가압가열 및 Microwave 처리가 생면의 품질에 미치는 영향

박시우,김꽃봉우리,김민지,강보경,박원민,김보람,박홍민,최정수,최호덕,안동현,Bark, Si-Woo,Kim, Koth-Bong-Woo-Ri,Kim, Min-Ji,Kang, Bo-Kyeong,Pak, Won-Min,Kim, Bo-Ram,Park, Hong-Min,Choi, Jung-Su,Choi, Ho-Duk,Ahn, Dong-Hyun 한국식품영양학회 2013 韓國食品營養學會誌 Vol.26 No.4

중력분을 이용하여 제면한 후 가압가열, microwave 및 가압가열과 microwave 병행 처리한 후, 생면 및 삶은 면의 품질에 미치는 영향에 대하여 알아보았다. 생면의 pH는 microwave 1 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았으며, 수분 함량은 autoclave 50 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았고, 그 외의 처리구에서는 모두 수분 함량이 감소함을 확인하였다. 면의 색도 측정 결과는 명도는 무처리구에 비해 모든 처리구에서 감소하였으며, 적색도는 microwave 1 min 처리구는 감소한 반면, 나머지 처리구는 증가하였다. 황색도는 autoclave 50 min 처리구와 autoclave 50 min/microwave 1 min 병행 처리구에서 증가한 반면, 나머지 물리적 처리구에서는 감소하였다. 삶은 면의 색도에서는 명도, 적색도, 황색도 모두에서 무처리구에 비하여 물리적 처리구에서 증가한 값을 나타내었다. 물성 측정 결과는 경도, 부착성, 응집성, 검성, 복원성에서 무처리구와 비교시 microwave 1 min 처리구는 유의적으로 감소하였으며, 그 외 처리구에서는 유의적으로 증가한 값을 나타내었다. 탄력성과 전단력은 모든 처리구에서 유의적으로 증가하였으며, 인장력은 가압가열 30 min 처리구와 무처리구가 유의적인 차이를 보이지 않았으나, 나머지 물리적 처리구에서는 유의적으로 증가하였다. 관능 평가 결과는 생면의 경우 색 항목에서 물리적 처리구들이 유의적으로 낮은 점수를 받았다. 맛, 질감, 향 항목에서는 무처리구와 물리적 처리구간 유의적 차이를 보이지 않았다. 전체적인 기호도에서는 microwave 1 min 처리구가 가장 높은 점수를 얻었으며, 가압가열(50 min)과 microwave(1 min) 병행 처리구는 무처리구와 비슷한 점수를 얻었다. 따라서 제면 후 가압가열 및 microwave 처리가 생면 및 삶은 면에 있어서 색과 질감 항목을 보완, 개선시킨다면 알러겐성이 저감화된 면을 제품화하는데 적합할 것으로 사료되어진다. This study was conducted to determine the effects of physical treatments for quality of wet noodles. Noodles were being tried with a microwave (for 1 min), an autoclave (for 30 or 50 min), and both autoclave and microwave (for 30/1 min or 50/1 min). The results showed that the pH levels were slightly decreased after treatments of autoclave and autoclave/microwave. The moisture contents were considerably decreased as compared to the control except autoclave (50 min). After all treatments, the lightness was decreased in all samples, but, redness was increased (except microwave) and the yellowness was increased after autoclave (50 min) and autoclave/microwave (50/1 min). Texture was increased as compared to the control except microwave. In the sensory evaluation, the noodles treated with microwave, autoclave (50 min), and autoclave/ microwave (50/1 min) showed a high score in overall preference. From these results, both the autoclave and microwave methods can be applied to the wet noodles without diminishing its quality to a great extent.

반죽에 가압가열 및 Microwave 처리가 빵의 품질에 미치는 영향

김꽃봉우리(Koth-Bong-Woo-Ri Kim),최정수(Jung-Su Choi),김동현(Dong-Hyun Kim),선우찬(Chan Sunwoo),정슬아(Seul-A Jung),김현지(Hyun-Jee Kim),정다현(Da-Hyun Jeong),정희예(Hee-Ye Jeong),최호덕(Ho-Duk Choi),안동현(Dong-Hyun Ahn) 한국식품영양과학회 2012 한국식품영양과학회지 Vol.41 No.5

모닝빵 반죽을 2차 발효 후에 microwave, 가압가열 및 microwave/가압가열 병행 처리를 하여 오븐에 굽기 전후 모닝빵의 품질에 미치는 영향을 알아보았다. 모닝빵의 pH는 가압가열 처리한 빵이 무처리구에 비해 약간 감소하는 경향을 보였으며, 수분함량은 microwave 처리한 반죽을 오븐에 구운 빵(25~28%)이 무처리구(33%)와 비교 시 가장 많이 감소하였다. 빵의 색도 측정 결과, 겉의 명도, 적색도 및 황색도는 오븐에 굽지 않은 microwave 1분 처리구를 제외하고는 무처리구와 큰 차이를 보이지 않았다. 빵 내부는 가압가열 처리한 빵에서 명도는 감소하였으며, 적색도 및 황색도는 증가하였다. 물성 측정 결과, 가압가열 처리한 빵에서 경도, 검성, 씸힘성 및 전단력이 무처리구에 비해 크게 증가하였다. 관능평가에서는 microwave 1분 처리 후 오븐에 구운 빵이 색, 향, 맛, 전체적인 기호도에서 무처리구와 유사한 평가를 받았으나, 가압가열/microwave 병행 처리 후 구운 빵이 색, 향, 형태, 질감 및 전체적인 기호도에서 가장 낮은 점수를 받았다. 이상으로 모닝빵 반죽에 물리적 처리 시 빵의 품질 및 관능적 특성을 좋지 않게 영향을 주는 것을 확인하였으며, 특히 이전 연구에서 빵의 알레르겐성을 가장 감소 시킨 가압가열/microwave 병행 처리 후 오븐에 구운 빵이 품질 및 기호도 평가에서 가장 좋지 않은 결과를 보여 가압가열 및 microwave 처리 후에도 빵의 품질을 유지할 수 있도록 연구가 더 진행되어야 할 것이다. This study conducted autoclave and microwave treatments on dough to determine if there were any changes in quality after the dough was cooked into bread. Wheat dough after secondary fermentation was treated with a microwave (1 min), an autoclave (30 min), and both an autoclave and microwave (30 min/1 min). We then measured the pH, moisture content, color, texture, and sensory evaluation. The results showed that pH was slightly decreased when it was treated in an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). When microwaved and baked, the moisture content most decreased compared to the control. In crust color, there were no considerable differences in lightness, redness, or yellowness compared to the control, except when microwaved (no baking). The lightness of the crumb color decreased, while redness and yellowness increased, when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking). Hardness, gumminess, chewiness and shear force were significantly increased when dough was treated with an autoclave (baking and no baking) and autoclave/microwave (baking and no baking) compared to the control. In the sensory evaluation, there were no considerable differences in color, aroma, taste, or overall preference when microwaved and baked. Color, aroma, shape, and overall preference were the worst when the dough was treated with autoclave/microwave (baking and no baking). These results suggest that autoclaving and microwaving may reduce the quality of bread, and countermeasures to this problem are necessary.

가압가열 및 Microwave 처리가 쿠키의 품질에 미치는 영향

강보경(Bo-Kyeong Kang),김꽃봉우리(Koth-Bong-Woo-Ri Kim),정슬아(Seul-A Jung),김현지(Hyun-Ji Kim),정다현(Da-Hyun Jeong),박시우(Si-Woo Bark),최정수(Jung-Su Choi),최호덕(Ho-Duk Choi),안동현(Dong-Hyun Ahn) 한국식품영양과학회 2013 한국식품영양과학회지 Vol.42 No.7

박력분을 이용해 제조한 쿠키 반죽에 microwave, 가압가열, microwave 및 가압가열 병행 처리 후 오븐에 굽기 전후의 쿠키의 일반 특성과 품질에 미치는 영향을 알아보았다. 쿠키의 pH는 microwave 1분 처리한 경우 무처리구에 비해 약간 증가하였고, microwave 1분 처리 후 구운 경우와 가압가열 및 microwave 병행처리 후 구운 경우 감소함을 보였다. 수분 함량은 반죽에 가압가열 처리했을 경우 상당히 증가하였다. 쿠키의 색도 측정 결과 외부색에서 명도는 무처리구에 비해 모든 처리구에서 감소하였고, 적색도는 microwave 1분 처리한 경우를 제외하고 모든 처리구에서 무처리구에 비해 높은 값을 보였으며 황색도는 microwave 1분 후 구운 경우를 제외하고 무처리구에 비해 낮은 값을 보였다. 물성 측정 결과, 경도, 검성, 씹힘성, 전단력에서 가압가열 및 microwave 병행처리 후 구운 처리구가 가장 많은 증가를 보였다. 관능평가에서는 무처리구가 전체 항목에서 가장 높은 점수를 받았고, microwave 1분 처리 후 구운 경우가 무처리구와 유사한 기호도를 보임을 확인하였으며, 선행 연구에서 밀 gliadin의 항원성을 감소시키는데 효과가 좋았던 가압가열 및 microwave 병행처리구의 경우 색, 형태, 질감, 전체적 기호도에서 낮은 점수를 받았다. 따라서 가압가열 및 microwave 병행처리구에 대해 색, 형태, 질감, 전체적 기호도를 개선시킬 수 있는 대책을 마련한다면, 알레르기성이 저감화된 제품 개발에 적합할 것으로 사료된다. This study was conducted in order to determine the effect of autoclave and microwave treatments on cookies. Wheat dough was treated in an autoclave (30 min), a microwave (1 min), and both autoclave and microwave (30 min/1 min). The treated dough was baked or non-baked and cookies quality was assessed. The pH, moisture content, color, and texture were measured, and sensory evaluation was performed. The pH showed a slight increase when dough was treated in a microwave (before baking) and decreased in both the autoclave and autoclave/microwave (after baking) treatments. The moisture content showed a significant increase, compared to the control, in autoclave treatments. Regarding surface color of cookies, lightness was decreased in all treatments and redness was higher compared with the control, except for microwave (before baking), and yellowness was lower compared to the control, except for microwave treatment (after baking). Hardness, gumminess, chewiness, and shear force showed a significant increase when dough was treated in an autoclave/microwave (after baking) compared to the control. In the sensory evaluation, color, taste, texture, shape, and overall preference of cookies treated with an autoclave/microwave (after baking) showed a low score. These results suggest that autoclaving and microwaving may reduce the quality of bread and that preparation of countermeasures is necessary.

증기압 멸균 소독에 의한 치과용 석고의 물성변화

김연웅,이용근,김광만,김경남,조리라,정경호 大韓齒科器材學會 2003 대한치과재료학회지 Vol.30 No.1

Gypsum products have potential contamination by infectious human pathogens, which could be transmitted from patient to the gypsum model via impression materials. Therefore disinfection and sterilization of gypsum products are recommended. Steam sterilization: namely autoclaving is widely available in dentistry. The aim of this study was to investigate degradation of mechanical properties for dental gypsum after steam sterilization. The effect of autoclaving on compressive strength, weight loss and dimensional accuracy of specimens of commercial die stone such as Crystal Rock(CR : Maruishi), Die Keen(DK : Columbus Dental), Resin Rock(RR : Whip Mix), Tuff Rock(TR : Talladium) were estimated, and experimental gypsums{(EP) : 0.5wt% accelerator, 0.02wt% retarder, 0.1wt% surface agent, 0.1wt% Poly Vinyl Acetate} were also measured the above properties after autoclaving. For each group, five cylindrical(6㎜ in diameter and 12㎜ long) specimens made with manufactures water:powder ratio. All specimens were dried in oven until reaching the constant mass. After dried, they were autoclaved at 121℃ for 20 minute, dried again. Compressive strength was measured before and after autoclaving using mechanical testing machine at a cross-head speed of 0.5㎜/min. The dimensional accuracy was estimated by length change of specimens with digital caliper before and after autoclaving. For statistical analysis, ANOVA Tukeys Studentized Range(HSD) test and T test were used. Compressive strength and weight were decreased in all samples after autoclaving. There is significant difference between CR, DK and RR, TR in after autoclaving(p<0.05). EP exhibited the highest compressive strength after autoclaving. The weight was significantly decreased in all group except RR after autoclaving(p<0.05). The dimensional accuracy was not significantly increased in all group except CR. As this result, we found that resin-containing dental stone is more appropriate for autoclaving in dentistry.

Effect of high-dose irradiation and autoclave treatment on microbial safety and quality of ready-to-eat <i>Bulgogi</i> sauce

Park, Jin-Gyu,Song, Beom-Seok,Kim, Jae-Hun,Han, In-Jun,Yoon, Yohan,Chung, Hyung-Wook,Kim, Eun-Jeong,Gao, Meixu,Lee, Ju-Woon Elsevier 2012 Radiation physics and chemistry Vol.81 No.8

<P><B>Abstract</B></P><P>In Korea, commercialized sauce for ready-to-eat (RTE) <I>Bulgogi</I> is usually manufactured using heat treatment to ensure that it has a long shelf-life. However, heat treatment may adversely affect the taste and flavor of the sauce, thus, the development of suitable sterilizing methods for RTE sauces is necessary to preserve the quality of the sauce during long storage periods. In this study, total bacterial growth, the viscosity, and the sensory properties of <I>Bulgogi</I> sauce were compared between sterilization with gamma irradiation (0–40kGy) and autoclave treatment during storage at 35°C for 90 days. No bacterial growth was observed following irradiation at more than 10kGy or after autoclave treatment. However, the viscosity and sensory properties of samples gamma-irradiated at above 10kGy or autoclave-treated were significantly changed, even though autoclave treatment induced a burnt taste and flavor. Therefore, a gamma irradiation of 10kGy was effective to prepare ready-to-eat <I>Bulgogi</I> sauce with microbial safety and original sensory qualities.</P> <P><B>Highlights</B></P><P>► No bacterial growth in gamma-irradiated <I>Bulgogi</I> sauce ≥10kGy or autoclaved sample was observed. ► Viscosity of irradiated sample at 40kGy was similar to that of autoclaved sample. ► Sensory properties of irradiated sample >10kGy or autoclaved sample deteriorated.</P>

Comparison of the microstructure and compressive strength of Type 1 Portland cement paste between accelerated curing methods by microwave energy and autoclaving, and a saturated-lime deionized water curing method

Natt Makul,Dinesh Agrawal 한양대학교 세라믹연구소 2012 Journal of Ceramic Processing Research Vol.13 No.2

The microstructure and compressive strength of a 0.38 water-to-cement mass ratio (w/c) cement paste when subjected to accelerated-curing by microwave energy and autoclave curing were compared with a normal curing method by soaking in saturated-lime deionized water at 25 oC. The morphology, atom ratio of Si/Ca versus Al/Ca, phase composition by XRD, and compressive strength were measured in this study. The results indicate the presence of needle-like ettringite (Aft) in pastes that had been cured using the autoclave method. However, the saturated-lime deionized water cured paste showed lath-like or plate-like shapes and did not appear to produce ettringite (Aft). In addition, the microwave-cured paste indicated some evidence of ettringite. The range of Si/Ca and Al/Ca ratios of the autoclave-cured paste were 0.039− 0.052, and 0.207 − 0.234,respectively, while in the microwave-cured paste the ratio shifted to 0.079− 0.091. The compressive strength of the autoclavecured cement paste showed an increase in strength at an early age, while the strength decreased after 7 days of hydration.

물리적 처리에 의한 강력분 밀가루 Gliadin의 항원성 변화

강보경(Bo-Kyeong Kang),김꽃봉우리(Koth-Bong-Woo-Ri Kim),김민지(Min-Ji Kim),박시우(Si-Woo Bark),박원민(Won-Min Pak),김보람(Bo-Ram Kim),안나경(Na-Kyung Ahn),최연욱(Yeon-Uk Choi),최정수(Jung-Su Choi),최호덕(Ho-Duk Choi),안동현(Dong-Hyun A 한국식품영양과학회 2014 한국식품영양과학회지 Vol.43 No.4

본 연구에서는 가압가열 및 microwave 처리가 gliadin의 항원성에 미치는 영향을 살펴보기 위해 강력분에 가압가열과 microwave를 단독 또는 병행으로 처리하여 Ci-ELISA, SDS-PAGE 및 immunoblotting을 실시하였다. 가압가열 처리의 경우 시간이 길어질수록 IgG와의 결합력이 감소하였으며, 특히 50분 처리구에서 약 87%로 가장 낮은 결합력을 보였다. 또한 SDS-PAGE와 immunoblotting 결과에서도 무처리구에서 강하게 보였던 gliadin band가 가압가열처리에 의해 거의 소실되고 항체와 반응하지 않았다. 가압가열 및 microwave를 병행 처리 시도 마찬가지로 gliadin의 결합력이 감소하였으며, 처리구 중 가압가열 50분, microwave 5분 처리구에서 약 93%로 가장 낮은 결합력을 보였다. 반면 microwave를 단독으로 처리한 경우에는 일부 단백질의 변화는 관찰되었으나, 항원성 감소에는 효과가 없음을 확인하여 단백질 변화가 항원성에는 큰 효과를 준 것 같지 않다. 이상의 결과를 통해 가압가열 단독 처리 및 가압가열 및 microwave의 병행처리 시 gliadin의 항원성이 감소함을 확인하였다. This study was conducted to evaluate the effects of physical treatments on the antigenicity of gliadin in strong wheat flour. Strong wheat flour was treated with an autoclave (5, 10, 30, 50 min), a microwave (1, 5, 10 min), or both (10, 30, 50 min/ 5, 10 min), followed by SDS-PAGE, immunoblotting, and Ci-ELISA using anti-gliadin IgG. The results indicated that the binding ability of IgG to gliadin in strong wheat flour slightly decreased after autoclaving or autoclaving/microwaving. In particular, the binding ability was reduced to about 87% after autoclaving for 50 min and to 89% after autoclaving/microwaving (50/5 min). In addition, gliadin bands in the 50 min autoclaved group disappeared in both SDS-PAGE and immunoblotting. On the other hand, the antigenicity of gliadin was unaffected by microwaving alone. In conclusion, the results of this study suggest that autoclaving may reduce the antigenicity of gliadin in strong wheat flour.

다양한 가공 조건에서 curcuminoid의 화학안정성 및 항산화능 변화

이보현(Bo Hyun Lee),김다람(Daram Kim),강스미(Smee Kang),김미리(Mi-Ri Kim),홍정일(Jungil Hong) 한국식품과학회 2010 한국식품과학회지 Vol.42 No.1

생리활성 물질로 알려진 curcuminoid의 다양한 가공조건에서의 화학안정성 및 항산화능의 변화를 조사하였다. Curcuminoid의 화학안정성은 pH와 온도에 의해 크게 영향 받았으며, 온도 및 pH의 증가는 curcuminoid의 황색도 및 화학안정성을 감소시켰다. 특히 일반적인 멸균조건(121℃, 1.2기압)에서 액상의 curcuminoid를 고압가열처리 하였을 경우 80-90%의 황색도 감소 및 구조적 파괴를 초래하였다. 하지만 분말상태 curcuminoid 시료의 고압가열처리 시는 10% 미만의 감소가 있었다. 고압가열처리 후 curcumonoids의 DPPH 및 ABTS 라디칼 소거능은 각각 10.3 및 33.4%의 활성 감소를 보였으며, nitric oxide 소거능은 약간 증가하였다. 고압가열처리 후 각 curcuminoid의 잔류량의 분석 결과, curcumin 이 99% 이상 감소하여 고압가열처리에 가장 민감한 것으로 나타났고 BMC는 16.5% 잔류하였다. 본 연구는 생리활성 증강의 목적으로 식품 중에 첨가된 curcuminoid가 다양한 가공, 조리 과정을 통해 화학적 변화 및 활성의 변화를 가져올 수 있음을 보여주며, 이와 같은 생리활성 물질의 안정화를 위한 적절한 가공, 조리 방법들이 신중하게 고려되어야 함을 제시하고 있다. Curcuminoids are polyphenolic compounds and include curcumin and its derivatives possessing a yellow color. In the present study, changes in the chemical stability and antioxidant activities of curcuminoids, including curcumin, demethoxycurcumin (DMC), and bisdemethoxycurcumin (BMC), were investigated under various processing conditions. The yellowness of a mixture of the curcuminoids (79.4% curcumin, 16.8% DMC, and 3.8% BMC) at 405 nm was proportional to their amounts analyzed by HPLC. The curcuminoids became less stable with increases of pH and temperature during storage. Exposing a solution of the curcuminoids to autoclave conditions (121℃, 1.2 atm for 15 min) decreased residual curcuminoid levels by 80-90%; however, as a powder under the same conditions the curcuminoids were much more stable with less than 10% loss. After autoclave treatment, scavenging activities of the curcuminoids for DPPH and ABTS radicals were reduced by 10.3 and 33.4%, respectively, whereas nitric oxide scavenging activity was slightly increased. The residual levels of curcumin, DMC, and BMC after autoclaving were 0.7, 1.4, and 0.9%, respectively, indicating that curcumin was the most sensitive to autoclave treatment. The results indicate that under processing conditions, pH and temperature markedly affect the stability of curcuminoids and major losses of curcuminoids occur after autoclaving. These conditions should be considered when processing foods containing curcuminoids.

Pectin from Passion Fruit Fiber and Its Modification by Pectinmethylesterase

Juan Carlos Contreras-Esquivel,Cristobal N. Aguilar,Julio C. Montanez,Adriano Brandelli,Judith D. Espinoza-Perez,Catherine M.G.C. Renard 한국식품영양과학회 2010 Preventive Nutrition and Food Science Vol.15 No.1

Passion fruit fiber pectin gels represent a new alternative pectin source with potential for food and non-food applications on a commercial scale. Pectic polysaccharides were extracted from passion fruit (Passiflora edulis) fiber using citric acid as a clean catalyst and autoclaved for 20 to 60 min at 121℃. The best condition of pectin yield with the highest molecular weight was obtained with 1.0% of citric acid (250 ㎎/g dry passion fruit fiber pectin) for 20 min of autoclaving. Spectroscopic analyses by Fourier transform infrared, enzymatic degradation reactions, and ion-exchange chromatography assays showed that passion fruit pectin extracted for 20 min was homogeneous high methoxylated pectin (70%). Gel permeation analysis confirmed that the pectin extract obtained by autoclaving by 20 min showed higher molecular weights than those autoclaved for 40 and 60 min. Passion fruit pectin extracted for 20 min was enzymatically modified with fungal pectinmethylesterase to create restructured gels. Short autoclave treatment (20 min) with citric acid as extractant resulted in a significant increase of gel strength, improving pectin extraction in terms of functionality. The treatment of solubilized material (pectic polysaccharides) in the presence of insoluble material (cellulose and hemicellulose) with pectinmethylesterase and calcium led to the creation of a stiffer passion fruit fiber pectin gel, while syneresis was not observed.

Pectin from Passion Fruit Fiber and Its Modification by Pectinmethylesterase

Contreras-Esquivel, Juan Carlos,Aguilar, Cristobal N.,Montanez, Julio C.,Brandelli, Adriano,Espinoza-Perez, Judith D.,Renard, Catherine M.G.C. The Korean Society of Food Science and Nutrition 2010 Preventive Nutrition and Food Science Vol.15 No.1

Passion fruit fiber pectin gels represent a new alternative pectin source with potential for food and non-food applications on a commercial scale. Pectic polysaccharides were extracted from passion fruit (Passiflora edulis) fiber using citric acid as a clean catalyst and autoclaved for 20 to 60 min at $121^{\circ}C$. The best condition of pectin yield with the highest molecular weight was obtained with 1.0% of citric acid (250 mg/g dry passion fruit fiber pectin) for 20 min of autoclaving. Spectroscopic analyses by Fourier transform infrared, enzymatic degradation reactions, and ion-exchange chromatography assays showed that passion fruit pectin extracted for 20 min was homogeneous high methoxylated pectin (70%). Gel permeation analysis confirmed that the pectin extract obtained by autoclaving by 20 min showed higher molecular weights than those autoclaved for 40 and 60 min. Passion fruit pectin extracted for 20 min was enzymatically modified with fungal pectinmethylesterase to create restructured gels. Short autoclave treatment (20 min) with citric acid as extractant resulted in a significant increase of gel strength, improving pectin extraction in terms of functionality. The treatment of solubilized material (pectic polysaccharides) in the presence of insoluble material (cellulose and hemicellulose) with pectinmethylesterase and calcium led to the creation of a stiffer passion fruit fiber pectin gel, while syneresis was not observed.