Validations of a Numerical Model of Solute Transport in a Snowpack

이정훈,Lee, Jeonghoon The Korean Society of Economic and Environmental G 2012 자원환경지질 Vol.45 No.5

겨울철동안 쌓여 봄에 놓은 눈 녹은 물(snowmelt), 즉 융설의 유출은 북반구 및 산간지역에서 매우 중요한 것으로 여겨지고 있다. 이러한 지역에서 융설로 인한 유동 및 이온의 이동에 대한 이해는 매우 중요하며 전세계적으로 꾸준하게 연구되고 있다. Lee et al. (2008a)와 Lee et al. (2008b)연구에서는 대기로부터 수송된 이온 및 오염원이 융설에 의해 눈속을 이동하는 것을 모사하기 위한 Mobile-Immobile water Model (MIM)을 개발하였다. 이 연구에 사용된 모델을 검증하기 위해서 물질수지계산(mass balance calculation) 및 해석해(analytical solution)를 이용한 모델결과와의 비교를 수행하였다. 일정시간동안 눈 속에서의 물질의 질량변화는 눈 표면에서 들어온 물질과 눈 기저부에서 빠져나간 물질의 질량 차이와 같아야한다는 사실을 이용하여 물질수지를 계산하였다. 파면(wave front)의 이동속도 및 기존문헌에서 알려진 해석 해를 이용하여 모델결과와의 비교도 시도하였다. 모델의 물질수지계산결과 질량 차이가 거의 발생하지 않았으며 모델결과와 해석해와의 비교 역시 두 결과가 거의 일치하였다. Snowmelt from seasonal snow covers can be significant in many environments of northern and alpine areas. Water flow and chemical transport resulting from snowmelt have been studied for an understanding of contributions to watersheds or catchments. A Mobile-Immobile water Model (MIM) was developed to describe the movement of ionic tracers through a snowpack by Lee et al. (2008a) and Lee et al. (2008b). To validate the model used in the studies, mass balance calculations of the model were conducted and comparisons were made between model results and analytical solutions in this work. Mass balance was calculated based on the fact that change in total mass within a snowpack with time is equal to sum of any change in the flux of water or ionic tracers into and out of the snowpack. Calculations of both water and ionic mass show almost perfect agreement between changes of two water and solute mass fluxes. Comparisons between model results and analytical solutions including wave velocity and effective saturation show almost perfect agreement.

홀로그래픽 고분자 분산 액정을 이용한 홀로그램 이중 초점 렌즈 제작

이정훈,성기영,이상조,김기현,조영걸,곽종훈,송재봉,이윤우,Lee, Jung-Hoon,Sung, Gee-Young,Lee, Sang-Jo,Kim, Ki-Hyun,Joh, Young-Gul,Kwak, Chong-Hoon,Song, Jae-Bong,Lee, Yun-Woo 한국광학회 2003 한국광학회지 Vol.14 No.2

다기능성 아크릴레이트 단량체와 네마틱 액정 등을 혼합한 홀로그래픽 고분자 분산 액정 박막을 제작하고 액정의 농도와 피부에서 인가한 교류 전기장 등에 대한 실시간 회절효율을 측정하였다. WPDLC 박막에 기록된 홀로그램은 적절한 교류 전기장의 on/off에 의해 가역적으로 소거와 재생이 가능함을 보였다. 이러한 전기광학 특성을 이용하여 30 cm와 40 cm의 이중초점을 갖는 홀로그램 렌즈를 제작하였다. We Have fabricated a holographic polymer-dispersed liquid crystal (HPDLC) thin film, which is composed of multifunctional acrylate monomer blended with the nematic liquid crystal mixture, and then investigated the real-time diffraction efficiencies for various amounts of liquid crystals and applied AC electric fields. It is experimentally shown that the holographic gratings recorded in the HPDLC film can be reversibly erased and reconstructed by switching on and off an appropriate applied AC electric field. By use of these electro-optic properties we have developed bifocal holographic lenses having two different focal lengths of 30cm and 40 cm.

활동기준원가계산법(Actvitiy-Based Costing)에 의한 모듈러 건축물 공장제작단계 간접비 산정 방안

이정훈,박문서,이현수,이광표,현호상,Lee, JeongHoon,Park, Moonseo,Lee, Hyun-Soo,Lee, Kwang-Pyo,Hyun, Hosang 한국건설관리학회 2015 한국건설관리학회 논문집 Vol.16 No.4

최근 건설 기업들은 노동력 부족, 원자재값 상승, 건설경기 위축 등으로 인해 새로운 건설시장 개척 및 자동화 기술도입을 적극적으로 추진하고 있다. 이러한 노력의 일환으로 최근 제조업의 생산프로세스와 건설생산프로세스가 결합된 모듈러 건축공법이 부각되고 있으며 이와 관련된 연구가 활발히 진행되고 있다. 모듈러 건축프로세스에서 공장제작의 가장 큰 장점 중 하나는 기존 건축프로세스에서 사용하기 어려웠던 제조업의 생산설비시스템을 활용한 생산원가(공사원감)절감이 가능하다는 것 있다. 이를 뒷받침하기 위해서는 대다수의 건축공종이 집중되어있는 공장제작단계에서의 원가산정이 정확해야 하며 특히 직접적인 계산이 어려운 간접비에 대한 구체적인 산정방인 필요하다. 그러나 국내 모듈러 건축산업이 시장도입단계로 이와 관련된 연구가 한정적으로 이루어지고 있어 모듈러 건축물의 원가왜곡현상이 나타날 수 있는 문제가 있다. 따라서 본 연구는 모듈러 건축물의 공장제작단계에서 국내계약법상에서 명시된 제조업과 건설업에서의 간접비 정의를 고찰하고 활동기준원가계산법을 통해 모듈러 건축물을 구성하는 모듈러 유닛별 간접비 산정방식을 제시하였다. 본 연구는 공장제작단계에서의 전 과정 뿐만 아니라 모듈러 건축물의 설계, 제작, 운송, 시공의 간접비 배분에 대한 기초자료로서 활용될 수 있으며 향후 모듈러 건축물의 공장제작단계에서의 원가산정 정확도 향상 및 모듈러 건축물의 전 생애주기에 따른 원가산정방안 마련에 기여할 것으로 기대된다. Modular construction is combined with manufacturing production process and conventional construction industry technique. Considering characteristic of modular construction production process, manufacturing facilities require indirect costs for utilities, equipment, and overall maintenance, which can affect modular units pricing. However, current modular construction cost classification is inadvertent to reflect the manufacturing overhead costs, because it is generally added as a percentage to sum of labor, material and equipment as it called in single cost pool used. This process is easy to estimate the total construction cost at the project starting points, but it brings on misunderstanding of project profit estimations by "cross subsidization phenomenon". To prevent this situation, in this research aims to provide modular construction overhead cost handling process at the detailed indirect cost calculation for manufacturing stage using Activity-Based Costing as one of the powerful method for overhead costs estimation and allocation. Using this research results, modular construction cost estimators have more detailed cost information of modular units and prevent to misallocate indirect costs. Also, it can be utilized to aid the understanding of the company's profit structure.

추정된 일회심박출량을 이용한 수면 무호흡 검출

이정훈,이전,이효기,이경중,Lee, Junghun,Lee, Jeon,Lee, Hyo-Ki,Lee, Kyoung-Joung 대한의용생체공학회 2013 의공학회지 Vol.34 No.2

This paper proposes a new algorithm for sleep apnea detection based on stroke volume. It is very important to detect sleep apnea since it is a common and serious sleep-disordered breathing (SDB). In the previous studies, methods for sleep apnea detection using heart rate variability, airflow and blood oxygen saturation, tracheal sound have been proposed, but a method using stroke volume has not been studied. The proposed algorithm consists of detection of characteristic points in continuous blood pressure signal, estimation of stroke volume and detection of sleep apnea. To evaluate the performance of algorithm, the MIT-BIH Polysomnographic Database provided by Phsio- Net was used. As a result, the sensitivity of 85.99%, the specificity of 72.69%, and the accuracy of 84.34%, on the average were obtained. The proposed method showed comparable or higher performance compared with previous methods.

항공기 피치 조종력 비행시험

이정훈,Lee, Jung-hoon 항공우주시스템공학회 2014 항공우주시스템공학회지 Vol.8 No.3

This paper presents the procedures and the results of the pitch control force via flight test for a light airplane in order to make out the stability of the aircraft and the compliance with concerned regulation. The flight test procedures were determined in order to obtain the aircraft type certification. The instrumentation equipments including airspeed indicator, accelerometer, and pitch control force measurement tools are used to perform the flight test. For the flight test, the airspeed and the pitch control force with related normal acceleration are measured sustaining turn flight with bank angle derived from trim speed. The flight test results showed that the handling qualities of the airplane are complied with the KAS-23, the regulation of the Korean government for the light airplane type certification.

Mo첨가 열연강판의 반복 열처리 제어압연에 관한 연구

이정훈,홍승찬,이경섭,Lee, Jeong-Hun,Hong, Seung-Chan,Lee, Gyeong-Seop 한국재료학회 1999 한국재료학회지 Vol.9 No.7

결정립 미세화는 강도와 인성을 동시에 향상시킬 수 있는 유일한 방법이다. 제어압연과 가속냉각은 공정 중에 재결정과 결정립 조대화 거동을 조절함으로써 기계적 성질을 향상시키는 효과적인 방법으로 알려져 있으며, 반복열처리에 의한 반복상변태는 결정립 미세화 방법 중의 하나이다. 본 연구에서는 제어압연과 반복열처리를 복합 적용하여 그 효과를 관찰하였다. Mo 첨가효과와 공정변수의 효과를 관찰하기 위해 Mo이 첨가된 저탄소강 시편을 준비하여 Gleeble로 가공열처리 모의실험을 하였다. Mo첨가는 결정립 조대화 온도를 상승시키고, 오스테나이트 재결정을 억제하는 효과를 나타내었다. 오스테나이트 결정립 미세화에 가장 효과적인 공정조건은 반복 열처리 제어압연을 두번 실시하는 것이고, 첫번째보다 두번째 압연율을 더 크게 하는 것이었다 Grain refinement is the only strengthening mechanism that improves both strength and toughness. Controlled rolling and accelerated cooling techniques have been known to be effective method to improve the mechanical properties by controlling the recrystallization and/or grain coarsening during processing. Repeat phase transformation $(\gamma/\alpha)$ by repeat heat treating is another way of grain refinement. In this study, a combined effect of controlled rolling and repeat heat treating was investigated. To study the effects of Mo addition and process parameters, Mo alloyed low carbon steels were prepared and thermomechanical controlled processes were simulated in the Gleeble system. The Mo addition resulted in an increasement of the grain coarsening temperature and suppress austenite recrystallization. The optimum condition for the refinement of austenite was obtained when the controlled rolling was performed twice with the same heat treatment condition, and reduction ratio of second pass was higher than that of first pass.

망막생검으로 확진된 원발성 안구내 림프종 1예

이정훈,김윤영,Jung Hoon Lee,MD,Yun Young Kim,MD,PhD 대한안과학회 2010 대한안과학회지 Vol.51 No.2

Purpose: To report one case of primary intraocular lymphoma confirmed by endoretinal biopsy and clinical experience. Case summary: A 65 year-old man complaining of persistent decreased visual acuity was referred to our hospital. Biomicroscopic examination showed bilateral vitreous cells and small round yellowish inflammatory lesions at the level of the retinal pigment epithelial cells. The disc of the left eye was pale in color. Fluorescein angiographic examination of the left eye showed intermingling round hyperfluorescent and hypofluorescent lesions. We performed diagnostic vitrectomy due to unresponsiveness to oral steroid therapy, but the result was negative. We finally performed an endoretinal biopsy, which showed tumor cells with H&E staining and strong immunoreactivities against CD 20 and CD 79a indicating the presence of B cells. We diagnosed this case as primary intraocular lymphoma and performed multiple- cycle chemotherapy with high-dose methotrexate. The ocular signs and symptoms were improved after chemotherapy. Conclusions: Endoretinal biopsy could be another diagnostic tool for confirming suspected primary intraocular lymphoma in cases showing negative results with diagnostic pars plana vitrectomy and cytology. J Korean Ophthalmol Soc 2010;51(2):297-302

대륙밭쥐(Clethrionomys rufocanus) 정자의 미세구조 관찰

이정훈,Lee, Jung-Hun 한국현미경학회 2009 Applied microscopy Vol.39 No.2

Cricetinae 아과 Clethrionomys 아속에 속하는 한국산 대륙밭쥐(Clethrionomys rufocanus)의 정자의 형태적 특징을 알아보기 위하여 주사 및 투과형전자현미경으로 관찰하였다. C. rufocanus정자머리의 모양은 날카롭게 굽은 하나의 dorsal hook를 가지며, 전체적인 머리모양은 마치 도끼모양의 형태를 취하고 있었다. C. rufocanus정자의 전체길이는 95.8 ${\mu}m$이었으며, 정자머리의 길이는 7.8 ${\mu}m$, 꼬리는 88.0 ${\mu}m$이었다. 꼬리는 경부 (1.0 ${\mu}m$), 중편부(22.0 ${\mu}m$), 주편부와 미부 (65.0 ${\mu}m$)로 각각 구성되어져 있었다. 분절주 (segmented columns)는 약 10~12개의 마디로 이루어져 있었으며, 미토콘드리아의 수는 약 170~178개 정도이었다. 첨체 후 덮개는 핵의 1/2을 점유하고 있었으며, 적도절은 핵 표면의 첨체 후 덮개(post-nuclear cap)와 첨체덮개(acrosomal cap) 사이에 위치하고 있었다. 1, 5, 6번의 외측섬유들은 다른 것보다 더 크며, 섬유초 (fibrous sheath)와 종 지주(longitudinal column)은 주편부에서 관찰되어졌으며, 미부에서는 섬유초가 존재하지 않았다. 이상의 결과로 미루어 보아, 정자두부와 꼬리의 형태적인 구조는 정자의 진화 패턴과 종을 분류하는데 유용한 정보를 제공하리라 여겨진다. To investigate the morphological characteristics of spermatozoa of the grey red-blacked vole (Clethrionomys rufocanus) belongings to the subfamily Cricetinae, subgenus Clethrionomys were examined by scanning and transmission electron microscopes. The sperm head of C. rufocanus was an ax or hatchet in shape with a curved single dorsal hook. The total length of C. regulus sperm was 95.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (88.0 ${\mu}m$) consisted of four major segments: the neck (1.0 ${\mu}m$), middle piece (22.0 ${\mu}m$), and principal piece plus end piece (65.0 ${\mu}m$), respectively. The segmented columns were about 10~12 in number. The number of gyres of mitochondria ranged from about 170 to 178. The post-nuclear cap occupied about a half of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nos. 1, 5 and 6 of the outer dense fibers were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath was not seen at the end piece. In conclusion, the morphological structures of sperm head and tail may be useful information to patterning of sperm evolution and classifying of species.

창간특집 - 언제나처럼 낙농육우농가의 든든한 대변자로 곁에 있겠습니다!

이정훈,Lee, Jeong-Hun 한국낙농육우협회 2012 낙농·육우 Vol.32 No.6

중환자실 간호사의 이직의도 예측요인

이정훈Lee, Jung Hoon),송영숙(Song, Yeoungsuk) 병원간호사회 2018 임상간호연구 Vol.24 No.3

Purpose: The purpose of this study was to understand morality identity, occupational stress and authentic leadership and identify factors contributing to turnover intention among intensive care unit (ICU) nurses. Methods: Data were collected from 230 nurses at the university hospitals in Daegu, Ulsan and Busan between February 15 and March 23, 2017. Instruments measuring turnover intention, moral identity, occupational stress, and authentic leadership were utilized. Statistical analysis included t-test, ANOVA, Pearson correlational analysis, and hierarchical regression analysis. Results: A total of 207 nurses in ICU participated in this study. The power of explanation with age and dependents on turnover intention was 4.1%. With inclusion of occupational stress, moral identity, and authentic leadership factors put into the model, further 20.4% was explained. The explanatory power of the turnover intention in the final model was 23.6% (F=11.63 p<.001), and occupational stress was the key factor explaining turnover intention (β=.28, p<.001). Predictive factors contributing to turnover intention were age, occupational stress, moral identity, and authentic leadership in final model. Conclusion: These findings demonstrated occupational stress, moral identity and authentic leadership as critical factors contributing turnover intention of ICU nurses. It is necessary to promote nursing manager’s authentic leadership, and to encourage moral identity in ICU nurses. In addition, providing intervention programs to reduce occupational stress for ICU nurses is necessary.