1930년대 후반 식민지 조선 농민 생활상의 재구성

조명근(Cho, Myung?keun) 호서사학회 2015 역사와 담론 Vol.0 No.76

1939년 여름 홋카이도제국대학 농학부 학생인 안병렬은 자신의 고향인 오곡리 주민을 대상으로 생활환경과 보건위생 등을 조사하였다. 조사대상은 61호로 가구당 6.8인이 거주하였고 소작농이 절대다수를 점하고 있었다. 각 가구당 평균 부채액이 140원에 달할 정도로 많았는데, 대부분 양식과 생필품을 구입하기 위해 빚을 진 것이었다. 아동(7~15세)의 경우 23%만이 학교를 다녔고 1인당 세 종류 이상의 노동에 동원되고 있었다. 의복의 경우 옷이라고 부를 수 있을 만한 외출복이 10% 밖에 안 되었고 식량은 주식인 쌀의 경우 1인당 소비량이 0.4석으로 당시 조선의 평균치보다 낮은 수치였다. 대부분의 주택이 천정․벽지 등의 미비와 채광 및 통풍의 불량 등으로 인해 비위생적인 환경에서 벗어날 수 없었다. 의료 기관의 절대적인 부족과 높은 진료비로 인해 의료 혜택은 거의 받지 못하고 있었다. 출산에 있어 높은 사망률과 유산, 조산율을 보이고 있는데, 이는 모체의 영양 불량상태와 임신 기간 중 과도한 노동의 결과였다. 특히 90%가 넘는 아동이 기생충을 보유하였는데, 상하수도 등의 위생 시설을 갖추지 못한 농촌지역의 현실을 반영한 것이다. 안병렬의 조사는 단순한 계량화로 환원될 수 없는 조선 농민의 다양한 삶의 양태를 보여주고 있다는 점에서 통치당국의 조사와는 질적으로 다른 의미와 내용을 가진 것이었다. In the summer of 1939, Byeong–ryeol Ahn, a student in the Department of Agriculture of Hokkaido Imperial University, examined the living environment, healthcare, and hygiene of residents in his hometown, Ogok–ri. He surveyed 61 households, and found the average number of residents in the average household was 6.8. Except for one landed farmer, all of the residents were tenant farmers. They were so heavily in debt that the average amount of debt per household was KRW 140. Among 7 to15 year–old–children, only 23% attended school, and each child was involved in more than three types of labor. Only 10% of clothes were wearable outside. Each person consumed only 0.4 seok of rice, below the average of Joseon. Houses were unsanitary due to a lack of ceilings and wallpaper, insufficient light, and poor ventilation. With the lack of medical facilities and the high medical expenses, resident were unable to enjoy the benefits of modern medicine. Maternal malnutrition and excessive physical labor during pregnancy led to high rates of death, miscarriages, and premature births. Parasites were found in more than 90% of children, which reflected the reality of rural areas without sanitary facilities such as water and proper sewage disposal. Ahn’s research differed qualitatively in its significance and content from that of the ruling government in that it showed various aspects of the lives of Joseon farmers that were not quantitatively measurable.

하나로 노심 특성 변화에 따른 Fission Moly 표적의 설계 평가

조동건,김명현 경희대학교 산학협력기술연구원 2001 산학협력기술연구논문집 Vol.7 No.-

A nuclear characteristics of Mo-99 target was evaluated according to the HANARO core models. Safety of core with fission moly target was evaluated to be assured with the fresh fuel loaded core model, because maximum core fuel temperature was maintained far below the limit of 485℃. Characteristics of design parameters evaluated from fresh fuel loaded core model was consistent to those evaluated from equilibrium core model. Impurity level in 99Mo solution was shown to be affected seriously by core condition. The choice of LEU fuel for target seems to be undesirable and should be examined in detail, because current Cintichem process technology does not satisfy the U.S.P. specification on the alpha impurity decontamination.

양파(Allium cepa L.) 추출물이 Tyrosinase 유전자 발현에 미치는 효과

조남철,윤연희,이혜진,손현정,김양경,최근희,나명석,조영권,이황희,진종언 한국식품영양학회 2001 韓國食品營養學會誌 Vol.14 No.3

Melanin 생성에 관여하는 tyrosinase 유전자의 발현을 억제하는 물질을 탐색하고자 tyrosinase promoter를 지닌 Bl6 mouse melanoma cell해 앙파 methanol 추출물을 처리한 바 양파 methanol 추풀물은 10.0㎍/ml, 100.0 ㎍/ml, 1.0 ㎎/ml의 농도에서 대조군에 비해서 약 15%, 23% 57%의 억제효과를 나타냈으며 세포생존율은 1.0 ㎍/ml, 10.0 ㎍/ml, I00.0 ㎍/ml, 1.0㎎/ml의 농도에서 약 126 %, 92%. 85%, 64%로서 세포독성이 낮게 나타났다. Ethyl acetate, butyl alcohol, 그리고 물 용매 분획물은 tyrosinase 유전자의 발현물 억제하는 효과가 없었지만 methylene chloride 용해 분획물은 10.0 ㎍/ml과 100.0 ㎍/ml의 농도에서 약 37%와 35%의 발현율을 나타냄으로서 대조군에 비해 크게 억제하였다. Onion(Allium cepa L,) extract by methanol repressed the expression of tyrosinase gene of B16 mouse melanoma cell containing tyrosinase promoter. 10.0 ㎍/ml, 100.0 ㎍/ml, 1.0 ㎎/ml of the extract repressed expression of tyrosinase gene about 15%, 23%, and 57%, respectively, compared with control. In the MTT assay, the same extract exhibited low cytotoxicity at 1.0 ㎍/ml, 10.0 ㎍/ml, 100.0 ㎍/ml, and 1.0 ㎎/ml, respectively. The fractions of ethyl acetate, butyl alcohol, and water did not showed the repressive effect on the expression of tyrosinase gene, but the fraction of methylene chloride repressed highly at 10.0 ㎍/ml and 100.0 ㎍/ml.

A7003 합금의 환경친화적 압출공정을 위한 Mg조성 및 공정비교 연구

조훈,조형호,한명근,김영직 한국전과정평가학회 2002 한국전과정평가학회지 Vol.4 No.1

최근 수송기계 경량화 추세에 부응하여 door impact beam, seat side rail 및 hood support와 같은 자동차 부품등에 Al-Mg-Zn계 중경질 A7003 합금소재의 적용이 검토되고 있는 실정이다. 그러나 이들 합금소재의 적용을 위해서는 제품의 용도와 특성을 만족함과 동시에 압출성이 높은 합금소재의 개발이 선행되어야 한다. 본 연구에서는 A7003 합금소재의 압출성을 향상시키기 위하여 합금원소 첨가량이 미세조직, 압출성 및 기계적 특성에 미치는 영향을 조사하였다. Mg조성 제어에 의해 기계적 강도의 저하없이 A7003 합금의 압출성을 향상시킬 수 있었다. 또한 MLCA 기법을 적용하여 A7003 합금중의 Mg 첨가량 및 빌렛가열공정 변화에 따른 에너지 소비량 및 환경오염부하물질 배출량을 산정하였다. A7003 합금중 Mg의 첨가량을 제어하여도 압출재 생산에 소요되는 에너지의 소비량은 거의 같음을 확인하였으며 CO₂와 같은 대기오염물질을 저감시키기 위해서는 유도가열에 의한 빌렛가열공정의 적용이 가장 효과적임을 알 수 있었다. A7003 alloy has characteristics of their excellent weldability, high corrosion resistance and superior plastic working however the broadening of application for the alloy has been hampered by the lower extrudability associated by Mg content. For improvement of extrudability and enhanced recovery efficiency during Al scrap recycling, it has been generally practiced to reduce Mg content in A7003 alloy. Therefore, it is necessary to investigate the influence of Mg content on mechanical strength and extrudability of A7003 alloy. For efficient material processing which has small amounts, material life cycle assessment(MLCA) is evaluated. The quantitative analysis of energy requirements and CO₂ emission for production of A7003 extruded bar are estimated with different Mg content and billet pre-heating process (heating source by light oil or LPG). In particular, the estimation of energy requirements was performed within shipping and gating range (except the mining and extraction stages) to investigate the influence of the variables on energy requirements and CO₂ emission in detail. As Mg content increased, the flow stress and the extrusion pressure for A7003 alloy increased. It has been thought that an increment in extrusion pressure with increasing Mg content is caused by the solid solution hardening of Mg atoms in the matrix and increment in volume fraction of intermetallic compound, Mg2Si. The extrudability and the tensile strength are equal to, or above that of conventional A7003 alloy even the content of Mg varied from 1.1wt.% to 0.5wt.%.alloy. This means that minimizing the content of Mg in A7003 alloy can enhance recovery efficiency during Al scrap recycling. It can be quoted that rather than Mg content energy source for billet heating is a prime factor to determine the atmospheric CO₂ emission.

六味知黃湯 投與가 高壓環境에 露出된 흰쥐의 血液造成과 臟器造織에 미치는 影響

오재근,강명신,조준용,이영일,최용어 韓國體育大學校附屬 體育科學硏究所 1996 韓國體育大學校附屬 體育科學硏究所論文集 Vol.15 No.1

This study was purposed to investigate the effect of yukmijihwangtang on rat blood components and organ histopathologic changes in the different environments of hyperbaric ambient air. The pharmacological effects of yukmijiwhangtang in oriental medicine have been reported to improve general condition and treat mental and physical weakness due to overload. 84 Male Sparague-Dawely rats, 200-250 g weight, were housed two per cage, fed Standard Rodent Diet with water ad libitum. The animals were assigned to 3 main groups for the blood components and gas analysis : normobaric control group (NC ; N=4), hyperbaric control group (HC ; N=8), hyperbaric medication group (HM ; N=8). HC and HM group were devided into 2 subgroups and kept on different situation of the hyperbaric ambient air (2ATA or 3ATA) for 2 hrs. HM group was administered 10cc extract of boiled yukmijiwhangtang before exposure. For histopathological analysis, hyperbaric groups(HC and HM : N=80) was further devided into 2 subgroups according to atmosphere absolute and exposure period : 2ATA (acute, 1, 2, 3, 4 wks), 3ATA (acute, 1, 2, 3, 4 wks). There were 20 groups in total, with 4 animals in each group. Experimental rats of HM group were administered 10cc extract of boiled yukmijiwhangtang 2 times per day and kept on situation of the hyperbaric ambient air (2ATA and 3ATA) 2 hrs per day for four weeks. In order to record the possible effects of yukmijiwhangtang in hyperbaric condition on the blood components, the rats were killed by decapitation directly after the hyperbaric exposure for 2 hrs. But the administered rats were killed on the morning following the last hyperbaric exposure during 4 wks. The samples were taken 2 hrs, 1, 2, 3, 4 wks after the begining of this study. Blood was collected from posterior abdominal vena cava immediately after decapitation. Organs for histopathological assays in hyperbaric groups (HC and HM) were also removed 2 hrs, 1, 2, 3, 4 wks and fixed at 10% formalin solution. The whole blood of 1㎖ was used for the analysis of pH, PO₂, PCO₂, HCO₃, BE, O₂CT, O₂SAT level by Blood Gas Autoanalyzer (Coning 175, U.S.A). And The rest whole blood of 1㎖ was utilized for the measurement of WBC (white blood cell), RBC (red blood cell), Hb (hemoglobin), Hct (hematocrit), MCV (mean corpuscular volume), MCH (mean corpuscular hemoglobin) level by Microcell Counter (Model; CC-170-TDA Co., Japan). Hematological and blood gas analysis and organ histopathological changes after exposure to hyperbaric ambient air were as follow; (1) Hematological parameters were lower in the hyperbaric medication group than all the control groups without WBC, MCV (2ATA) and MCV, MCH (3ATA). But a statistical significance among the groups was not shown. (2) The hyperbaric medication group was lower than another control groups on all parameters of blood gas analysis after 2 hours exposure to hyperbaric ambient air (2ATA and 3ATA) without O₂SAT. But a statistical significance among the groups was not shown. (3) On observing the histopathological system of the lung with microscope, the congestion, edema and hemorrhage on the alveolar sacs and alveolar wall damage in the hyperbaric control group were heavier than in the hyperbaric medication group.

화학공학 전공 학생의 취업을 위한 복합 STC 운영

이명섭,한정태,이근복,김노수,조찬휘 永同大學校 1997 硏究論叢 Vol.3 No.1

우리 영동대학교에서 1998년 이후 지금까지 진행하여 온 특별 주제 학습과정인 STC(Special Topics COurse)프로그램을 기존의 운영틀에서 탈피하여 한층 더 발전시킨 복합STC로 활용하고자 하였으며, 특히 이를 졸업생의 취업 및 진학의 방법으로 최대한 활용하고자 계획·운영하였다. 그 결과 취업 및 진학과 같은 진로 확립은 물론 전공지식의 확대, 자격시험 대비능력의 향상, 학생과 교수간의 유대강화 등과 같은 괄목할 만한 성과를 얻을 수 있었으며, 교수들의 산업체 방문을 통한 산학협동의 계기 마련에도 커다란 성과를 얻었다. We have upgraded the STC(Special Topics Course) program, which has been carried out in our university since 1995, to more structured program so that we could train our chemical engineering students better. This program was geared to help students find better jobs and enter well-recognized graduate schools. Consequently, we had most students successful in job searches as well as entrance exams for graduate school; besides, those who actively participated in our STC program were able to attain better professional knowledge and acquire various professional engineers certificates. On top of that, this program allowed us to build up closer relationships with our students. We also made university-industry cooperation possible through our visits to industries nearby.

갑상선 초음파검진의 유용성

배오근,김재권,강명순,조영익,김임봉,신유진,임성규,서민호 한국건강관리협회 2000 건협 Report Vol.3 No.-

중·고등학교 아랍어 교재 집필 및 교재 내용에 관한 연구 보고서

오명근,송경숙,전완경,사희만,이규철,조희선,정규영,최진영 한국아랍어아랍문학회 1999 아랍어와 아랍문학 Vol.3 No.1

소아에서 출혈을 동반한 단일 연소성 용종의 내시경적 절제술

김준기,조상욱,신성하,고영춘,최정영,서강석,강명원,임연근,여향순,김경수 全南大醫大 2001 전남의대학술지 Vol.37 No.3

상아질 접착제의 중합 시간 조절에 따른 복합레진의 중합 수축 방향의 변화

배지현,오명환,김창근,손호현,엄정문,조병훈,권혁춘 대한치과보존학회 2001 Restorative Dentistry & Endodontics Vol.26 No.4

The purpose of this study was to evaluate the effect of adhesive curing timing on the direction of polymerization shrinkage of light-curing composite resin. In this study, the curing times of adhesive and composite resin were measured by differential scanning calorimeter(DSC). 28 extracted human molars were embedded in clear resin and box-type cavities were prepared. Based on DSC data. the experimental teeth were divided into 4 groups. Group 1: no bond: Group 2: late curing: Group 3: Intermediate curing: Group 4: Early curing. After treating with adhesive, the buccal cavities were filled with Z-100 hybrid composite resin and the lingual ones were filled with AEliteflo flowable composite resin. The depressions at the surface were measured by surface profilometer, then the specimens were embedded in clear resin and sectioned. Impressions were obtained and used to get epoxy resin replicas. The epoxy replicas were gold-coated and observed under SEM. Average Maximum Gap(AMG), Gap Proportion(GP), Average Marginal Index(AMI) were used to compare the shrinkage gap of each group. The results were statistically analyzed using the Kruskal-Wallis One Way ANOVA, Student-Newman-Keuls method. The results of this study were as follows. 1. Average Maximum Gap. Gap Proportion, Average Marginal Index and depression at the surface of Z-100 hybride composite resin were smailer than those of AEliteflo flowable composite resin(P(0.05) 2. When the bonding between composite resin and tooth structure was strong, the shrinkage gap was small, and depression at the surface was deep(P<0.05). 3. In the well-bonded group. light-curing composite resin shrank toward bonded cavity wall. not toward light source. The result suggested that the direction of polumerization shrinkage was affected by the quality of bonding in the dentin-resin interface. The strong was the bonding between composite resin and tooth structure, the smaller was the gap and the deeper was the depression at the surface. Then the flow to compensate the polymerization shrinkage proceeded from surface to bonded cavity wall.