Effect of Prior Microstructures on Cementite Dissolution Behavior During Subcritical Annealing of High Carbon Steels

Xiao‑Yu Zhao,Xian‑Ming Zhao,Chun‑Yu Dong,Yang Yang,Huai‑Bin Han 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.6

The variation of the morphology and distribution of cementite particles in different prior structures with spheroidizingannealing process has been proceeded in this paper. It is found that the dissolution and coarsening progresses of variousinitial structures in spheroidizing annealing process are quite asynchronous due to the different interlamellar spacing. Thedissolution rate of degenerated pearlite (D-P) with finer interlamellar spacing is faster. The granular cementite in the spheroidizedmicrostructure is fine, uniform and dense. The mean diameter of spherical cementite is refined to 233 nm. However,the initial structure of degenerated pearlite (D-P) is highly sensitive to the austenitization temperature. The cementite iseasy to be coarsened under high austenitizing temperature. The coarsening is accompanied by the gradual increase of theCr content in the cementite, which increases the stability of the cementite. Therefore, the optimal austenitizing temperaturefor degenerated pearlite (D-P) is suggested to be 770 °C.

Transcriptome profiling of rubber tree (Hevea brasiliensis) discovers candidate regulators of the cold stress respo

Xiao‑Xiao Gong,Bing‑Yu Yan,Jin Hu,Cui‑Ping Yang,Yi‑Jian Li,Jin‑Ping Liu,Wen‑Bin Liao 한국유전학회 2018 Genes & Genomics Vol.40 No.11

Tropical plant rubber tree (Hevea brasiliensis) is the sole source of commercial natural rubber and low-temperature stress is the most important limiting factor for its cultivation. To characterize the gene expression profiles of H. brasiliensis under the cold stress and discover the key cold stress-induced genes. Three cDNA libraries, CT (control), LT2 (cold treatment at 4 °C for 2 h) and LT24 (cold treatment at 4 °C for 24 h) were constructed for RNA sequencing (RNA-Seq) and gene expression profiling. Quantitative real time PCR (qRT-PCR) was conducted to validate the RNA-Seq and gene differentially expression results. A total of 1457 and 2328 differentially expressed genes (DEGs) in LT2 and LT24 compared with CT were respectively detected. Most significantly enriched KEGG pathways included flavonoid biosynthesis, phenylpropanoid biosynthesis, plant hormone signal transduction, cutin, suberine and wax biosynthesis, Pentose and glucuronate interconversions, phenylalanine metabolism and starch and sucrose metabolism. A total of 239 transcription factors (TFs) were differentially expressed following 2 h or/and 24 h of cold treatment. Cold-response transcription factor families included ARR-B, B3, BES1, bHLH, C2H, CO-like, Dof, ERF, FAR1, G2-like, GRAS, GRF, HD-ZIP, HSF, LBD, MIKC-MADS, M-type MADS, MYB, MYB-related, NAC, RAV, SRS, TALE, TCP, Trihelix, WOX, WRKY, YABBY and ZF-HD. The genome-wide transcriptional response of rubber tree to the cold treatments were determined and a large number of DEGs were characterized including 239 transcription factors, providing important clues for further elucidation of the mechanisms of cold stress responses in rubber tree.

Effect of Different Cooling Rates in High Rheological Rate Forming Process on Mechanical Properties of Zr57Cu20Al10Ni8Ag5 Bulk Metallic Glass

Xiao‑Bo Mei,Bao‑Chuan Liu,Wei Jiang,Quan Xu,Qi‑Dong Zhang,Yu‑Bai Ma,Fang‑Qiu Zu 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.9

The influence of cooling rates on the mechanical properties of a Zr-based bulk metallic glass prepared with high rheologicalrate forming (HRRF) was investigated and compared with traditional suction cast methods. Amorphous samples of Zr57Cu-20Ni8Al10Ag5 were prepared in copper molds with different sizes in order to obtain different cooling rates for both HRRFand traditional cast methods. These specimens were subjected to compression experiments, including microhardness testing,X-ray diffraction testing and differential scanning calorimetry analysis. The results indicate that the plasticity of the samplesformed by HRRF are higher than that of the as-cast ones at the same cooling rates, while the microhardness manifests theopposite principle. As the cooling rate increases further, the difference in plasticity further increases between two methods,indicating that the plasticity of metallic glasses is more sensitive to cooling rates during the HRRF process. At the core ofthis phenomenon is the fact that HRRF methods can introduce more free volume into glasses than traditional cast methodswith an elevated cooling rate are able to.

Axial Resistance of Bored Piles Socketed into Soft Rock

Xiao-yu Chen,Ming-yi Zhang,Xiao-yu Bai 대한토목학회 2019 KSCE Journal of Civil Engineering Vol.23 No.1

Three fully-instrumented full-scale static load tests were conducted on three 0.8-m-diameter bored piles socketed at 3.2 m deep into argillaceous siltstone (1.6 and 1.6 deep into strong and medium decomposed siltstones, respectively) in Qingdao, China. About 50% of head load was transmitted and supported by base resistance at the end of the tests. Totally 53 test piles socketed into soft rock with unconfined compressive strength less than 20 MPa in Qingdao were reviewed. The measured side resistance along shaft socked into rock was compared with prediction using empirical methods in literatures based on database from Qingdao projects.

Cloning and Characterization of a Novel Mannanase from Paenibacillus sp. BME-14

( Xiao Yu Fu ),( Xiao Luo Huang ),( Peng Fu Liu ),( Ling Lin ),( Gao Bing Wu ),( Chan Juan Li ),( Chun Fang Feng ),( Yu Zhi Hong ) 한국미생물 · 생명공학회 2010 Journal of microbiology and biotechnology Vol.20 No.3

Research on Aesthetic Preferences for Transparency and Glossiness in Optical Phenomena-Focused on Evolutionary Aesthetics-

Xiao, Xiao Yu(샤오샤오유),Cho, Taig Youn(조택연) 한국디자인문화학회 2023 한국디자인문화학회지 Vol.29 No.4

Transparency and glossiness are optical properties that are usually associated with each other, and both of these physical characteristics can influence people’s aesthetic experiences. Visuals, products, architecture, and spatial design that possess transparency and glossiness are generally viewed positively. This article analyzes how visual processing of optical properties is based on optical theory and explains how aesthetic preferences for transparency and glossiness, as defined optically, operate from an evolutionary aesthetic perspective. This research suggests that the aesthetic preference for glossiness may stem from a desire for clear water, which can be inferred from the shimmering on the water’s surface. Furthermore, the preference for transparency may be rooted in the selection of ripe fruits from translucent visual stimuli, possibly associated with an increase in sweetness resulting from the breakdown of polysaccharides. Additionally, the study finds that the degree of transparency and glossiness can influence aesthetic preferences. To validate this point, behavioral experiments on preferences for transparency and glossiness were conducted. Behavioral analysis of the participants in the experiments revealed that aesthetic preferences for transparency and glossiness are widespread, with higher transparency and a clearer gloss eliciting stronger aesthetic preference responses. This suggests that the most pronounced aesthetic preference responses occur when high transparency and a bright gloss work together. The goal of this study is to explore the structure of aesthetic preference responses for transparency and glossiness, validate them behaviorally, and discover further combinations of transparency and glossiness levels, as well as the ways in which these two visual stimuli induce aesthetic preferences, to provide a theoretical basis for design applications.

Taguchi Approach for Anti-heat Stress Prescription Compatibility in Mice Spleen Lymphocytes In Vitro

Xiao-yu Zhu,Gui-lin Cheng,Feng-hua Liu,Jin Yu,Yu-jie Wang,Tong-quan Yu,Jian-qin Xu,Ming Wang 대한약학회 2011 Archives of Pharmacal Research Vol.34 No.7

Heat stress (HS) may induce immunosuppression as well as inhibit the proliferation of lymphocytes. This study evaluated the effects on immune function of our prescription on splenic lymphocytes under HS as well as its compatibility. The effects of four herbal extracts from Agastache rugosa, Atractylodes lancea, Cortex Phellodendri, and Gypsum Fibrosum on heat treated splenic lymphocytes were investigated and the compatibility of the prescription was also explored by using the Taguchi method. This study revealed changes in proliferation by traditional Chinese medicines of splenic lymphocytes after HS. Proliferation in the HS group was significantly lower than the control group. Under HS, the effects of higher concentrations of Agastache rugosa (100 and 200 μg/mL), Atractylodes lancea (100 and 200 μg/mL), Cortex Phellodendri (50 and 100 μg/mL) and Gypsum Fibrosum (100 and 200 μg/mL) caused a significant increase on ConA/LPS-induced proliferation of lymphocytes than lower concentrations. We, therefore, conclude that the prescription of traditional Chinese medicines may recover splenic lymphocytes from the immunosuppression induced by HS. The Taguchi design, which allows rapid and high efficiency for the selection of the best conditions for our prescription on HS-treated splenic lymphocytes, demonstrated that Agastache rugosa (200 μg/mL), Atractylodes lancea (200 μg/mL), Cortex Phellodendri (100 μg/mL) and Gypsum Fibrosum (100 μg/mL)were the optimal conditions for the prescription. The validation experiment confirmed that our composition in optimum extraction conditions enhanced effects on ConA or LPS-stimulated lymphocytes under HS. The results showed that the Taguchi optimization approach is a suitable method for optimization of the composition of prescription.

Microstructure evolution and effect on deuterium retention in oxide dispersion strengthened tungsten during He⁺ irradiation

Ding, Xiao-Yu,Xu, Qiu,Zhu, Xiao-yong,Luo, Lai-Ma,Huang, Jian-Jun,Yu, Bin,Gao, Xiang,Li, Jian-Gang,Wu, Yu-Cheng Korean Nuclear Society 2020 Nuclear Engineering and Technology Vol.52 No.12

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.

Production of Cellulase by Trichoderma reesei Rut C30 in Wheat Bran - containing Media

( Xiao Bin Yu,Hyun Shik Yun,Yoon Mo Koo ) 한국미생물생명공학회 1998 Journal of microbiology and biotechnology Vol.8 No.3

Establishment of a model to evaluate the nutritional quality of Bombyx mori Linnaeus (Lepidoptera, Bombycidae) pupae lipid based on principal components

Yu-Xiao Zou,Teng-Gen Hu,Ying Shi,Jun Liu,Li-Xia Mu,Yang Xiao,Sen-Tai Liao 한국응용곤충학회 2017 Journal of Asia-Pacific Entomology Vol.20 No.4

Silkworm pupae are a source of edible lipid with a high content of unsaturated fatty acids (UFAs) (70% of total lipid content) and are becoming a focus of pharmaceutical and dietary research in the functional oil field. To study the nutritional value of different silkworm strains, principal component analysis (PCA) was used to establish a mathematical model and cluster analysis on silkworm pupae lipid (SPL) in 90 strains based on Z-score. Single-factor correlation analysis indicated that the PUFAs content was significantly positively correlated with the α-linolenic acid (ALA) (ρ=0.98) and negatively correlated with the oleic acid (OA) (ρ=−0.73) contents, and comprehensive of principal components mathematical model (PC =0.148ZX1 +0.00 2ZX2 −0.197ZX3 −0.338ZX4 +0.220ZX5 +0.304ZX6 +0.314ZX7, ZXi is the standard score (Z-score) of X1, which was calculated as follow: ZXi = (Xi −−X )/S, where X1: palmitic acid, X2: palmitoleic acid, X3: stearic acid, X4: OA, X5: linoleic acid, X6: ALA, X7: PUFAs.−X is the arithmetic mean content of variable i, and S is the standard deviation of variable i for all samples included in the analysis.) showed the amount of ALA and PUFAs were the key factors determining the nutritional value of the pupae lipid. Cluster analysis on the composite scores calculated by the model of the principal component divided the 90 strains into three groups. A cluster of 6 strains (XHR, XIFF, ZX, YT, YO and BTN) with the best nutritional value was characterized by high contents of ALA and PUFAs and a low content of oleic acid.