http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A시 하수처리시설 약품주입비율에 따른 하수슬러지 점성도 및 건조특성에 관한 연구
윤권감 ( Kwon-gam Yun ),이승원 ( Seung-won Lee ) 한국환경기술학회 2017 한국환경기술학회지 Vol.18 No.1
본 연구는 A시 11개 하수처리장의 동절기 및 비동절기 약품 사용 비율에 대한 현황을 비교를 하였으며, 또한 그에 따른 점성도 평가 및 하수슬러지 건조 특성에 관한 연구를 실시하였다. 2012년의 비동절기 하수슬러지 1kg 발생 대비 응집제 사용비율은 소화슬러지 및 농축슬러지가 0.54% 및 0.31%로 나타났으며 동절기의 경우 소화슬러지 및 농축슬러지가 0.66% 및 0.27%로 농축슬러지에 비해 약 3배의 높았다. 2013년의 경우 역시 비동절기의 소화슬러지 사용비율 평균이 0.66% 및 농축슬러지의 사용 비율 평균이 0.30%에서 소화슬러지 동절기 사용비율은 0.76%, 농축슬러지 사용비율 0.27%로 소화슬러지의 경우 동절기 응집제 사용비율 평균이 높은 반면 농축슬러지는 동절기 응집제 사용량 평균이 오히려 감소하는 결과를 나타내었다. 점성도는 소화슬러지인 A 및 C site의 점성도가 농축슬러지인 E 및 H site 보다 다소 낮게 조사되었으며, 계절에 따라서 모든 site에서 겨울철의 점성도가 높게 조사되어 이는 응집제 사용의 증가에 기인하는 것으로 판단된다. 하수슬러지 건조효율 평가의 경우 1차 부분건조에서 내부온도 100℃∼120℃ 및 체류시간 90분 이후 모든 슬러지가 함수율 65% 이하를 만족하였으며, 특히 함수율이 다소 높게 나타났던 C site가 1차 부분건조 53.1%까지 수분이 감소되었다. 이후 2차 직접건조 90분 후 모든 site가 완전건조 함수율 10%를 만족 하였으며, 특히 초기 함수율이 다소 높았던 A site 및 C site의 최종 함수율이 각각 3.2% 및 5.1%까지 낮게 나타나 건조효율이 높은 것으로 나타났다. This is a research on evaluation of viscosity and drying characteristics of sewage sludge according to polymer dose ratio. The results are as follows. The polymer dose ratios per 1kg of sewage sludge produced during non-winter seasons in 2012 were 0.54% for digested sludge and 0.31% for thickened sludge. During winter, the polymer dose ratio was 3 time higher with 0.66% for digested sludge and 0.27% for thickened sludge. Similarly in 2013, non-winter polymer dose ratios had average of 0.66% for digested sludge and 0.30% for thickened sludge. In winter season, the ratios were 0.76% for digested sludge and 0.27% for thickened sludge. While the polymer dose ratio average was higher in winter season for digested sludge, the average rather decreased in winter season for thickened sludge. Viscosity of digested sludge from sites A and C was lower than that of thickened sludge from sites E and H. Increase in the polymer usage seems to contribute to the higher viscosity from all sites during winter. Evaluation on sewage sludge drying efficiency showed that all sludge met moisture content below 65% after indirect drying with inner temperature of 100℃∼120℃ and retention time of 90 minutes. Especially moisture content of sludge from site C, with comparatively high initial moisture content, decreased down to 53.1% after indirect drying. After 90 minutes of direct drying, all sites met complete drying moisture content of 10%. Especially, sites A and C that showed high initial moisture content had final moisture content of 3.2% and 5.1%, displaying high drying efficiency.
해양 미세플라스틱 저감 방안 연구 - 환경 거버넌스를 중심으로 -
남명숙,윤권감,이승원 한국환경기술학회 2022 한국환경기술학회지 Vol.23 No.2
This study focused on environmental governance to reduce marine micro plastics. In the last 5 years, marine debris was generated in the order of coast > sedimentation > floating debris. In addition, 70,840 tons of marine debris was collected in 2016, but it is increasing to 138,362 tons in 2020. Currently, marine debris monitoring research is being conducted mainly on the coast of Korea, but since microplastics can affect marine life and items produced on the coast, we suggest diversifying monitoring. And the measures to reduce styrofoam buoy waste are as follows. Introduce a systematic and sustainable education system that can make fishery workers aware of the problem of waste dumped into the sea and the seriousness of marine pollution.
유동상식 소각로에서 발생되는 폐유동사 처리 및 재활용 방안
박재우,박민욱,윤권감,이승원,이상석,김정권 한국폐기물자원순환학회 2018 한국폐기물자원순환학회 학술대회 Vol.2018 No.05
우리나라에서 폐기물을 처리하는 방법에는 크게 매립, 소각, 재활용이 있으며 일반적으로 폐기물을 수거하여 재활용 할 수 있는 부분을 제외한 나머지는 소각한 뒤 매립을 하는 방식을 택하고 있다. 매립은 계속적인 매립지 확보에 어려움을 겪고 있으며 폐기물의 배출량이 갈수록 증가됨에 따라 예상되는 매립지의 기대수명이 점점 감축되고 있다. 이러한 상황에서 우리나라에서는 폐기물을 짧은 시간 안에 매우 안정적으로 처리할 수 있는 소각기술로 시야를 넓혀야 한다. 소각은 대부분 재활용할 수 있는 폐열 및 고형화연료를 확보할 수 있을뿐더러 매립지의 수명도 효과적으로 늘릴 수 있다. 또한 소각이 완료된 후의 소각재는 수분까지도 거의 제거된 상태이기 때문에 바로 매립이 가능한 정도에 이르렀다. 환경부에서 발행한 ‘전국 폐기물 발생 및 처리 현황(2015년도 수정본)에 따르면 소각과정에서 발생된 연소재의 일일배출량은 점점 증가하는 추세이다. 따라서, 소각재를 매립하는 방법 외에 재활용할 수 있는 방안을 모색하여 매립지의 수명연장은 물론 효율적인 재활용자원으로 사용할 수 있게 만드는 것이 필요하다. 그러나 소각재는 현행 폐기물 관리법상 중금속 농도가 비교적 낮기 때문에 일반폐기물로 관리되고 있었으나 유해성 논란이 끊이질 않고 있다. 따라서, 소각재에 들어있는 유해중금속의 농도를 효과적으로 처리하여 낮추면 다른 분야에서 즉각 활용할 수 있는 좋은 재료로 사용할 수 있을 것이다. 본 연구에서는 소각재의 처리 실태를 알아보고 재활용되고 있는 방법들을 검토, 비교하고 현재 유동상식 소각로에서 배출되는 폐유동사의 재생골재로의 재활용 가능성에 대해 알아보았다. 추가적으로 유동상식 소각로에서 배출되는 보일러재와의 배합 가능성, 그리고 성분분석을 이용한 함유성분의 함량과 재활용 목표의 관계도 연구하였다. 이는 기존에 활용되고 있는 재활용 방법과 새롭게 이용할 수 있는 방법에서 원재료로 사용되고 있는 것들을 대체할 수 있는가에 대한 것이다. 기존에 사용되고 있는 원재료만큼의 효율이 나온다면 원가절감은 물론 폐기물 재활용, 나아가서는 자원재이용에 따른 환경문제 감소에 도움이 될 수 있을 것이라 판단된다.
정병길,이승원,윤권감,정진희,김정웅,최영익 한국환경과학회 2020 한국환경과학회지 Vol.29 No.11
In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na3PO4, CrO4, 2Na2CrO4 and 2NaNO3 will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.
도금폐수처리공정 중 BPC 단위공정 내 NaOCl 반응시간에 따른 도금폐수의 COD, Ni 및 P 제거특성
정병길,이승원,윤권감,최영익 한국환경과학회 2021 한국환경과학회지 Vol.30 No.1
The purposes of this study were to evaluate the removal characteristics of COD, Ni, and P and to derive appropriate operating conditions for the plating wastewater according to NaOCl reaction time and pH operating conditions in the BPC unit process during the plating wastewater treatment process. As a results of evaluating the removal characteristics for raw wastewater by each BPC unit process, the removal efficiencies of COD, Ni and P in BPC 1-1 unit process were 72.8%, 99.1%, and 100.0%. Therefore, the proper reaction time of NaOCl was derived as 21.1 minutes. In order to maintain the +800 mV ORP and the reaction time of 20 minutes, the temporary injection and continuous injection of NaOCl in the BPC unit process were 13.7 mL and 18.7 mL, respectively. It was found that the temporary injection method of NaOCl reduced the chemical cost by 36.5% compared to the continuous injection method. Also, Ni showed the highest removal efficiency of 97.8% at pH 10.5. On the other hand, P showed a removal efficiency of 57.4% at pH 10.0.