트레드밀 운동시 흡기근 테이핑이 폐활량에 미치는 영향

김민지,신수영,송월섭,조수진,최동락,황미진,황진규,박진현,김경,Dennis W. Fell 대구대학교 특수교육재활과학연구소 2011 再活科學硏究 Vol.29 No.1

이 연구는 트레드밀 운동과 키네시오 테이핑의 효과에 따른 폐활량의 변화를 알아보기 위해 26명의 비흡연자가 참가하였으며 키네시오 테이핑을 적용하지 않은 그룹과 키네시오 테이핑을 적용한 두 그룹으로 무작위로 배정하고 각 군들을 주 3회 6주간의 트레드밀 훈련을 실시하였다. 실험 전과 후, 스파이로미터를 사용하여 키네시오 테이핑의 적용 따른 폐활량 변화 효과를 측정하였다. 이 연구의 결과를 종합해보면 키네시오 테이핑을 적용 그룹에서 적용하지 않은 그룹에 비해 FVC, FEV1에서 유의한 증가를 보였다. 이러한 결과는 건강한 성인에서 키네시오 테이핑을 적용한 경우 키네시오 테이핑을 적용하지 않고 트레드밀 운동을 한 경우보다 폐활량의 향상에 효과적이라고 생각되어진다. The purpose of this study was to investigate the variation of vital capacity(VC) according to the effects of kinesio taping with treadmill exercise. Twenty-six non-smokers were participated in this research and these subjects were randomly assigned into two groups. To measure the VC variation effects of kinesio taping, spirometer was used. The collected data were analyzed statistically by using a paired Mauchly test and repeated measure ANOVA. The results of this study were as follows; A group: treadmill with kinesio taping B group: treadmill without kinesio taping. Between A and B, there were significant differences. In the case of A group, there was 11.66% increase of VC, during 3 weeks experiment(p<.01). In the case of B group, there were significant differences, 3.35% increase of VC, during 3 weeks taping intervention(p<.01). After 6 weeks experiment, the improvement of VC shown a significant difference with intergroup (p<.05). From this result, it was revealed that treadmill exercise with kinesio taping was effective to improve VC to healthy adult than treadmill exercise without kinesio taping.

Improvement of adhesion properties of glass prepared using SiC‑deposited graphite mold via low‑temperature chemical vapor deposition

Kyoung‑Ho Kim,Kuk‑Jin Hwang,Heesoo Lee,Seong‑Min Jeong,이명현,배시영 한국세라믹학회 2020 한국세라믹학회지 Vol.57 No.1

Compression glass molding is a promising technique for mass production of near net-shaped, high-precision, and low-cost optical glass elements. However, the glass molding process causes the damage of glass and the mold during demolding because of the chemical or physical adhesion of the glass to the mold. To overcome this limitation, graphite molds are used owing to their good lubrication and easy machining. However, graphite materials show rapid oxidation at high temperatures in the presence of oxygen. Therefore, in this study, a thin SiC coating layer was deposited on the graphite mold using the chemical vapor deposition (CVD) method to utilize the lubrication properties of graphite and the anti-oxidation properties of SiC. The specimen obtained using the low-temperature CVD method showed high carbon content and good lubrication properties than that obtained using the high-temperature CVD method.

폐 FRP/Urethane Foam 충진 혼성복합재의 제조 및 기계적 물성에 관한 연구

황택성,신경섭,박진원 공주대학교 자원재활용신소재지역협력센터 2000 2차년도 센터 사업 성과집 Vol.2000 No.1

욕조 생산시 발생하는 폐 FRP와 냉장고 등 가전품과 폐단열재로부터 발생하는 폐우레탄폼을 흡음 및 경량판재로 재활용하기 위하여 불포화 폴리에스테르 매트릭스 수지에 보강하여 복합재를 제조하였다. 또한 충진재의 함량의 변화가 복합재의 기계적 물성에 미치는 영향과 기지와 보강재간의 계면현상을 관찰하였다. 충진제의 함량이 70 wt%인 복합재의 인장강도는 82.34MPa로 가장 우수하였으며, 인장탄성율은 보강재의 함량이 증가함에 따라 감소하였다. 또한 굴곡강도와 굴곡탄성율은 폐FRP의 함량이 70wt% 충진된 복합재가 가장 우수하였으며, 그 값은 각각 72.5, 958.4MPa이었다. SEM 관찰 결과 70 wt% 충진된 충진제 매트릭스 수지의 계면에서 pull out 현상이 확인되지 않았으며 균열도 발생하지 않았고, 매트릭스 수지내에 충진된 폐 FRP/우레탄폼 충진제가 잘 분산되어 있음을 확인할 수 있었다. The waste FRP oocured in the fabrication of SMC (sheet molding campound) bathtubs and the waste polyurethane foam occured in electronic manufacture and waste insulator were applied as a soundproof and light weight pannel in the waste FRP unsaturated polyester matrix resin composites to recycle. The effect of filler contents of the mechanical properties and interfacial phenomena of the filler and matrix on the composites was evaluated. The tensile strength of composites reached its maximum value of 82.34 MPa when the filler content was 70 wt%, and the more content of reinforcement is increased, the more tensile modulus was decreased. The flexural strength and modulus of csomposites, reinforced 70 wt% with filler content, were dominant compared to the other samples to 72.5 Mpa, 958.4 MPa respectively. When composite of reinforced 70 wt% with filler content, it was confirmed that pull out phenomena and cracks did not occur in the interface of reinforcement and matrix resin through the SEM observation. Also, waste FRP and urethane foam were dispersed well into matrix resin as filler.

지대치 재료의 환경변화에 따른 물리적 성질에 관한 연구

황유숙,최경규,박상진 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.2

The purpose of this study was to measure the flexural strength and hardness of four core materials in 4 different medias and to evaluate the relationship between the physical properties. For the flexural strength, the specimens were prepared from each of the following materials: Bisfil Core, Core Max, Fuji IX GP, Miracle Mix and randomly divided into four groups and stored at 37 degree C in the following medias: distilled water for 24 hours (DW/1), distilled water for 30 days (DW/30). 2%NaF for 30 days (NF/30), 0.02N lactic acid for 30 days (LA/30). After storage, the specimens were subjected to flexural strength testing and calculated to flexural modulus. For hardness testing, specimens were prepared from four materials and storaged in the uniform way. After storage, the specimens were subjected to Vicker's hardness testing. 1. The flexural strength of Core Max were the highest, and the flexural strength of Miracle Mix were the lowest. 2. The hardness of Bisfil Core were the highest. 3. The hardness of Core Max were the highest. 4. The hardness of Miracle Mix were the lowest. 5. 2%NaF and 0.02N lactic acid negatively affected the flexural strength and hardness of four core materials. 비금속 지대치 재료의 구강 내 환경변화에 따른 물리적 성질을 구명하기 위하여 4종의 지대치 재료를 다양한 환경에 보관한 후 굴곡강도 및 표면경도의 변화를 관찰하여 조건에 따른 영향을 구명하고자 이 연구를 시행하였다. Bisfil Core, Core Max, Fuji IX GP, Miracle Mix를 사용하여 굴곡강도 측정을 위한 시편을 제작한 후 최대하중을 측정하여 굴곡강도와 굴곡탄성계수를 계산하였다. 표면경도 측정을 위하여 아크릴릭 레진블럭에 상기 4종의 재료를 충전하여 중합시킨 후 순차 연마하여 경도측정을 위한 시편을 제작하고 Vickers hardness를 계산하였다. 1. 굴곡강도는 Core Max에서 가장 높고 Miracle Mix에서 가장 낮았다. 2. 37℃ 증류수에 24시간 보관한 군에서 Bisfil Core가 경도가 가장 높았다. 3. 30일 저장군에서는 Core Max가 경도가 가장 높았다. 4. 모든 군에서 Miracle Mix가 가장 낮은 경도를 나타냈다. 5. 2% NaF용액과 0.02N lactic acid용액은 증류수보다 지대치 재료의 굴곡강도와 표면경도를 저하시켰다.

혼수상태의 외상환자에서 초음파를 이용한 흉부 및 복부손상의 진단

임경수,이강현,이진웅,이부수,황성오,유수영,강성준 대한응급의학회 1995 대한응급의학회지 Vol.6 No.1

The need for rapid diagnosis and treatment of life-threatening thoracic and intra-abdominal injury result in controversy over the appropriate triage of unconscious blunt trauma patients. To aid in early decisions for these patients, a prospective analysis of 98 patients with glasgow coma scale(GCS) scores≤8 was undertaken. Although intra-thoracic and intra-abdominal injuries were frequently identified based on systolic blood ressure, the use of clinical signs alone resulted in more missed injuries than did using the emergency ultrasonography. In normotensive patients(n=34), intra-thoracic injuries was identified in one patient(2.9%), and intra-abdominal injuries were in 7 patients(20.6%). In shock(systolic blood pressure<90mmHg) Pa-tients(n=64), thoracic injuries and intra-abdominal injuries were diagnosed in 8(12.5%) and 27 patients(42.3%), thoracic and abdominal combined injuries were identified in 11 patients(17.2%). The sensitivity, specificity, and accuracy of emergency ultrasonography were 96.3%, 91.7%, 94.9%. This study suggests that all unconscious trauma patients undergo immediate emergency ultrasonography to prevent missing life-threatening injuries.

외상후 혈뇨환자에서 응급 초음파검사의 의의

임경수,이강현,황성오,이진웅 대한응급의학회 1996 대한응급의학회지 Vol.7 No.2

The Ultrasonography is rapid, mobile, and noninvasive diagnostic tool in emergency center. As a result, we estimate it`s value as an advocated primary diagnostic modality in the immediate evaluation of patients with multiple trauma. We investigated 60 patients with traumatic hematuria(microscopic hematuria or gross hematuria) who visited our emergency department from 1995, July to 1996, March. To evaluate the injury of urinary systems, emergency physician examined patients with hematuria by ultrasonography, and comapared the results with those of excretory urography and computed tomography. We demonstrated 21 positive findings for abnormal fluid collection and renal parenchymal injury and bladder rupture on ultrasonography. All bladder injuries were diagnosised by ultrasonography, and all major renal injury(grade Ⅲ,Ⅳ,Ⅴ) were also diagnosised by that. The accuracy of emergency ultrasound examination in traumatic hematuria was 97.0%, and sensitivity was 95.0% with specificity of 97.4%. The ultrasonography was an accurate diagnostic adjunct in detecting renal injury and bladder injury in traumatic hematuria patients. Ultrasonography provides an excellent noninvasive diagnostic tool for the initial screening study of patients with traumatic hematuria.

다발성 외상환자에서 필수적 단순 방사선검사의 의의

임경수,황성오,임종천,이부수,이강현,이진웅 대한응급의학회 1995 대한응급의학회지 Vol.6 No.2

In the guidelines of Advanced Trauma Life Support(ATLS), essential plane roentgenograms (chest AP vIew, cervical spine lateral view and pelvis AP view) are recommanded when primary survey and resuscitation phase are finished in care of multiple injured patients. A prospective study was carried on 376 multiple trauma patients who admitted to Wonju Christian Hospital from July, 1995 to October. We analyzed clinical significance of essential X-ray in multiple trauma patients, and classified the patients by their status of mentality. The one is alert group when their Glasgow Coma Scale(GCS) is over 13 point, the other is disoriented mentality group when their GCS are below 12 point. The alert group was redivided by presence of clnical symptoms and/or signs, and clinical significances of essential X-ray were analyzed. Among the 376 patients, 330 patients are alert group that their GCS score is over 13 point and 46 patients are disoriented group who's GCS were below 12 point. The detection rate of abnormality in essential X-ray is higher in disoriented group than alert group(cervical-spine lateral view : 13.5% vs 3.0% cheat AP view : 0.4%, pelvis AP view : 0%). This study suggests that their are no needs of taking essential X-ray in patients who is alert in mental state and have no clinical symptoms and/or signs.

교정학적 적용을 위한 초내식성 스테인리스강의 특성

오근택,김금진,황충주,박용수,김경남 大韓齒科器材學會 2001 대한치과재료학회지 Vol.28 No.3

Various kinds of orthodontic appliances have been developed for ideal tooth movement during orthodontic treatment. The orthodontic appliances made of metals are bands, arch wires, brackets and miniscrews as orthodontic anchorage. Generally, these appliances are made of stainless steel, pure titanium, Ni-Ti and TMA with the proper biocompatibility. However, localized corrosion of these materials can frequently occur in the particular environment. Super stainless steels, recently developed, have good corrosion resistance to reduce metal ion release induced by many kinds of corrosion. Recently, it has been reported that nickel ion release from orthodontic appliances affect the prevalence of nickel sensitization; however, there has been some controversy about nickel hypersensitivity to orthodontic appliances containing nickel. The purpose of this study was to evaluate and compare the microhardness, nickel ion release, corrosion resistance and cytotoxicity of 4 types of super stainless steels and 316L stainless steel as the control group according to nickel contents, and to determine the acceptability as the new material for various kinds of orthodontic appliances. All super stainless steels showed higher microhardness than 316L stainless steel, SR-3Mo showed especially the highest microhardness. In anodic polarization test, corrosion resistance was high in order of SR-50A, SFSS, SR-6DX, 316L stainless steel, SR-3Mo. There was no increase in nickel ion release from SR-50A, SR-6DX, 316L stainless steel with immersion time in artificial saliva; whereas there was some increase from SFSS and SR-3Mo with immersion time. All super stainless steels showed very low cytotoxicity regardless of nickel contents although SR-3Mo showed relatively higher cytotoxicity than the others. It is concluded that SR-50A among super stainless steels has the highest corrosion resistance and biocompatibility. It is undesirable to consider the alloys with high nickel content to release lots of nickel ion.

초내식성 스테인리스강 선재와 브라켓의 내식성 및 금속 이온 용출 특성

오근택,정경진,황충주,박용수,김경남 大韓齒科器材學會 2001 대한치과재료학회지 Vol.28 No.4

Metallic orthodontic appliances are known to release metal ions in an oral cavity. It is not advisable that toxic corrosion products derived from the appliances is absorbed into the body. Metal ions release from orthodontic appliances is known to have large effects on the result of orthodontic treatment and systemic health. Metal bracket and wire were made of super stainless steel(S32050) with high corrosion resistance. The corrosion resistance and ion release property of S32050 and conventionally used appliances were examined. Four types of wire were ligated in either super stainless steel(SB) or Tomy bracket(TB) with O-ring, and then each group was immersed in an artificial saliva at 37℃ for 12 weeks. Amount of released metal ions was measured with immersion time by graphite furnace atomic absorption spectroscopy and surface morphology was investigated. S32050 showed the low passive current density of about 1 μA/㎠ and the stable passive region to a high potential in artificial saliva. S32050 appliances did hardly release nickel ions in artificial saliva. S32050 wire(SRW) and NiTi wire(NW) didn't show significant difference of Ni ion release with immersion time, meanwhile, Remanium wire(RW) showed significant difference in 12 weeks. Ni ion releasce from the brackets didn't show any significant difference with immersion time and between SB and TB. Amounts of Ni ion released from TB-SRW showed significant difference in 12 weeks, those from TB-RW showed significant difference from 4 weeks later and highest release among all groupsin12weeks. TB-NW released little Ni ion for all immersion time and showed significant difference from 4 weeks later, TB-TW(TMA wire) showed significant difference in 12 weks. SB-SRW didn't show any significant difference and SB-RW signigicant difference in 12 weeks,but lower compared with TB group. SB-NW and SB-TW didn't show any significant difference. Corrosion products didn't be observed in mostly groups during the immersion time, except that in TB-RW, they were observed on the bracket surface between O-ring and wire from 8 weeks later. Super stainless steel wire had good corrosion resistance compared with stainless steel wire, and it is believed that it can be used as orthodontic material for bracket and wire.

RAW 264.7 세포에 대한 중국산 천연 광물성 섬유 TAFMAG의 독성효과

임영,한진구,김지홍,김현욱,김은경,김경아,장황신 大韓産業醫學會 1999 대한직업환경의학회지 Vol.11 No.3

Objectives : This study was designed to evaluate cytotoxicity of TAFMAG, which is a trade name of natural mineral fiber mined and produced in China. Methods : The cytotoxicity of TAFMAG was evaluated by measuring iron content, lipid peroxidation, erythrocyte hemolysis, and cytotoxicity in vitro. These results were compared with the data of chrystotile and wollastonite as a positive and negative control, respectively. Results : There was significant increase of Fenton activity in TAFMAG and chrysotile with dose-response pattern. The iron chelating agent, desferrioxamine, significantly decreased Fenton activity of the particulates except wollastonite. TAFMAG and chrysotile fibers significantly increased malondialdehyde concentration from lipid peroxidation of the red blood cell membrane. In erythrocyte hemolysis test, TAFMAG & chrysotile had stronger effect on erythrocyte hemolysis than wollastonite with the concentration of 1,000g/ml. Furthermore, TAFMAG was more hemolytic than chrysotile with the concentration of 5,000g/ml. There was a significant cytotoxic effect in TAFMAG and chrysotile on RAW cell compared with wollastonite. Conclusions : In vitro study suggested that TAFMAG may have a similar health hazard as usual asbestos.