http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동자의 무게 저감을 고려한 원통형 선형 발전기의 개발
임재원(Jaewon Lim),이경표(kyung-Pyo Yi),정현교(Hyun-Kyo Jung) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.10
본 논문에서는 수소 연소 동력 발전 시스템용 원통형 선형 발전기의 개발에 대하여 기술한다. free piston 엔진용 선형발전기는 기계적인 특성상 이동자의 무게 절감이 절대적으로 중요한 역할을 한다. 발전기의 성능을 보장하연서 이동자의 무게를 저감하는 설계안에 대해 기술하며 발전기의 전자기적 특성은 유한요소법을 이용하여 해석하였다.
고속 전철용 매입형 영구자석 전동기의 풍량에 따른 열해석
임재원(Lim Jaewon),이경표(Yi Kyung-Pyo),정현교(Jung Hyun-Kyo) 한국철도학회 2010 한국철도학회 학술발표대회논문집 Vol.2010 No.7
Recently, Interior Permanent Magnet Machine(IPM) is widely used for traction motor in the high speed train. Higher efficiency and power density are the superb performance of IPM. Due to the high power density, however, it has lots of heat source which are originated from copper losses and core losses. These heat source can cause the permanent demagnetization in magnet and the loss of torque and power. To prevent the undesirable loss in the traction motor, the accurate loss calculation and the thermal analysis should be preceded. Especially, the end-winding area and permanent magnet area should be examined correctly. In this paper, the electromagnetic fields were examined by finite element method to analyze the electromagnetic properties of IPM and thermal analysis are carried out with pre-calculated losses. To validate the analysis result, the experiment set with forced air cooling system is manufactured.
초음속 제트기 양항비 향상을 위한 주날개 형상 변화에 관한 수치해석적 연구
표기열(Kiyeol Pyo),박재원(Jaewon Park),윤성현(Sunghyun Yun),송시몬(Simon Song) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
Lift to drag ratio is one of the important factors in improving jet performance. To increase the lift to drag ratio, it is necessary to reduce the resistance with the air and to change the shape of the wing well so that the flow separation does not occur easily. In this study, to increase the lift to drag ratio, the effect of the shape of the wing is confirmed using numerical analysis. We observe the difference in lift to drag ratio while changing the position of the string length and maximum thickness. As a result, the shorter the string length and the farther the maximum thickness from the leading edge, the higher the lift to drag ratio.
홍준기 ( Junki Hong ),유재원 ( Jaewon You ),유장영 ( Jangyung Yoo ),남승옥 ( Seungok Nam ),이상길 ( Sanggil Lee ),표형배 ( Hyeongbae Pyo ) 대한화장품학회 2013 대한화장품학회지 Vol.39 No.2
수성 이상계는 물에 친수 성분만을 용해시킨 후 용해 물질들 사이에 유발되는 단순한 물리적 불친화성에 의해 액상 다중 층으로 분리되기 때문에 생체적합성에 대한 장점을 가지고 있다. 본 연구에서는 물에 친수 성분만을 용해시킨 후 두 층으로 분리되는 수성 이상계 상분리 원리를 수성 다중 층 액상 화장료에 응용하여 수성다중 층 화장료에 적용이 가능한 대표적인 두 종의 수성 이상계를 선정하였으며, 이들에 대해 바이노달 곡선과 임계점 및 농도 대응선 그리고 새로운 개념의 상분리 부피 및 상분리 시간 대응곡선을 포함하는 상도를 실험을 통해 작성하였으며, 상 도표로부터 액상 다중 층으로 분리되는 최적의 조건을 관찰할 수 있었다. The aqueous two phase system has biocompatibility, because it is physically separated into an immiscible liquid multi-layer induced by incompatibility among hydrophilic components dissolved in the water phase. we have applied this principle to aqueous multi-layer liquid cosmetics and select two representative systems. What it was experimentally obtained was the phase diagrams including a binodal curve, a critical point, tie lines of concentration and tie curves of phase separating volume ratio and phase separating time. From the phase diagrams, we were able to observe existence of the optimum condition to prepare the aqueous multi-layer cosmetics for the systems.