한국 · 대만 유도국가대표선수들의 한팔 업어치기 동작 시근 활성도 비교 분석

김의환(Eui-Hwan Kim),안병근(Byung-Keun Ahn),김성섭(Sung-Sup Kim),조준명(Joon-Myoung Cho),지준안(Chun-An Chi),진종현(Jong-Hyun Jin),김지태(Ji-Tae Kim) 한국생활환경학회 2011 한국생활환경학회지 Vol.18 No.2

The purpose of this study was to compare and analyze the electromyograpic activity between Korean and Taiwanese of Ippon-Seoinage (one-armed shoulder throw) as Tokuinage (favorite and major technique) in Judo. The subject (Tori, attacker), who was 4 Korean and Taiwanese representative judoists from 2007 to 2009 years, respectively, Uke (defender) was a Judo-doll made by Kim, Eui-hwan etc. (2007), whole body of judo-doll was fixed, upper body was flexible 35 degree forward and backward, lower was 15 degree, was used to muscles activities measured by surface-electrode & electromyography. Subject performed 5 successful trials respectively, with parter (Uke) was resistance (R-0%) of judo-doll. Muscle activities were obtained from the electromyography analysis. Muscle activities in all phase, Taiwanese were lower than Korean, right Bicep, Trapezius, Tibialis muscles in Kuzushi phase, right Bicep, right Trapezius, left Rectus abdominus in Tsukuri and Kake phase, different between Taiwanese and Korean were signify (p < .5).

Breeding of Tetraploid in Codonopsis lanceolata (Sieb. et Zucc.) Trautvetter by Colchicine Treatment

Kim,Ik-Hwan,Kim,Hag-Hyun,Hong,Eui-Yon,Yun,Jong-Sun,Yun,Tae,Hwang,Ju-Kwang,Lee,Cheol-Hee 한국자원식물학회 2003 Plant Resources Vol.6 No.3

Present studies were carried out to produce tetraploid plants by colchicine treatment using seeds, seedlings and shoot tips of Codonopsis lanceolata. Three tetraploid plants of C. lanceolata were produced from seeds which absorbed 0.1 % colchicine solution for 12 hours, and 0.5% colchicine solution for 1 and 6 hours from seedlings, respectively. But tetraploid was not produced from shoot tips treated by colchicine solution. Compared to diploid, tetraploid plants had larger stomata, but less number of stomata. Fresh weight of tetraploid plants was 1.4∼3.6 times heavier than diploid plants.

체육〔무도〕관련학과 학생들의 대학생활에 대한 전망과 과제

김창모,진중의,장경태,김태균,김공 龍仁大學校 武道硏究所 2011 武道硏究所誌 Vol.22 No.1

이 연구에서는 체육․무도 관련학과 학생들을 대상으로 심층면접을 실시하여 이들의 대학생활에 대한 전반적인 문제점을 심층적으로 규명하는데 목적이 있다. 이러한 목적 달성을 위해서 전라남도 D대학교 체육관련 학과 학생들을 대상으로 비확률 표집방법 중 하나인 유목적 표집(purposeful sampling)에 의해 2학년부터 4학년까지 각 학년별 4명씩 총 12명으로 선정하였는데 다음과 같은 결론을 얻었다. 첫째, 체육․무도 관련학과 학생들의 대학생활에는 선․후배 간 체벌문화가 현재까지도 잠재되어 있음을 알 수 있었다. 이에 학생들은 선배들의 올바른 역할과 선․후배 간의 단합과 화합을 위한 매개체 요인이 필요하다는 의견을 보였다. 둘째, 체육․무도 관련학과와 같은 상․하 관계가 뚜렷한 집단에서는 선․후배간의 의사소통이 더욱 필요하지만 원활히 이루어지지 않는 것으로 나타났다. 또한 원활한 의사소통을 위해 다양한 개선을 요구하는 것으로 나타났다. 셋째, 체육․무도 관련학과 학생들은 대학생활에서 수업관련 문제점에 대해 가장 큰 비중을 두고 있었고 개선에 대한 욕구를 보였다. 특히 체육․무도 관련학과 전공수업에서는 무엇보다도 교수의 지도능력과 현실성 있는 교과과정 개설을 원하는 것으로 나타났다. 넷째, 체육관련 전공자들은 보편적으로 타 전공자들에 비해 취업의 기회 및 관련분야가 상대적으로 적을 수도 있다. 이러한 사회현실은 이들로 하여금 심리적인 불안을 갖게 하였으며 체육관련학과를 선택한 자체에 대한 불만족이기 보다는 체육․무도 관련 전공을 이수하고 나와서 안정적인 직장으로 연결되지 못하는 사회 제반적 여건에 대한 문제점을 보였다. 따라서 체육․무도 관련학과 학생들은 취업관심분야에 대한 업무능력․관련지식 등의 자질과 조건을 갖추기 위해 큰 관심을 가지고 있다. 취업정보 및 자격증 취득 등 취업을 위한 사전준비도 철저히 하고 있는 것으로 나타났다.

Breeding of Tetraploid in Platycodon grandiflorum (Jacq.)A. DC. by Colchicine treatment

Kim,Ik-Hwan,Kim,Hag-Hyun,Hong,Eui-Yon,Yun,Jong-Sun,Yun,Tae,Hwang,Ju-Kwang,Lee,Cheol-Hee 한국자원식물학회 2003 Plant Resources Vol.6 No.3

Present studies were carried out to produce tetraploid plants by colchicine treatment using seeds, seedlings and shoot tips of Platycodon grandiflorum in Campanulaceae. The most successful colchicine treatment for tetraploid production in P. grandiflorum was soaking treatment using 0.01 and 0.5% colchicine solution for 1 hour and 12 hours, respectively. Morphological characteristics of both diploid and tetraploid were similar, but tetraploid plants had more leaves. Compared to diploid, tetraploid had the larger stomata, but less number of stomata. Fresh weight of tetraploids was 20∼40% heavier than that of diploid.

일측성 질폐쇄 및 동측 신장 무발생을 동반한 중복자궁 2예

윤일영,여소진,김형문,김정식,김태희,이해혁,남계현,이권해,김준모,김민의 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Uterus didelphys with unilateral obstructed hemivagina and ipsilateral renal agenesis usually presents after menarch with progressive abdominal pain during menses secondary to hematocolpos, and indeed a very rare congenital anomaly due to Mullerian duct malformation. An accurate and prompt diagnosis is of importance to permit treatment and to assure the future fertility of the patient. Pelvic ultrasound, physical examination and pelvic MRI established a diagnosis of hematometracolpos secondary to uterus didelphys with unilateral imperforate hemivagina. An incision in the vaginal septum allowed drainage of the hematocolpos, providing relief of the patients symptoms. We report two case of uterus didelphys with obstructed hemivagina with brief review of the literature.

반경방향 전자석형 자기베어링의 강성에 관한 연구

김재실,김수태,송의호,이원창 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-

This article describes two and three dimensional electromagnetic finite element models for an active heteropolar radial magnetic bearing, the procedure for obtaining the bearing stiffnesses by simulating the models and the reviews of the models by comparing an experimental test to the ideal closed loop analysis with the stiffnesses calculated. The three dimensional model for the magnetic bearing may be very effectively applied to several types of magnetic bearings.

Passive Sampler를 활용한 공단지역의 대기질 평가

김선태,김성근,김학민,정의석 대전대학교 환경문제연구소 2001 환경문제연구소 논문집 Vol.5 No.-

We used the passive diffusion samplers that are known to be very useful to measure the concentration of air pollutants with respect to the spatial distributions. In this study, we estimated the badge type passive sampler which is evaluation of accuracy and precision and badge type passive sampler is used for the measurement of So2 and No2 in pohang, Kunsan, Daejeon industral complex monthly. Concentration and spatial distribution survey are presented during 1 years. For So2 and No2 passive sampler, we made additional two blank samplers for each compound with the passive samplers for the actual measurement. The results of blank test shows that No2 is 0.29ppb, So2 is 0.55ppb on basis of the month. Using the results measured at the same places as TMS (telemetering system) sites, the accuracy of the passive sampler could be checked. The measurement data with passive sampler was time weighted average concentration for a month. So, it might be difficult to compare two data directly. Althought the correlation between the results of passive sampler and TMS data were not appeared so high, the applicability of passive sampler would be acceptable considering that these data were produced in uncontrolled experiment environment. Monthly variations of average So2 concetration in three industrial complex areas was compared. The average So2 concentration in Pohang and Kunsan area was appeared to be higher than Daejeon area because Pohang and Kunsan area is much bigger than Daejeon area in the magnitude of industrial complex. Also Pohang area was apperad to be higer than Kunsan area because the measurement data in Pohang area included the data inside the factory's lot, Also, the Comparison of NO2 concentration in each sit shows that NO2 near busy road is higher than residential area and industrial area. It is considered that the measurement of air pollutant using passive sampler is suitable for the areas such as industrial complex widely.

cone beam형 전산화 단층촬영장치를 이용한 절치관의 연구

김규태,황의환,이상래 大韓口腔顎顔面 放射線學會 2004 Imaging Science in Dentistry Vol.34 No.1

Purpose : To investigate the anatomical structure of the incisive canal radiographically by a cone beam computed tomography. Materials and Methods : 38 persons (male 26, female 12) were chosen to take images of maxillary anterior region in dental CT mode using a cone beam computed tomography. The tube voltage were 65, 67, and 70 kVp, the tube current was 7 mA, and the exposure time was 13.3 seconds. The FH plane of each person was parallel to the floor. The images were analysed on the CRT display. Results : The mean length of incisive canal was 15.87mm±2.92. The mean diameter at the side of palate and nasal fossa were 3.49 mm±0.76 and 3.89 mm±1.06, respectively. In the cross-sectional shape of incisive canal, 50% were round, 34.2% were ovoid, and 15.8% were lobulated. 87% of incisive canal at the side of nasal fossa have one canal, 10.4% have two canals, and 2.6% have three canals, but these canals were merged into one canal in the middle portion of palate. The mean angles of the long axis of incisive canal and central incisor to the FH plane were 110.3˚±6.96 and 117.45˚±7.41, respectively. The angles of the long axis of incisive canal and central incisor to the FH plane were least correlated (r = 0.258). Conclusion : This experiment suggests that a cone beam computed radiography will be helpful in surgery or implantation on the maxillary incisive area.

CAM-Shift 알고리즘을 이용한 MPEG-4 Visual의 VOP(Video Object Plane) 추출

황의성,정재진,김태형,김두영 동아대학교 정보기술연구소 2006 情報技術硏究所論文誌 Vol.14 No.1

MPEG-4 for an object base coding after extracting the region from image, the coding for a real-time requirements is quick and must be accurate. The object crisis algorithms of existing calculation quantity are many and with image transformation or video conferencing system to same real-time application they are not suitably. The object real-time tracking it tried to apply the CAM-Shift algorithm which is possible from the dissertation which it sees consequently. Tracking the object which it moves or wants the VO where (Video Object) tracking the user wants in bounding box form defines the object where is started. Tracking the object of after uses a CAM-Shift algorithm and are extracted and the VOP with the VO which it is composed. It defines one bounding box with the method which is proposed consequently about lower only one VOP there to be it will be able to compose, it becomes.

차량의 방송 수신 전파 환경 분석에 관한 연구

김의태,김성철,이중근,양승완,전인학 漢陽大學校 工學技術硏究所 2001 工學技術論文集 Vol.10 No.-

본 논문에서는 이동 중인 차량의 수신 성능에 영향을 주는 전파 환경 측정을 위한 측정 셋업을 구성하고, 측정 결과 분석을 통한 수신 이상 현상의 원인을 밝혔다. 이를 위해 필요한 측정 파라메터의 정량적 설정과 측정 및 분석 방법을 제시하였다. In this paper we constitute the measurement setup of electromagnetic environment which has an effect on the radio receiver of vehicles an analyzed causes. This paper proposes various measurement and analysis methods for uncovering noise mechanism of vehicle receiver system.