http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐 전이 암에 대한 Lipid Coated Polymeric Nanoparticles에 관한 연구
박준영,박상효,조예림,정민지,김인우,강원준,기재홍,Park, Junyoung,Park, Sanghyo,Jo, Yerim,Jeong, Minji,Kim, Inwoo,Kang, Wonjun,Key, Jaehong 대한의용생체공학회 2018 의공학회지 Vol.39 No.4
Lung cancer and pulmonary metastasis are the leading cause of cancer mortality worldwide. Survival for patients with lung metastases is about 5%. Nanoparticles have been developed for the imaging and treatment of various cancers, including pulmonary malignancies. In this work, we report lipid coated polymeric nanoparticles (LPNs) with an average diameter of 154 nm. In vivo performance of LPNs was characterized using optical imaging system. We expect this nanoparticle can be used for finding lung cancer or lung metastasis. Eventually loading therapeutic drug with the nanoparticle will be utilized for cancer diagnosis and effective therapy at the same time.
인공경량골재의 탄산화 반응에 따른 물성향상에 관한 연구
박준영,김유택,최윤재,Park, Junyoung,Kim, Yootaek,Choi, Yunjae 한국결정성장학회 2012 韓國結晶成長學會誌 Vol.22 No.5
The mechanical property enhancement was studied using fly ash produced from fluidized bed type boiler in power plant, which contains a lot of Ca component being used to carbonate for $CO_2$ fixation in the lightweight aggregates made of cement and some portion of fly ash as a cement substitution under the supercritical condition. Specimens having various fly ash substitution rates and curing periods were carbonated under the supercritical condition at $40^{\circ}C$. The weight change rate, carbonation rate by TG/DTA analysis, 1% Phenolphthalein test, specific gravity and mechanical compression strength test were performed to observe the mechanical property enhancement of the cemented materials after carbonation under the supercritical condition and to make sure those could be classified as lightweight aggregates having specific gravity under 2.0. 순환유동층 연소방식의 화력발전소에서 석탄을 연소시킨 후 발생하는 석탄재 중 탄산화 반응 인자인 Ca 성분을 다량 포함한 비산회를 시멘트에 일정량 치환하여 제조한 인공경량 경화체를 초임계상태에서 이산화탄소($CO_2$)를 고정화하여 골재의 기계적 물성향상을 도모하였다. 초임계 분위기 $40^{\circ}C$ 조건에서 비산회의 치환량을 변화시켜 재령일수별 탄산화를 시행하였다. 비산회 치환량에 따른 탄산화 반응시킨 인공경량골재 경화체의 무게변화율, TG/DTA 분석, 1 % 페놀프탈레인 알칼리성 측정을 통하여 탄산화 진행여부를 확인하였으며 28일까지의 재령 이후 경화체의 압축강도 측정과 비중측정을 통하여 골재의 기계적 물성향상과 인공경량골재의 기준 비중치인 2.0 이하의 비중값을 갖는 탄소고정 인공경량골재 경화체를 얻는 것이 가능할 것으로 판단되었다.
가변안내깃 설치각이 다단 축류압축기 성능에 미치는 영향
박준영(JunYoung Park),서정민(JeongMin Seo),임형수(HyungSoo Lim),최범석(Bumseok Choi),최태우(Taewoo Choi),최재호(Jaeho Choi) 한국추진공학회 2016 한국추진공학회지 Vol.21 No.1
일반적으로 다단 축류압축기는 부분 부하 조건에서 충분한 운전영역을 확보하기 위해 가변안내깃을 이용한다. 본 연구에서의 해석대상인 다단 축류압축기는 입구에서의 안내깃과 함께 1단과 2단 정익을 가변안내깃으로 하여 운전영역을 확보한다. 따라서 본 연구에서는 정격회전수의 70%와 90% 회전수 조건에서의 가변안내깃의 설치각이 다단 축류압축기의 성능에 미치는 영향에 대해 조사하였다. 다단 축류압축기의 성능은 3차원 정상상태 및 비정상상태 수치해석을 이용하여 확보하였다. 각 해석기법을 통해 확보한 결과를 비교하였으며 내부유동장의 특성을 파악하였다. Generally the variable guide vane is used to secure the sufficient operating point in the off-design condition. In this study the inlet guide vane, 1st and 2nd stators in a multi-stage axial compressor are movable to obtain the operating range. So the effects of variable guide vane setting angle on the performance of 2.5 stage axial compressor were investigated at 70 % and 90 % conditions of nominal rotating speed in this paper. The steady-state and unsteady numerical analyses were conducted at each operating condition. The performance map, lost efficiency and flow fields were compared.
래치형 패스 트랜지스터 단열 논리에 기반을 둔 에너지 절약 회로의 설계
박준영(Junyoung Park),홍성제(S.J. Hong),김종(J. Kim) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.2Ⅰ
최근 VLSI 설계 분야에서, 단열 논리는 에너지 효율성이 뛰어난 저전력 설계 기술 중 하나로 각광 받고 있다. 이러한 단열 논리는 기존의 저전력 회로 설계를 위해 사용되었던 CMOS 논리들을 서서히 대체해 나갈 것으로 기대되고 있다. 하지만, 많은 단열 논리들의 제시에도 불구하고, 기존의 CMOS 논리들을 단열 논리로 대체하는 기법에 관한 연구는 거의 없는 실정이다. 이 논문에서는 래치형 패스 트랜지스터 단열 논리 (LPAL) 와 이를 이용한 저전력 설계 기업을 소개하였다. 래치형 패스 트랜지스터 단열 논리는 기존의 단열 논리들이 가지고 있는 단점을 해결하고, 보다 저전력 지향적으로 CMOS 논리를 대체 할 수 있다는 장점을 가진다.
병렬해석기법을 이용한 1 단 터빈 정익/동익 상호작용하에서의 3 차원 비정상 유동해석
박준영(JunYoung Park),백제현(JeHyun Baek) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.5
In this paper, the development and validation of a three-dimensional, parallel, unsteady Navier-Stokes<br/> code for predicting the unsteady effects due to stator/rotor interaction in one-stage turbomachinery are<br/> conducted. The solver is parallelized using domain decomposition and Message Passing Interface(MPI)<br/> standard to overcome the limitation of memory and save the CPU time in three-dimensional unsteady<br/> calculation. A sliding mesh interface approach has been implemented to exchange flow information between<br/> blade rows. The numerical results are compared to validate the accuracy of code with experimental data<br/> wherever possible in UTRC LSRR one-stage turbine. The comparison shows a good agreements.
A New Approach of Multi-Scale Simulation for Investigating Nano-Scale Material Deformation Behavior
Junyoung Park(박준영) 한국기계가공학회 2009 한국기계가공학회지 Vol.8 No.1
Recently, an approach for nano-scale material deformation has been developed that couples the atomistic and continuum approaches using Finite Element Method (FEM) and Molecular Dynamics (MD). However, this approach still has problems to connect two approaches because of the difference of basic assumptions, continuum and atomistic modeling. To solve this problem, an alternative way is developed that connects the QuasiMolecular Dynamics (QMD) and molecular dynamics. In this paper, we suggest the way to make and validate the MD-QMD coupled model.