study covers flight test items of interest during type certification. These methods and procedures are promulgated, in the interest of standardization, for use during normal category airplane flight test certification activities.
이모래,김오정,최은화,정동선 서울여자대학교 자연과학연구소 2004 자연과학연구논문집 Vol.16 No.-
Actinomycetes were isolated from soil at Kangdong area in Seoul to screen bioactive metabolites. One of strains having antibacterial activity was selected and characterized. The isolated strain was identified as Streptomyces sp. on the basis of its cultural, morphological and physiological properties. This strain produced antibacterial substances in culture broth after 7days cultivation, and its productivity continued to increase for 14 days. The metabolites exhibited potent antibacterial activities to various bacterial strains including multidrug-resistant strain of Staphylococcus aureus.
李晶模,朴溶寒 한국항공대학교 1985 論文集 Vol.23 No.-
Although most of the aircraft pilot understand that the accurate and practical flight performance can finally be determined by the air density they have tendency to neglect the recognition and the application of the density altitude as a measuring scale of the air density affecting directly to the actual flight performance. Probably this tendency is caused by the complexity of applying process of the D A factor for the actual flight and their general idea of thee resultant errors which would be small amount being negligible for the safety flying. This paper is to deal with examination dy reference to the applying method of the density altitude for the flight and to the anticipated errors of flight performance in relation to the computing process of the density altitude and is emphasizing the importance of density altitude for the pilot.
대학생의 기본 심폐소생술 교육 평가 : 간호과와 비간호과를 대상으로
이정은,고봉연,이인모,최근명,박신일,안홍기 한국응급구조학회 2003 한국응급구조학회지 Vol.7 No.1
The purpose of this study was to evaluate the accuracy of CPR skills and the satisfaction of CPR Training targeted for college students. Also, this study made comparative study of nursing students and non-nursing students. The sample consisted of 248 students(132 nursing students, 116 non-nursing students). CPR Training was designed by two components which were a lecture and demonstration by one professor and individual practice 표 instructors. As tool of measurement estimation satisfaction of CPR Training questionnaires were developed based on educated contents. The accuracy of CPR skills were checked by SkillReporter CPR training manikin. Collected data were computerized and analyzed by SPSS-WIN program. The results were as follows : 1. The skills of CPR were cardiac compression 92.79 times/min, correct cardiac compression rate 90.85%, ventilation 9.93 times/min. correct ventilation rate 79.34%. 2. The mean of the accuracy of CPR skills were 2.94(SD .87). 3. When errors were analyzed, the highest item was stomach distension(51.2%) of ventilation skills and too little(70.6%) of cardiac compression skills. 4. The mean of the satisfaction of CPR training were 2.87(SD .17), the highest item of the satisfaction of CPR Training was practice. 5. We found significant statistical differences based on the accuracy and the error, non-nursing students were high in correct cardiac compression per minute(t=3.615, p=0...) and ventilation too much(t=4.292, p=.000), nursing students were high in correct ventilation rate(t=-3.885, p=.000) and cardiac compression too shallow) t=-2.842, p=.005).