경관지수를 활용한 식생군락 모자이크화 분석법

이상훈,정종철,Lee, Peter Sang-Hoon,Jeong, Jong-Chul 한국국토정보공사 공간정보연구원 2017 지적과 국토정보 Vol.47 No.1

한국 국토의 60% 이상을 차지하고 있는 산림지역에 대한 개발과 이용의 수요가 증가하고 있지만, 개발사업의 허가는 산림생태계의 보전보다는 국토 이용 중심의 평가로 이루어지고 있다. 대규모 산림지역을 평가할 경우 산림의 구조를 중심으로 분석하기 때문에 산림 내부의 변화를 관찰하고 분석하는데 한계가 있다. 따라서 본 연구에서는 충청남도 식생군락의 현존식생도와 FRAGSTATS 4.2를 이용하여 경관지수를 산출하고 식생 모자이크를 분석해 보았다. 식생 군락은 주요 자생 수종을 중심으로 대표군락과 세부군락으로 구분하였고, 군락별 차이를 분석하기 위해 분포면적(CA), 분포면적비율(PLAND), 패치개수(NP) 등의 10가지 경관지수가 선택되었다. 충청남도 식생의 대표군락과 세부군락은 소나무군락, 상수리나무군락 및 소나무와 참나무류 수종의 조합이 우세하게 나타났으며, 소나무군락의 면적이 상당히 높게 나타났다. 소나무군락과 참나무류군락의 경쟁의 경우, 대표군락의 경우 소나무군락이 전체 분포면적은 3배 가량 넓으나 작은 패치로 나뉘어져 모자이크화 정도는 참나무류 군락이 작은 것으로 판단되었다. 세부군락의 경우에는 소나무 중심의 군락에서는 소나무-신갈나무군락이, 상수리나무 중심 군락에서는 상수리나무군락이, 굴참나무 중심의 군락에서는 굴참나무-소나무군락이, 신갈나무 중심의 군락에서는 신갈나무군락이, 곰솔 중심의 군락에서는 곰솔군락이, 졸참나무 중심의 군락에서는 졸참나무-상수리나무군락이 넓은 분포면적과 동시에 모자이크화도 심한 것으로 나타났다. 전체적인 모자이크화 양상은 수치로 표현될 수 있어 모니터링 단계에서 문제가 있는 식생군락을 판별할 때 유용할 것으로 판단되었다. 모자이크화의 원인과 천이의 방향성 예측을 통한 관리 방안 마련을 위해서는 각 군락의 생태적인 특성에 대한 연구가 추가적으로 필요할 것으로 판단되었다. Whereas the demand for development of forested areas covering more than 60% of Korean territory, permission on the forest development has been still given from the perspective of effective land utilization rather than conservation. As the assessment of large forested areas usually focuses more on forest structure, it has its limitation of observing and analyzing the interior change in forest in this way. This study was aimed at computing landscape metrics using a presence vegetation map and FRAGTSTATS 4.2 and analyzing vegetation mosaics. Colonies in native vegetation were classified into a series of major groups and sub-groups based on the native species within the colonies. The colonies were investigated by analyzing a suite of landscape metrics - Core Area, Percentage of Landscape, Number of Patches, Patch Density, Largest Patch Index, Total Edge, Edge Density, Landscape Shape Index, Mean Patch Area, Euclidean Nearest Neighbor. In the Chungnam province major groups and sub-groups of colonies classified based on the proportion of pine and oak species, and pine species was the principal one in terms of distribution area. As for the competition between pines and oaks, while the coverage of pine-centered colonies were three times larger than those of oak-centered ones, pine colonies showed the greater number of patches and therefore higher fragmentation than oaks at the major group level. For the sub-groups, the largest coverage colonies were not only indicated by Pinus densiflora-Quesrcus mongolica colonies among P. densiflora-centered colonies, Q. accutissima colonies among Q. accutissima-centered ones, Q. accutissima-P. densiflora colonies among Q. accutissima-centered ones, Q. mongolica colonies among Q. mongolica-centered ones, P. thumbergii colonies among P. thumbergii-centered ones, and Q. serrata-Q. acutissima colonies among Q. serrata-centered ones, but also revealed more severely mosaicked than other smaller colonies. The overall mosaicking degree estimated by landscape metrics was considered useful for monitoring and investigating vegetation. However, in order to develop management strategy based on analyzing the reason for the mosaicking process and anticipating a trend in vegetation succession, it is essential to further study about ecological characteristics of each colony in the vegetation.

국내육성 톨 페스큐 품종간 생육특성 및 종자생산성

이상훈,최기준,김기용,지희정,황태영,박형수,김종근,이기원,Lee, Sang-Hoon,Choi, Gi Jun,Kim, Ki-Yong,Ji, Hee Chung,Hwang, Tae Young,Park, Hyung Soo,Kim, Jong Gun,Lee, Ki-Won 한국축산환경학회 2014 한국축산시설환경학회지 Vol.20 No.4

A new tall fescue variety (Festuca arundinacea Schreb.) named Greenmaster and Purumi were. In this study, we evaluated the seed production of new tall fescue domestic varieties were cultivated in Korea. Agronomic aspects of tall fescue domestic varieties were determined using seed production and forage nutritive value of straw at the National Institute of Animal Science from 2013 to 2014. The heading date according to the varieties displayed differences and domestic varieties showed enhanced disease resistance. The harvested seed yields of Greenmaster was 35% higher as 1,664 kg/ha and it's also yield of straw higher than that of Fawn. However, the nutritive value of both varieties was similar. The dry matter yield of Pumumi was 25% higher as 11,080 kg/ha. Accordingly, developed a new variety of domestic tall fescue with excellent environmental adaptability, aiming to make contribution to the vitalization of the Korean grassland industry.

방골성 골육종의 생존분석

이상훈,이창섭,이한구,김석준,Lee, Sang-Hoon,Lee, Chang-Seop,Lee, Han-Koo,Kim, Sug-Jun 대한근골격종양학회 1995 대한골관절종양학회지 Vol.1 No.1

The prognosis of parosteal osteosarcoma is better than any other malignant bone tumors, but there are many controversies in its treatment. We tried to evaluate the prognosis and the effectiveness of limb-salvage operation in the treatment of the parosteal osteosarcoma. We experienced 12 patients of conventional parosteal osteosarcoma(2 males and 10 females) from 1981 to 1991. The limb-salvage operations with wide resection margin were done in 8 patients(5 tumer prosthesis, 2 resection arthrodesis and 1 vascularized fibular transplantation), marginal en-bloc resection and amputation in 2 patients, respectively. The duration of mean follow up was 5 years and 9 months, ranging from 2 year-3 months to 11 years, except of the patient who died with metastasis 1 year 8 months after. The disease-free survival rate(DFSR) of all patients was 68% and that of the patients treated with limb-salvage operation was 88% at 7 years. The DFSR was 33% with marginal margin(3 cases) and 89% with wide margin(9 cases) at 7 years. The results were unsatisfactory in the conventional parosteal osteosarcoma treated with marginal resection. The limb-salvage operation with wide surgical margin was thought to be the treatment of choice.

휴폭 및 이른 봄 질소시비량에 따른 국내육성 톨 페스큐의 종자생산성

이상훈,김기용,지희정,황태영,박형수,이기원,Lee, Sang-Hoon,Kim, Ki-Yong,Ji, Hee Chung,Hwang, Tae Young,Park, Hyung Soo,Lee, Ki-Won 한국초지조사료학회 2015 한국초지조사료학회지 Vol.35 No.2

In this study, we sought to evaluate the growth characteristics and seed productivities of domestic tall fescue that were cultivated with differing combinations of drill widths and nitrogen-application rates in early spring; the examination was conducted at the National Institute of Animal Science, RDA, from 2013 to 2014. The main plots were three widths of 15 cm, 30 cm, and 45 cm, and the subplots were subject to nitrogen-application rates in early spring of 45 kg/ha, 90 kg/ha, 135 kg/ha, and 180 kg/ha. The growth and development characteristics did not vary by treatment in terms of drill width and early-spring nitrogen application. Tall fescue Purumi showed a stable seed productivity of two tons or greater when the drill width was set at 15 cm and 90 kg/ha of nitrogen was applied in early spring. The narrower the drill width, the greater the numbers of both the ears and seeds, while the length of the ear was longer when the drill width was wider. Regarding the influence of the drill width and early-spring nitrogen application on the productivity of seed-producing straw, the dry matter productivity was higher when the drill width was narrower; however, no particular trend was observed with respect to different amounts of fertilizer. The average production amount of the first round of straw after seed gathering was 6,920 kg/ha. The second round produced an average 8,134 kg/ha of dry matter. 국내육성 톨 페스큐 신품종 푸르미의 종자생산 기술개발과 채종짚의 사료가치 평가를 통해 국내에서 종자생산 체계를 확립하고자 국립축산과학원 초지사료과 시험포장에서 휴폭과 이른 봄 질소 시용량에 따른 종자생산성을 조사하였다. 휴폭 및 이른 봄 질소 시용량에 따른 주요 생육특성은 처리에 따른 차이는 나타나지 않으나 경제성을 고려한 국내육성 톨 페스큐 푸르미 품종의 종자생산성은 휴폭을 15 cm와 이른봄 질소시비량을 90 kg/ha로 처리하는 것이 2톤 이상 안정적인 종자생산을 할 수 있었다. 또한 휴폭이 좁을수록 이삭수 및 종자수량이 높게 나타났으며 이삭의 길이는 휴폭이 넓을수록 더 길었다. 채종종자의 첩립중은 약 2.2g, 발아율은 90% 내외로 나타났다. 휴폭 및 이른 봄 질소 시용량에 따른 채종짚의 생산성은 휴폭이 좁을수록 건물생산성이 높았으나 시비량간에는 일정한 경향이 없었다. 채종후 남은 1차 수확 채종짚은 평균 6,920 kg/ha 생산되었고, 채종 후 2번의 수확에서 건초는 평균적으로 8,134 kg/ha 생산되었다. 채종짚의 일반 조성분 함량은 양질의 건초보다는 다소 낮은 사료가치를 나타내었다.

봉독약침이 류마티스 관절염 환자의 관절 통증, 종창 및 급성 염증 반응에 미치는 영향

이상훈,이현종,백용현,김수영,박재경,홍승재,양형인,김건식,이재동,최도영,이두익,이윤호,Lee, Sang-hoon,Lee, Hyun-jong,Baek, Yong-hyeon,Kim, Su-young,Park, Jae-kyung,Hong, Seung-jae,Yang, Hyung-in,Kim, Keon-sik,Lee, Jae-dong,Choi, Do-young,L 대한침구의학회 2003 대한침구의학회지 Vol.20 No.2

Objective : In order to study the effects of bee venom(BV) on the pain, edema, and acute inflammatory reactant of rheumatoid arthritis(RA) patients. Methods : Patients with RA who met the ACR(American College of Rheumatology) 1987 revised criteria for the diagnosis of RA were treated with the BV therapy twice a week for 3 months. Tender joint counts, swollen joint counts, Visual analog scale(VAS), morning in stiffness, ESR, C-reactive protein(CRP) were analyzed before and after BV therapy. Results : The results as follows: 1. Tender joint counts in patients after BV therapy were significantly lower than those before BV therapy($9.0{\pm}7.9$ vs $15{\pm}11.4$, p=0.002). 2. Swollen joint counts of the patients after BV therapy were significantly lower than those before BV therapy ($5.0{\pm}6.1$ vs $1.5{\pm}2.3$, p=0.001). 3. VAS in patients after BV therapy was significantly lower than before BV therapy($60.8{\pm}17.6$ vs $38.0{\pm}15.9$, p=0.000). 4. Duration of morning stiffness in patients after BV therapy was significantly reduced compared with that before BV therapy($119.1{\pm}112.6min$ vs $59.0{\pm}89.7min$, p=0.009). 5. ESR and CRP were not significantly changed before and after BV therapy, suggesting BV itself could make inflammatory reaction as well as therapeutic effect. Conclusions: BV therapy improved tender joint counts, swollen joint counts and duration of morning stiffness in this study, and further study is needed in log-term effect of BV therapy.

코발트-크롬 합금의 표면처리에 따른 열중합형 의치상용 레진과의 전단결합강도

이상훈,황선홍,문홍석,이근우,심준성,Lee, Sang-Hoon,Hwang, Sun-Hong,Moon, Hong-Seok,Lee, Keun-Woo,Shim, June-Sung 대한치과보철학회 2007 대한치과보철학회지 Vol.45 No.2

Statement of problem: For the long-term success of removable partial dentures, the bonding between metal framework and denture base resin is one of the important factors. To improve bonding between those, macro-mechanical retentive form that is included metal framework design has been generally used. However it has been known that sealing at the interface between metal framework and denture base resin is very weak, because this method uses mechanical bonding. Purpose: Many studies has been made to find a simple method which induces chemical bond, now various bonding system is applied to clinic. In this experiment, shear bond strengths of heat-cured denture base resin to the surface-treated Co-Cr alloy were measured before and after thermocycling. Chemically treated groups with Alloy $Primer^{TM}$, Super-Bond $C&B^{TM}$, and tribochemically treated group with $Rocatec^{TM}$ system were compared to the beadtreated control group. The data were analyzed with two-way ANOVA. Result: 1. Shear bond strength of bead-treated group is highest, and Alloy $Primer^{TM}$ treated group, Super-Bond $C&B^{TM}$ treated group, RocatecTM system treated group were followed. Statistically significant differences were found in each treated group(p<0.05). 2. Surface treatment and thermocycling affected shear bond strength(p<0.05), however there was no interaction between two factors(p>0.05). 3. Shear bond strengths of bead-treated group and Alloy $Primer^{TM}$ treated group showed no statistically significant difference before and after thermocycling(p>0.05), and those of Super-Bond $C&B^{TM}$ treated group and $Rocatec^{TM}$ system treated group showed statistically significant difference after thermocycling(p<0.05).

우주환경하의 위성부품용 압전진동자 활용에 관한 연구

이상훈,문귀원,유성연,Lee, Sang-Hoon,Moon, Guee-Won,Yoo, Seong-Yeon 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.6

위성체가 작동하는 우주환경인 초고진공상태에서는 각 부품에서 발생 할 수 있는 기체방출로 인해 위성체가 오염되어 위성체의 성능이 저하될 수 있으며, 특히 광학렌즈를 오염시킴으로써 위성체 본연의 임무수행 실패라는 결과를 초래할 수도 있다. 최근 항공우주분야에서 활용 범위가 넓어지고 있는 PZT-5 계열 압전진동자의 위성부품 활용성 연구를 위하여 먼저 Collected Volatile Condensable Material 및 Total Mass Loss을 측정하여 규정된 0.1% 및 1.0% 이하의 값을 얻었고, 한국항공우주연구원에 설치된 베이크아웃(bake-out) 챔버를 이용하여 고온 및 고진공상태에서 500 $ng/cm^2/hr$ 이하의 낮은 Thermoelectric Quartz Crystal Microbalance 값을 얻어 위성체 부품으로의 적합성을 재확인하였다. 압전진동자에 대한 고진공 환경 전후의 압전 특성을 비교 분석한 결과 진공환경에 의한 전기-기계적 특성은 1% 미만으로 큰 변화가 없음을 확인하였다. In the high vacuum condition of the space, outgassing from any assembly of satellite can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. Therefore, all unit shall be check for compatibility with vacuum using CVCM (Collected Volatile Condensable Material) and TML (Total Mass Loss) in advance. CVCM and TML of the PZT-5 piezoelectric ceramic vibrator has less than 0.1% and 1.0% respectively. Also, it has less than 500 $ng/cm^2/hr$ of Thermoelectric Quartz Crystal Microbalance for vacuum bake-out test using high temperature(more than $80^{\circ}C$) and high vacuum (less than $5.0{\times}10^{-3}$ Pa). Thus, piezoelectric ceramic vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric ceramic vibrator is less than 1% under vacuum environments.

2중 적응제어방식에 의한 전치환 인공심장의 전부하에 민감한 심박출량 조절

이상훈,김인영,안혁,민병구,Lee, Sang-Hoon,Kim, In-Young,Ahn, Hyuk,Min, Byoung-Goo 대한의용생체공학회 1993 의공학회지 Vol.14 No.1

This paper proposes an adaptive technique for the cardiac output regulation of a pendulum type electromechanical TAH. This techinque, which consists of two RLSE's and two PASTC' 5, performs Its controllability over the TAIB so that the m(RAP) and m(LAP) values re- main close to their desired values under she assumption that the variation of m(RAP) and m (LAP) are dominated by the variation of C.0. and the difference between the left and right ventricular output, respectively. To evaluate the performance of the proposed control system, a simulation is performed by using a human model which contains physiologic, drug and treatment, artificial heart and noise models. As a result, dual adaptive controller showed that abnormal m(LAP) and m(RAP) could be recovered to the normal range within 10minute and maintained desired value in steady state. The operation of this controller prored to be robust in spite of the rapid variation of human status.

외측 원판형 연골 전각부의 전방십자인대 전방부로의 부착변형에 관한 증례보고

이상훈,이승림,노정호,류호광,Lee, Sang-Hoon,Yi, Seung-Rim,Noh, Jung-Ho,Ryu, Ho-Kwang 대한관절경학회 2009 대한관절경학회지 Vol.13 No.2

The lateral meniscus is morphologically more variable than the medial meniscus. An abnormal lateral meniscus also varies with respect to its size, shape and stability, and such variations can occur in any patient of any age. The most common variant is a discoid lateral meniscus. We recently encountered a patient with a discoid lateral meniscus for which the anterior horn of the meniscus was anomalously inserted into the anterior ACL. The patient was forty five years old women who had persistent pain for three to four years without any specific trauma history. She was preoperatively diagnosed as having discoid lateral meniscus by MRI, and was confirmed the presence of the complex tear and anomalous insertion of the anterior horn of the discoid lateral meniscus into the anterior ACL by arthroscopic examination. Arthroscopic subtotal meniscectomy was performed and the symptoms were improved after surgery. 외측 연골은 형태적으로 내측 연골보다 더 다양하다. 외측 연골의 변이형태는 크기, 형태, 안정성 관점에서 다양하다. 다양한 형태는 모든 연령층에서 발생할 수 있으며, 가장 흔한 형태는 외측 원판형 연골이다. 저자들은 최근 반월상 연골의 전각부가 전방십자인대의 전방부에 부착되어 있는 변형이 동반된 외측 원판형 연골을 경험하여 보고하고자 한다. 45세 여자 환자로 특별한 외상력없이 3~4년간 슬관절 동통을 호소하였으며, 자기공명영상 검사상 외측 원판형 연골로 진단되었다. 관절경 검사상에서는 반월상 연골의 전각부가 전방십자인대의 전방부에 부착되어 있는 변형이 동반된 완전형 외측 원판형 연골로 복합파열이 동반되어 있어 아전절제술을 시행하였으며, 술 후 증상의 호전이 관찰되었다.

우주 환경에서 GHTAW 아크 특성과 용융지 해석에 관한 연구

이상훈,나석주,Lee, Sang-Hoon,Na, Suck-Joo 대한용접접합학회 2010 대한용접·접합학회지 Vol.28 No.4

The purpose of this paper is to understand the behavior of GHTAW process under the space environment with the experimental and numerical analysis. Gas Hollow Tungsten Arc Welding (GHTAW) using a hollow tungsten electrode was adopted, since the ignition and discharge of a conventional GTAW process is not appropriate to the space environment due to low pressure in space. In order to clarify the phenomena of GHTAW under space environment, an investigation of thermal and physical properties of the GHTAW arc plasma was experimentally performed under low pressure conditions. Furthermore, the molten pool behavior and weldment of GHTAW were understood by CFD-based numerical analysis, based on the models of GHTA heat source, arc pressure and electromagnetic force induced by arc plasma, the characteristics of which were obtained by the captured images of a CCD camera.