http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
일반연제(구연) : O-8 ; 고체배지법과 액체배지법에 의한 항산균 배양 결과 비교
장의영,임정미,정미심,안효선,최태윤,김양기 대한임상병리사협회 2009 임상미생물검사학회 발표자료집 Vol.2009 No.-
배경: 최근 액체 배지를 이용한 항산균 배양장비의 도입은 기존의 고체배지법 단독 시행보다 배양 소요시간이 단축되고 검출율도 높였지만 한편으로는 오염균의 증가를 가져왔다. 이에 액체배지 추가에 따른 임상적 이득과 손실에 대해 알아보고자 하였다. 방법: 2009년 3월부터 7월까지 순천향대학교병원에 항산균 배양이 의뢰된 719명(1,837 검체)을 대상으로 하였다. 일차결과로는 항산균 양성률과, 발병력이 상대적으로 큰 비결핵 항산균이 차지하는 비율로 하였다. 검체는 5% NaOH(최종농도 1.25%)로 처리한 다음 MGIT 배지와 3% Ogawa 배지에 접종하였고 도말 슬라이드는 Ziehl-Neelsen 염색을 하였다. 배양된 항산균은 Mycobacterium Genotyping Chip(LG 생명과학, 한국)을 이용하여 동정하였다. 두 가지 배양 방법에 따른 양성률, 배양 소요시간, 오염률, 항산균의 균종 분포 등을 조사하여 비교 분석하였다. 결과: 719명의 환자 중 항산균은 고체배지 단독에서 6.8%(49/719), 액체 및 고체배지에서 12.8%(92/719)가 배양되어 액체배지를 추가하였을 때 배양균이 88% 증가하였다. 결핵균 검출율은 49% 증가(35/719->52/719)한 반면 비결핵 항산균 검출율은 186% 증가(14/719->40/719)하였다. 발병력이 상대적으로 큰 M. avium, M. intracellulare, M. abscesus, M. kansasii 가 차지하는 비율은 67.5%였다. 액체배지와 고체배지에서의 균 배양까지의 소요시간은 각각 13.1일과 27.7일이었고 균주에 따른 배양시간의 차이는 없었다. 액체배지의 오염률과 혼합 배양률은 10.9%와 0.5%였다. 액체배지에서 오염된 202 검체 중 결핵균 3건, 비결핵 항산균 1건이 분리되었다. 고찰: 액체배지의 추가는 항산균 검출율 향상 및 배양시간 단축을 가져왔고 결핵균 뿐 만 아니라주로 발병력이 높은 비결핵 항산균들이 배양되었다. 하지만 오염균의 빈도가 적지 않아 이를 보완하기 위해서는 임상소견에 따른 선별적 검사여부와 항산균 배양결과와의 상관관계를 통한 전향적 연구가 필요할 것으로 생각된다.
박정희,장의영,박윤서 한국소음진동공학회 1996 소음 진동 Vol.6 No.4
This paper is concerned with the bubble sound at the accumulator which is generated by the difference of the high pressure side and the low pressure side in the cycle of the refrigerator. The causes of the bubble sound generation are verified by the visualized test of the operating refrigerant flow at the accumulator and the measurements of the temperature and pressure. Two cases were tested, one with the accumulator has a orifice and the other with the accumulator hasn't a orifice. So that, it is presented the comparison of the bubble sound levels and spectrums in each cases. To predict the bubble sizes when they are generated, the linearized equation driven by Strasberg is used.
한 대학병원에서의 혈액배양검사에 대한 질지표 관리 활동
방해인,임현미,장의영,박은수,이은정,김태형,박노진,신정원,최태윤 대한임상미생물학회 2015 Annals of clinical microbiology Vol.18 No.3
Background: Blood culture is a critical test for diagnosing bloodstream infections. Frequent microbial contamination during sampling and testing leads to abuse of antimicrobial agents. We evaluated methods for reducing contamination and obtaining more reliable results. Methods: We analyzed blood cultures obtained between 2009 and 2015. We established 6 quality indicators: true positive rate, contamination rate, blood sampling volume, number of sets of blood cultures, delayed transportation rate, and percentage of samples collected from the femoral region, with reference to the CLSI guideline M47-A, 2007. Education was provided for interns and nurses responsible for blood sampling and transportation of specimens, and data were analyzed monthly. Results: At baseline, the true positive rate was 12.8%, and the contamination rate was 4.0%. During the intervention period, these were decreased to 10.9% and 1.9%, respectively. The percentage of samples smaller than 5 mL decreased from 29.7% to 2.7- 11.3%. The rate of one set of blood cultures being ordered was always <5%. The delayed transportation rate decreased from 35.6% to 5.5-7.7%. Finally, the percentage of samples collected from the femoral region decreased from 41.5% to 22.0-31.0%, because of which we did not attain our goal, 20.8%. Conclusion: The results showed improvements in contamination rate, specimen volume, specimen transportation time, and the percentage of samples collected from the femoral region. The quality management of blood cultures in 2011 was comparatively poor, which led to increased contamination rate, large number of samples containing <5 mL of blood, and increased percentage of samples collected from the femoral region. Thus, quality improvement methods can produce more reliable results of blood cultures. (Ann Clin Microbiol 2015;18:-93)
안지훈(Jihoon Ahn),장용희(Yonghee Jang),김용찬(Yongchan Kim),장의영(Uiyoung Jang),박용종(Yongjong Park) 대한설비공학회 2008 대한설비공학회 학술발표대회논문집 Vol.2008 No.2
Various types of refrigerators become popular in the market such as a common refrigerator, kimchi refrigerator and wine cellar. It is required to develop a multi function refrigerator which has different purposes in each evaporator. In this study, the performance of a multi type refrigerator system, which consists of one machine room and three evaporators, was measured in a bench type multi refrigerator. The multi type refrigerator system was tested by varying the number of refrigerator cabinet, refrigerant charge amount, temperature condition. Based on experimental data, the multi type refrigerator showed better performance than the conventional refrigerator(single type) At the same external load condition, the COP of the multi type refrigerator was 1.22~1.29, but the COP of the single type refrigerator was 1.0.