http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최영균 ( Younggyun Choi ),샌피에롬 ( Phearom San ),무하마드카시프 ( Muhammad Kashif ) 한국물환경학회(구 한국수질보전학회) 2018 한국물환경학회·대한상하수도학회 공동 춘계학술발표회 Vol.2018 No.-
본 연구에서는 밀스케일의 전처리를 통해 얻은 산화철 입자를 활용하여 ferrite 입자를 합성한 뒤 비소흡착실험에 활용하였다. 제철소로부터 확보한 밀스케일 입자는 1차 정제 및 전처리 과정을 통해 불순물 (오일 및 그리스 등)을 최대한 제거한 뒤 ferrite 입자 가공에 활용하였다. Ferrite 입자는 밀스케일을 농황산을 활용하여 용해시켜 얻은 철전구체 (ferrous precursor)를 0.1N NaOH에 첨가하여 공침반응을 유도함으로써 얻을 수 있었다. 또한 이렇게 합성된 입자의 ferrite 입자 함량은 Q-XRD 분석결과 95%이상인 것으로 확인되었다. 칼럼형 반응기는 일처리용량 5L 내외로서 유입 비소 농도 500ppb, 칼럼체류시간 (EBCT, Empty Bed Contact Time) 0.5-1.0시간을 기준으로 하여 운전하였다. 칼럼 내부 ferrite 입자의 충전부피는 약50cm<sup>3</sup>이었고, 충전량은 120-150g 내외였다 (ferrite 입자 겉보기 비중: 약 2.5g/cm<sup>3</sup>). Ferrite 입자의 비소흡착용량을 3mgAs/g으로 설정하고 제거율을 90%로 가정하였을 경우, EBCT 0.5시간으로 운전하면 약 350일간 파과 없이 칼럼을 이론적으로 운영할 수 있는 것으로 확인되었다. 그러나 실제 운전결과 이론적 파과시점에비해 10%도 안되는 시점에 파과가 발생하여 칼럼 내부의 channeling 현상이 심각한 것으로 나타났다. 이에 따라 칼럼의 길이:직경의 비율을 기존 3:1에서 10:1로 변경하여 운전하였다. 이러한 칼럼의 설계 형상 변경은 channeling의 대폭적인 감소로 나타나 추후 현장 적용시 디자인 요소를 중요하게 고려해야 하는 것으로 확인되었다. 디자인을 변경한 칼럼반응기 운전결과 처리수의 비소농도는 USEPA 기준인 10ppb(10㎍As/L)를 안정적으로 만족하는 것으로 확인되었고 파과없이 5000BV(Bed Volume) 이상 운전할 수 있는 것으로 나타났다.
산화철계 가중응집제가 활성슬러지의 침전성 및 탈수성에 미치는 영향
양혜지,김용범,최영균,Yang, Hyeji,Kim, Yongbum,Choi, Younggyun 대한상하수도학회 2021 상하수도학회지 Vol.35 No.4
The ballasted flocculation effects of the mill scale and magnetite on activated sludge were investigated. Both ballasted flocculants (BF) could remarkably improve the sludge settleability in terms of zone settling velocity (ZSV) and sludge volume index (SVI). With the BF dosage of 0.2 to 2.0 g-BF/g-SS, the magnetite particles showed better efficiency on improving settling behavior of activated sludge than the mill scale due to higher surface area and hydrophobic property. The efficiency of SVI<sub>30</sub> with magnetite injection was 2.5 to 11.3% higher than mill scale injection and that of the ZSV appreciated from 23.7% to 44.4% for magnetite injection. Averaged floc size of the BF sludge with magnetite dosage (0.5 g-BF/g-SS) was 2.3 times higher than that of the control sludge. Dewaterability of the sludge was also greatly improved by addition of the BF. The specific resistance to filtration (SRF) was reduced exponentially with increasing the dosage of BF. However, the BF's particle size effect on the SRF looks to be marginal. Consequently, for improving the dewaterability, the BF played a physical role to remove the pore water of the biological flocs by intrusive attachment and a chemical role to induce aggregation of the flocs by charge neutralization.
이인(In Lee),최영균(Younggyun Choi),김홍락(Honglak Kim),권오순(Osoon Kwon),윤희정(Heejung Youn) 한국지반환경공학회 2013 한국지반환경공학회논문집 Vol.14 No.5
이 논문에서는 풍력터빈의 기초로 쓰이는 해상말뚝의 횡방향 거동에 대한 말뚝 직경의 영향에 관하여 분석하였다. 지반의 물성값들은 국내 최초로 해상풍력단지 건립 예정후보지인 서남해안의 표준관입시험과 실내시험자료를 이용하였다. 유한차분해석 프로그램(FLAC3D)과 p-y해석프로그램(LPile)을 사용하여 말뚝 두부의 하중-변위관계, 지반의 p-y 곡선, 말뚝에 발생하는 최대 휨모 멘트 등을 말뚝의 직경에 따라 국내·외 허용변위기준을 적용하여 구하였다. 연구 결과 두 프로그램의 결과가 서로 다르게 나타났으며, LPile의 해석결과가 수평허용지지력을 과하게 나타냈다. 직경 2m의 말뚝에서 발생하는 최대 휨모멘트는 직경 1m의 말뚝에 발생하는 최대 휨모멘트보다 약 4배가량 크게 나타났으며, 수평허용지지력에서도 비슷한 경향을 보였다. This paper presents the effect of pile diameter on the lateral behavior of offshore pile for wind turbine. The material parameters of the soils were estimated through SPT on the Southwestern offshore area in Korea, where the first wind farm is planned. The FDM software, FLAC3D, and LPile were adopted to derive the load-displacement curve, p-y curve, and maximum bending moment at a specified displacement. It was found that the results from softwares significantly differ and the LPile could overestimate the allowable capacity. The maximum bending moment along the pile with 2m diameter could be as large as four times the bending moment with 1m diameter. Similar trend was observed for the allowable lateral capacity.