http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Hyeon-Ho Hwang (검색결과 655 건)
- 무료
- 기관 내 무료
- 유료
-
황우채,김정호,서현경,양인영 朝鮮大學校 機械技術硏究所 2007 機械技術硏究 Vol.10 No.1
자동차를 설계하는 가장 중요한 목적은 현제 환경 친화적인 면과 안전수행 측면에 초점이 맞춰져있다. 경량화 자동차 생산의 전반적인 움직임에 있다 환경친화적인 면과 경제적 측면 때문에 자동차생산에서 경량화에 초점이 맞춰져 있다. 본 연구에서는 사각 단면의 압궤 특성을 고려하여 모자형 단면 부재의 에너지흡수와 압궤특성을 분석하였다. 축 정적 압궤테 스트가 각각의 시험편에 대해여 행하여졌다 각각의 부재들의 에너지홉수와 압궤 모드가 분석되었다. 시험편은 알루미늄 사각부재,CFRP 사각부재,Hybrid 사각부재,CFRP 모자형 단면 부재와 Hybrid 모자형 단면 부재가 사용 되었다. 경량화 측면에서 각각의 부재들의 에너지흡수와 압궤특성이 비교 분석 되었다. The most important purpose in designing automobile is currently focus on environment-friendly, safety performance aspect. As for the environment-friendly and economical aspect, the Issues are the overall movements toward lightweight automobile production. In this study ,based on the collapse characteristics of square section member, the collapse characteristics and energy absorption capability of hat-shaped section members were analyzed. The axial static collapse tests were performed for each section members. The collapse modes and the energy absorption capability of the each section member were analyzed. The square sectional members which were composed of the aluminum. CFRP and hybrid were used and hat-shaped sectional members which were composed of the CFRP, hybrid were used by the specimens. In the lightweight design aspect, the collapse characteristics and energy absorption capability of the each member were compared and they were analyzed.
-
김현영,이성배,임철홍,이권섭,정용현,이종성,한정희,전윤석,황호순,이용묵 한국산업위생학회 2003 한국산업보건학회지 Vol.13 No.1
The CrO3 mostly used in plating. metal surface disposal, leather, cosmetic manufacturing, as an experiment material by repeatedly inhaling and exposure the male S.D. rats at a 0.00, 0.2., 0.50, 1.25 mg/㎡ concentration(particle size: 0.5-0.5 aerosol)6hours a day, 5day a week in 13weeks comparing with 2weeks, 8weeks of recovery group about the noxiousness of the experiment animal and the reduce scale of the CrO3 in the internal organ especially in blook and respiratory organ with the period of convalescent and clearance. The experiment results which we received are as follows. 1. In blood the RBC, HGB and HCT experiment, rats with 0.20, 0.50 mg/㎡ concentration showed that there were some decreases but not dependent. The kidneys absolute weight compared with control group was reduced intentionally(p〈0.05) and the lungs absolute weight compared with control group showed intentional increase(p〉0.05). 2. After the exposure of the experiment material, the whole blook, l\blood plasma and red blood cell in blood by (x): the period of convalescent, per (y); the decreasing of Cr concentration, was y=66.51 e -0.057x, y=67.2 e-0.101x, y=70.01 e-0.030 in 0.50 mg/㎡ exposure concentration by calculating the clearance coefficient of correlation, and the half life (day)was estimated 12.0, 6086, 23.0 each. 3, After the exposure of the experiment material, the experiment animals lung, liver and kidneys by(x); the period of convalescent, per (y); the decreasing of Cr conentration, was y=1808 e-0.00493x, y=12.02e-0.0297x, y=67.61 e-0.0292x in 0.50mg/㎡ exposure concentration by calculating the clearance coefficient of correlation, and the half life(day)was estimated 140.6, 23.3, 23.7, each, and including lung, liver with all of the experiment internal organs, the Cr clearance decreased as the exposure concentration increased.
-
窒素, 燐酸 및 加里의 施肥水準이 藥用作物 仙鶴草(Agrimonia pilosa L.)의 生育 및 收量에 미치는 影響
김현경,황필성,이용호,김기영,정대수 東亞大學校 大學院 2000 大學院論文集 Vol.25 No.-
This study was carried out to determine the effect of various fertilizer levels on the growth and yield of Agrimony. this experiment was conducted for 2years from 1998 to 1999 in Medicinal Plant Experiment Station, Kyungnam ARES. The results obtainned were summarized as follows : 1. The growth characteristics such as plant height, tillers and leaf numbers were more increased at 22-10-10 plot than of other fertilizer levels. 2. Variations of percent flowering of Agrimonia pilosa L. treated with different fertilizer levels were more increased at 22-10-10 plot than of other fertilizer levels. 3. Yield per 10a of Agrimonia pilosa L., Fresh weight was 1,500kg in 22-10-10 plot, and 243kg in non-treatment plot. The dry weight was 736kg in 22-10-10 plot, and 96kg in non-treatment plot. Yield of Seed and Fruit following to different application levels was highest at the fertilizing plot of N, P2O5, K2O=22-10-10.
-
한성호,황현식 전남대학교 치과대학 1999 전남치대논문집 Vol.11 No.1
This study was performed to compare and analyze the mode of tooth movement according to the timing of orthodontic force application after extraction. The upper right and left third incisors were carefully extracted at three-week interval in four adult dogs. Both canines were used as an anchorage for the bodily movement of the upper second incisors. Orthodontic force of 100 gm was simultaneously applied at one week after extraction on one side and four weeks after extraction on the other side using NiTi closed coil spring. While orthodontic force was applied for twelve weeks, the amount of tooth movement was measured at every second week with digital calipers. The animals were sacrificed at twelve weeks and histologic examination was executed to reveal any difference between both sides. The results were obtained as follows; 1. The tooth movement was faster in four-week side than one week side for the first two weeks while faster in one-week side during next two weeks 2. The rate of tooth mevement was fastest during four to six weeks period, then decreased gradually. 3. The total amount of tooth movement tended to be larger in one-week side compared to four-week side. 4. Any damage to tooth and periodontal tissue could not be seen in the histologic section of one-week side. These results suggest that earlier application of orthodontic force is better than later after extraction in terms of the rate of tooth movement.
-
한성호,황현식 대한치과교정학회 2000 대한치과교정학회지 Vol.30 No.1
본 연구는 발치 후 인접치 이동을 위한 교정력 적용 시 적용 시기에 따른 치아이동 양상을 비교·분석하기 위하여 시행되었다. 성견을 실험대상으로 상악 좌우 제 3절치를 3주 간격으로 각각 발거하고, 양 견치를 고정 원으로 제 2절치의 치체이동을 위한 장치를 장착하였다. 100 gm의 지속적인 힘을 내는 견인 스프링을 사용하여 발치 후 4주와 1주부터 좌우 제 2절치를 각각 12주간 동시에 견인하였다. 2주 간격으로 디지털 캘리퍼스를 이용하여 이동거리를 측정·비교하고 실험에 사용된 좌우 제 2절치의 조직소견을 관찰하여 다음과 같은 결론을 얻었다. 1.교정력 적용 후 처음 2주간에는 발치 후 4주에 견인한 치아가, 그 다음 2주간에는 발치 후 1주에 견인한 치아가 빠르게 이동하는 양상을 보였다. 2.12주간의 실험기간 동안 견인 4주와 6주 사이에 가장 빠르게 이동하는 경향을, 이 후에는 이동 속도가 감소하는 양상을 보였다. 3.실험기간 동안 이동한 전체 거리는 발치 후 4주에 비해 1주에 견인한 경우에서 크게 나타나는 경향을 보였다. 4.발치 후 4주에 견인한 경우에 비하여 1주에 견인한 경우에서 유해한 조직소견이 나타나지 않았다. 이상의 결과는 발치 후 교정력 부여 시 조기 적용이 유리함을 시사하였다. This study was performed to compare and analyze the mode of tooth movement according to the timing of orthodontic force application after extraction. The upper right and left third incisors were carefully extracted at three-week interval in four adult dogs. Both canines were used as an anchorage for the bodily movement of the upper second incisors. Orthodontic force of 100 gm was simultaneously applied at one week after extraction on one side and four weeks after extraction on the other side using NiTi closed coil spring. While orthodontic force was applied for twelve weeks, the amount of tooth movement was measured at every second week with digital calipers. The animals were sacrificed at twelve weeks and histologic examination was executed to reveal any difference between both sides. The results were obtained as follows : 1.The tooth movement was likely to be faster in four-week side than one-week side for the first two weeks while faster in one-week side during next two weeks 2.The rate of tooth movement was fastest during four to six weeks period, then decreased gradually. 3.The total amount of tooth movement was likely to be larger in one-week side compared to four-week side. 4.Any damage to tooth and periodontal tissue could not be seen in the histologic section of one-week side. These results suggest that earlier application of orthodontic force is better than later after extraction in terms of the rate of tooth movement.
-
강정호,김규태,최용석,이현우,황의환 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.3
Purpose : To observe and evaluate the effects of Simvastatin-induced osteogenesis on the wound healing of defective bone. Materials and Methods : 64 defective bones were created in the parietal bone of 32 New Zealand White rabbits. The defects were grafted with collagen matrix carriers mixed with Simvastatin solution in the experimental group of 16 rabbits and with collagen matrix carriers mixed with water in the controlled group. The rabbits were terminated at an interval of 3, 5, 7, and 9 days, 2, 4, 6, and 8 weeks after the formation of defective bone. The wound healing was evaluated by soft X-ray radiography. The tissues within defective bones were evaluated through the analysis of flow cytometry for the manifestation of Runx2 and Osteocalcin, and observed histopathologically by using H-E stain and Masson’s trichrome stain. Results : 1. In the experimental group, flow cytometry revealed more manifestation of Runx2 at 5, 7, and 9 days and Osteocalcin at 2 weeks than in the controlled groups, but there was few difference in comparison with the controlled group. 2. In the experimental group, flow cytometry revealed considerably more cells and erythrocytes at 5, 7, and 9 days in comparison with the controlled group. 3. In the experimental group, soft x-ray radiography revealed the extended formation of trabeculation at 2, 4, 6, and 8 weeks. 4. Histopathological features of the experimental group showed more fibroblasts and newly formed vessels at 5 and 7 days, and the formation of osteoid tissues at 9 days, and the newly formed trabeculations at 4 and 6 weeks. Conclusion : As the induced osteogenesis by Simvastatin, there was few contrast of the manifestation between Runx2 and Osteocalcin based on the differentiation of osteoblasts. But it was considered that the more formation of cells and erythrocytes depending on newly formed vessels in the experimental group obviously had an effect on the bone regeneration.
-
양용준,황우채,서현경,김정호,심재기,양인영 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
In this study, concerns the crashworthiness of the widely used vehicle structure, square thin-walled tubes, which are excellent on the point of the energy absorbing capacity. An experimental investigation was carried out to study the energy absorption characteristics of thin-walled square tubes subjected to dynamic crushing by axial loading to develop the optimum structural members. The impact velocity was tested in the rage 4.698~8.2m/s. To efficiently review the collapse characteristics of these sections, the simulation have been carried out using explicit FEM package, LS-DYNA. The solutions compared with results the impact collapse experiment. Here, the controller are introduced to improve and control the absorbed energy of thin-walled square tubes in this paper. To predict and control the energy absorption, we designed it in consideration to the it's influence, height, thickness, wide ratio in this study. When the controller used, the experimental results of crushing of square tubes controlled by the controller's elements showed a good candidate for a controllable energy absorption capability in impact axial crushing.
-
-
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
