http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sangseok Bae,Donggeun Kim,Seoyong Kim 위기관리 이론과 실천 2018 Crisisonomy Vol.14 No.12
후쿠시마 원전사고는 원자력 에너지에 대한 태도변화에 매우 큰 영향을 미쳤다. 이러한 태도변화는 탈원자력이라는 에너지전환에 영향을 미친다. 본 연구의 목적은 후쿠시마 원전사고 이후 태도변화 의 결정요인을 분석하는데 있다. 태도변화는 단순히 개인적 차원의 변수뿐만 아니라 맥락적 차원의 변수들로부터 영향을 받기 때문에 미시적인 개인적 수준의 변수뿐만 아니라 거시적인 국가수준의 변수를 태도변화의 원인변수로 설정할 필요가 있다. 본 연구에서는 후쿠시마 원전사고 이후 태도변 화를 종속변수로 설정하였으며, 개인수준에서 인구학적 변수, 매스미디어 변수, 지각변수 등, 국가수 준에서는 원전의존성, GDP, 후쿠시마 원전으로부터의 거리, 환경의 질 등을 독립변수로 설정하여 다수준 분석을 실시하였다. 분석결과 개인적 수준에서는 남성(-), 교육수준(+), 종교(+), 위험지각(+), 신뢰(-) 등이 원자력에 대한 지지에서 반대로의 태도변화에 유의하게 영향을 미치고 있었으며, 국가 수준에서는 원전운영(-), GDP(+)이 영향을 미치고 있었다. The Fukushima nuclear accident had a significant impact on the attitude change toward nuclear energy. This attitude change critically influences the energy transition, in particular, phaseout of nuclear energy. The purpose of this study is to analyze the determinants of attitude change toward nuclear energy after the Fukushima accident. Since the attitude change is influenced not only by the individual variables but also by the contextual variables, it is necessary to set both the macro country-level variables and the micro individual-level variables as the causal variables of the attitude change. Empirical findings summarize that male, education, religion, risk perception, and trust at the individual level, and operation of nuclear power plant, GDP per capita at the country level had a crucial impact on attitude change from supporting to opposing.
단순모델을 이용한 막 가습기 열 및 물질 전달 특성 해석
유상석(Sangseok Yu),이영덕(Youngduk Lee),배호준(Hojune Bae),황준영(Joonyoung Hwang),안국영(Kookyoung Ahn) 대한기계학회 2009 大韓機械學會論文集B Vol.33 No.8
The performance of proton exchange membrane fuel cell (PEMFC) is seriously changed by the humidification condition which is intrinsic characteristics of the PEMFC. Typically, the humidification of fuel cell is carried out with internal or external humidifier. A membrane humidifier is applied to the external humidification of residential power generation fuel cell due to its convenience and high performance. In this study, a simple static model is constructed to understand the physical phenomena of the membrane humidifier in terms of geometric parameters and operating parameters. The model utilizes the concept of shell and tube heat exchanger but the model is also able to estimate the mass transport through the membrane. Model is constructed with FORTRAN under Matlab/Simulink<SUP>®</SUP>□ environment to keep consistency with other components model which we already developed. Results shows that the humidity of wet gas and membrane thickness are critical parameters to improve the performance of the humidifier
공기 유량 변화에 따른 이온교환막 연료전지용막 가습기의 동특성응답
배호준(Hojune Bae),김용모(Yongmo Kim),유상석(Sangseok Yu),안국영(kookyoung Ahn),이영덕(Youngduk Lee) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
The efficiency and life time of the proton exchange membrane (PEM) fuel cell system is critically changed with its humidity which should be maintained properly during dynamic operation. Membrane humidifier is used for the water management of the PEMFC due to its reliable performance and the feature of zero parasitic power loss. In the PEMFC system, membrane humidifier is required to regulate proper humidity level for the design point of the fuel cell. During transient operation of the PEMFC system, it is difficult to control the humidity of the PEMFC system properly. However, few literatures are reported for the dynamic response of the membrane humidifier even though it is very important for durability of the system. In this study, we presented the performance variation of the membrane humidifier during transient conditions. Dry air pressure, water flow temperature, and air flow rate were chosen as the operating parameters. Results shows that time constant for dynamic response of membrane humidifier is small enough. Flow rate and differential pressure between dry air and water are important factor in the performance of membrane humidifier.
이온교환막 연료전지용 원통형 막 가습기의 열 및 물질전달특성 기초 연구
배호준(Hojune Bae),안국영(Kook Young Ahn),이영덕(Young Duk Lee),강상규(Sang Kyu Kang),유상석(Sangseok Yu) 대한기계학회 2011 大韓機械學會論文集B Vol.35 No.5
막 가습기는 다른 가습장치와는 달리, 기생 전력의 손실이 없고 가습 성능이 우수하여 이온교환막 연료전지의 외부 가습을 위해 적용되고 있다. 원통형 막 가습기는 특히 가습성능에 비해 요구 체적이 매우 작기 때문에, 수송용 및 가정용 이온교환막 연료전지에 적용된다. 막가습기의 최적 설계를 위한 열 및 물질 전달 특성에 대한 이해가 필요하지만, 아직 다양한 연구가 이루어지고 있지 않다. 본 연구에서는 원통형 막가습기의 열 및 물질 전달 특성을 이해하기 위한 특성 실험을 수행하였다. 기존의 습도 측정계는 비정상 가습 특성 실험에 한계가 있고, 정상 상태에서도 고온 다습한 환경에서는 오차가 크기 때문에 본 연구에서는 습증기 응축법을 이용하였다. 가습기의 정상상태 특성을 확인하기 위해 압력과 온도 변화에 대한 실험을 수행하였으며, 비정상 특성을 확인하기 위해 순간 유량 변화 시의 가습 성능을 측정하였다. 본 연구에서는 이상의 기초 실험을 통해서 막 가습기의 성능에 영향을 미치는 주요 인자를 확인하였으며, 원통형 막가습기의 기초적인 열 및 물질 전달 특성을 이해하였다. The proton exchange membrane (PEM) fuel cell system is critically dependent on the humidity, which should be properly maintained over the entire operating range. A membrane humidifier is used for the water management in the PEMFC because of the membrane humidifier’s reliable performance and zero parasitic power loss. In the PEMFC system, the membrane humidifier is required to provide appropriate humidity for the design point of the fuel cell. Although the performance of the fuel cell depends on the performance of the humidifier, few studies have provided a systematic analysis of the humidifier. We carry out an experimental analysis of the membrane humidifier using a vapor condensation bottle. The dry air pressure, water flow temperature, and air flow rate were chosen as the operating parameters. The results show that the time constant for the dynamic response of the membrane humidifier is relatively short, but additional analysis should be carried out.
STAR-CCM+를 활용한 유체/구조 연성해석의 주요 변수에 대한 연구
이유철(YooChul Lee),이상석(SangSeok Lee),배혜림(HyeRim Bae) (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
In numerical simulation domain, more complex physics are getting involved to explain real phenomena in engineering activities due to acceptable computing powers and stable efforts among seeking labors for multiphysics. Even though several commercial software companies have released their own methodologies for Fluid Structural Interaction problems, the successful application results are not as many as expected. In this study, the reasons of rare cases in real Fluid Structural Interaction applications and some important coupling configurations are investigated. The problems are based on the publication and various parameters for different governing equations are adopted to provide the general insights for engineers who need FSI analysis capabilities especially in partitioned approaches. The main scope in this paper is the tight two way coupling scheme for Computational Fluid Dynamics and Computational Structural Mechanics for better convergence with minimized calculation errors in shorter computing time. Among various commercial solutions for interaction analysis, the results are studied between STAR-CCM+ V6.06 and ABAQUS 6.11 to realize parametric effects on variants in numerical results and convergence problems through coupling scheme itself.