http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하이볼륨 플라이애시 콘크리트의 철근부식 및 염소이온 확산 특성
권순오,배수호,이현진,정상화,Kwon, Soon-Oh,Bae, Su-Ho,Lee, Hyun-Jin,Jung, Sang-Hwa 한국건설순환자원학회 2014 한국건설순환자원학회 논문집 Vol.2 No.1
이 연구의 목적은 하이볼륨 플라이애시(HVFA) 콘크리트의 강도수준 및 플라이애시의 혼입률별로 콘크리트 내의 철근부식 및 염소이온 침투 저항성을 평가하는 것이다. 이를 위하여 물-결합재비 및 플라이애시 혼입률에 따라 철근 상부를 노출시킨 원주형 공시체와 통상적인 원주형 공시체를 제작하였으며, 이들 각각에 대해 압축강도 및 염소이온 침투 저항성 시험과 전기화학적 방법에 의한 철근부식 촉진시험을 수행하였다. 실험 결과, 대체적으로 플라이애시 혼입률이 많을수록 HVFA 콘크리트의 압축강도는 감소하였으나, 철근부식 및 염소이온 침투 저항성은 크게 개선되는 것으로 나타났다. The purpose of this experimental research is to evaluate the resistance of reinforcement corrosion and chloride ion penetration of high volume fly ash (HVFA) concrete. For this purpose, concrete test specimens were made for various strength level and replacement ratio of fly ash, and then compressive strength and diffusion coefficient for chloride ion of them were measured for 28, 91 and 182 days, respectively. Also, corrosion monitoring by half cell potential method was carried out for the made lollypop concrete test specimens to detect the time of corrosion initiation for reinforcement in concrete. As a result, it was observed from the test results that compressive strength of HVFA concrete was decreased with increasing replacement ratio of fly ash but long-term resistance against reinforcement corrosion and chloride ion penetration of that was increased.
매입형 영구자석 동기전동기의 약계자 제어에 따른 전자기적 특성 연구
권순오,Kwon, Soon-O 대한전자공학회 2013 전자공학회논문지 Vol.50 No.9
This paper deals with electromagnetic characteristics of IPMSM (Interior Permanent Magnet Synchronous motor) caused by field weakening current control. In order to extend operation speed, field weakening current control is generally used in IPMSM operation. During field weakening, distorted linkage fluxes are resulted by saturation of core material. Therefore, distorted input voltage waveform is required for sinusoidal current input. As the current vector angle increases for field weakening, distortion of linkage flux and back-emf becomes significant. This situation is analyzed by 2-dimensional finite element analysis and verified by experiment. With the results, it is concluded that motor parameters, such as linkage flux by permanent magnet, phase resistance, d-q axis inductance, are insufficient for estimating required voltage for given speed especially in field weakening and additional considerations for increased harmonics of voltage are required. 본 논문에서는 IPMSM(Interior Permanent Magnet Synchronous Motor)의 약계자 제어에 따른 전자기적특성을 다룬다. IPMSM의 운전 속도 영역을 확장하기 위해 약계자 전류제어가 일반적으로 사용되며 약계자 운전 중에는 전기강판의 자기적 포화에 의해 쇄교자속의 왜형이 발생하게 된다. 따라서 정현파 전류 입력을 위한 전압 파형은 왜형을 갖게 된다. 약계자 전류 증가에 따라 이러한 전압 왜형은 더욱 크게 발생되며 기본파 전압에 비해 상당한 크기의 고조파 전압을 필요로 하게 된다. 이러한 현상을 2차원 유한요소 해석을 이용하여 확인하였으며 시험을 통해 검증하였다. 본 연구 결과를 통해 IPMSM의 특성 분석에 사용되는 d-q축 등가회로 파라미터 즉, 영구자석에 의한 쇄교자속, d-q축 인덕턴스는 산정 단계에서 기본파 물리량으로 계산되므로 약계자 운전시 발생하는 전압 왜형을 예측할 수 없음을 알 수 있다. 결국 주어진 전압에서 얻을 수 있는 속도 예측에 오차를 수반하게 되며 전압고조파에 대한 대책이 필요하다.
섬유보강 시멘트 복합체의 특성에 미치는 선반 스크랩 규격의 영향
권순오,배수호,이현진,김성욱,박정준 한국복합신소재구조학회 2015 복합신소재구조학회논문집 Vol.6 No.2
It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites(FRCCs) raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manufactures and is occurred when lathe and milling works of them are conducted to process steel manufactures. Thus, the purpose of this research is to investigate the effect of measurements of lathe scrap on the characteristics of FRCCs. For this purpose, various lathe scraps were collected from processing plants of metal, and then these were processed 10mm, 20mm, and 40mm in lengths for 2mm and 4mm in widths, respectively. FRCCs containing lathe scraps were made according to their widths and lengths, and then characteristics such as the workability, compressive strength, and flexural strength of those were evaluated. As a result, it was observed from the test results that the optimum measurements of the lathe scrap for manufacturing FRCCs was 2mm in width and 40mm in length.
선반 스크랩 보강 시멘트 복합체의 직접인장강도 및 휨성능
권순오,배수호,김진우,이현진,김성욱 한국콘크리트학회 2017 콘크리트학회논문집 Vol.29 No.6
철강제품의 부산물인 선반 스크랩은 경제적이고, 강섬유의 성분과 매우 유사하므로, 섬유 보강 콘크리트를 제조할때, 강섬유의 대체재료로 활용하는 것이 요구되고 있다. 따라서, 이 실험연구의 목적은 선반 스크랩의 활용 방안을 제시하기 위하여 선반 스크랩 보강 시멘트 복합체(lathe scrap reinforced cementitious composites, LSRCCs)의 직접인장강도 및 휨성능을 평가하는 것이다. 이를 위하여 금속 가공공장에서 선반 스크랩(SCM440)을 수집하여 폭 2 mm, 길이 40 mm로 절단한 후 이를 체적비로1.5 % 혼입한 LSRCCs를 제작하였다. 제작된 LSRCCs의 직접인장강도뿐만 아니라 하중-처짐 곡선, 휨강도 및 휨인성 등의 휨성능을 평가하였다. 결국, LSRCCs의 직접인장강도 및 휨강도는 플레인 모르타르보다 다소 증가하고, LSRCCs는 플레인 모르타르에서 나타나지 않았던 휨인성을 발휘하는 것으로 나타났다.
저출력레이저 조사가 백서의 좌골신경 재생에 미치는 영향에 관한 연구
권순오,한경수,엄인웅,김병욱 원광대학교 치의학연구소 1992 圓光齒醫學 Vol.2 No.1
This study was performed to investigate the effects of low-power laser (Gallium-Arsenide diode and Helium-Neon gas) application on the regeneration of experimentally cut sciatic nerve in rats. The right sciatic nerve was cut and immediately sutured by combined suture through epineurium and perineurium under microscopic field. Suture material used were 8-0 coated Vicryl (polyglactin 910) to nerve and 6-0 Mersilk to muscle and skin. The subjects were classified into control or experimental group by without or with application of laser and experimental group was subdivided by amount of application time. The subjects were sacrified for tissue specimen at the period of postoperative 1, 2. 4 and 6 weeks, respectively, and the specimens were stained with Hematoxilin and Eosin for general findings and with Toluidine blue for nerve cells and mast cell. The obtained results were as follows 1. In control group the regeneration were slowly and slightly progressed when compared with experimental groups. As a result, mild nerve degeneration and surrounding tissue inflammation were still observed at postoperative 6-week in control group but in experimental groups, early regenerative changes in Schwann cell and mild fibrosis in perineural granulation tissue were shown at postoperative 4-week. 2. In postoperative findings, degeneration of axon were more severe than that of Schwann cell in both groups. But in experimental groups, degeneration of endoneurium and perineurium were rapidly decreased and mast cells were much more observed. 3. Laser irradiation on sciatic nerve regeneration was efficient, but the difference by the amount of irradiation time in two experimental groups was not distinct.
권순오,김선규,이낙운 강원대학교 산업기술연구소 2005 産業技術硏究 Vol.25 No.B
The planning phase of construction project success or failure of the enterprise decision the 1st dangerous duration which occurs very there is a possibility of making with the phase which is important, of construction project in life cycle most many risk. But the risk management from planning phase well does not become accomplished is the actual condition from existing construction project. Consequently, it classifies the risk event from project initial planning phase of construction project from this study which probably is substantial risk event the possibility of accomplishing from a planning phase successfully in order to be.