http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유병우(B.W. Ryu),한정만(J.M. Han),이동욱(D.W. Lee),이종달(J.D. Lee),이병희(B.H. Lee),최성욱(S.W. Choi),문건우(G.W. Moon) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.1
최근 LCD 모니터, Note PC, 가정용 게임기, Mobile Phone, MP3 등의 소형 전자 제품의 사용이 증가함에 따라 이들 전자제품의 전원 공급에 필요한 다양한 AC/DC 어댑터가 요구된다. AC/DC 어댑터는 밀폐형의 구조를 가지므로, 열적인 문제 때문에 용량과 사이즈가 제한되어 왔다. 하지만 최근에는 소형전자제품의 용량이 점차 증가하고, 더불어 소비자의 휴대성 및 심미적 요구에 부응하기 위하여 소형 및 경량의 고밀도 AC/DC Adapter를 개발하여야 한다. 이를 위해서 높은 수준의 회로 설계 및 방열 기술이 필요하다. 본 논문에서는 Laptop PC에 적용되는 85W급 AC/DC Adapter용 고밀도전원을 개발하고 실험으로 검증하였다.
Shen, T.,Park, K.t.,Choi, J.g.,Moon, B.W.,Koo, J.M.,Seok, C.S. Pergamon Press 2017 Engineering fracture mechanics Vol.169 No.-
<P>The leak-before-break (LBB) concept was usually applied to design and estimate the piping system in nuclear power plant, which is based on the fracture resistance (J-R) curves of nuclear real pipe. However, the real pipe test is costly and difficult. Instead of the real pipe test, the J-R curves of standard specimens suggested in the ASTM El 820 were used. Nonetheless, the J-R curves obtained from the standard specimens are too conservative, owing to the differences in specimen geometries and loading configurations (constraint effect). Thus, in this study the equivalent stress gradient (curved ESG) specimens were developed to evaluate the J-R curves of nuclear real pipes (SA-312 TP304L) precisely. The curved ESG specimens were designed to show the same crack-opening stress gradients as those of the real pipes at the driving force J = J(Ic). The J(Ic) for stainless steel SA-312 TP304L was obtained by the J-R tests on standard compact tension (CT) specimens. Comparison of the J-R curves obtained from the curved ESG specimens and those obtained from the real pipes show that the curved ESG specimen can be used in the LBB concept to design and estimate the piping systems. (C) 2016 Elsevier Ltd. All rights reserved.</P>
차세대 리소그래피 빛샘 발생을 위한 플라스마 집속장치의 아르곤 아크 플라스마의 방출 스펙트럼 진단
홍영준,문민욱,이수범,오필용,송기백,홍병희,서윤호,이원주,신희명,최은하,Hong, Y.J.,Moon, M.W.,Lee, S.B.,Oh, P.Y.,Song, K.B.,Hong, B.H.,Seo, Y.H.,Yi, W.J.,Shin, H.M.,Choi, E.H. 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.6
차세대 리소그래피 기술인 극자외선(EUV : Extreme Ultraviolet) 빛샘 연구의 기초단계로써, 동축타입의 전극구조가 설치된 다이오드 챔버를 통해 Ar 플라스마를 생성하였으며, 방출 분광기술(emission spectroscopy)를 이용하여 방출된 가시광선 영역의 빛을 조사하였다. 장치의 입력 전압을 0.5kV씩 변화를 주어 $2\sim3.5kV$까지 인가를 했으며 이극챔버의 최적 압력인 330mTorr 일 때 각 전압에 따른 방출 분광선 데이터를 얻었다. 이때 Ar I과 Ar II 방출선을 관측하였으며 국소적인 열적평형 (LTE ; Local Thermodynamic Equilibrium) 상태의 가정 하에 볼츠만 도표(Boltzmann plot)와 사하(Saha) 방정식을 이용해 Ar I 및 Ar II의 전자온도와 이온 밀도를 각각 계산하였다. 각 입력전압에 대해 이온밀도는 Ar I과 Ar II에서 각각 $\sim10^{15}/cc$ 및 $\sim10^{13}/cc$의 값으로 계산되었다. We have generated the argon plasma in the diode chamber based on the established coaxial electrode type and investigated the emitted visible light for emission spectroscopy. We applied various voltages $2\sim3.5kV$ to the device by 0.5kV, and obtained the emission spectrum data for the focused plasma in the diode chamber on the argon pressure of 330 mTorr. The Ar I and Ar II emission line are observed. The electron temperature and ion density have been measured by the Boltzmann plot and Saha equation from assumption of local thermodynamic equilibrium (LTE) The Ar I and Ar II ion densities have been calculated to be $\sim10^{15}/cc\;and\;~10^{13}/cc$, respectively, from Saha equation.
Hgo07Cd0.3Te 박막의 LPE 성장시 성장시간에 따른 표면형상의 변화
김재묵,송원준,서상희,임성욱,최인훈,문성욱 대한금속재료학회(대한금속학회) 1990 대한금속·재료학회지 Vol.28 No.2
HgCdTe is the most widely used material for infrared photodetectors. HgCdTe epi-layers were grown on CdTe substrates with (111) orientation, using a slider LPE(Liquid Phase Epitaxy) technique. The change of surface morphology during LPE growth of Hg_(0.7)Cd_(0.3)Te was investigated. The wave-like surface at the initial stage of growth has transformed gradually to the terrace-like surface and the terrace width has increased with increasing growth time. Infrared tansmission was used to determine the composition of HgCdTe epi-layers.
멤브레인형 LNG 선박 화물탱크 Vent Exits의 최소 높이에 대한 적합성 연구
강호근(H.K. Kang),오주원(J.W. Oh),문준식(J.S. Moon),장재식(J.S. Jang),정기화(K.W. Jeong),이상수(S.S. Lee),최종웅(J.W. Choi) 한국마린엔지니어링학회 2009 한국마린엔지니어링학회 학술대회 논문집 Vol.2009 No.-
현 IGC 코드의 멤브레인형 LNG선박의 화물탱크에 설치되는 vent 출구의 높이는 노출갑판상 B/3 또는 6m 중 큰 것 이상으로 하고 작업구역 및 전후부 통행로, 갑판상의 저장탱크 및 화물설계액위 보다 6m 이상 높게 설치하여야 한다. 때문에 높은 vent riser로 인하여 작업의 어려움 및 wheel house에서의 견시요원의 전방 시야를 방해하는 등 항해의 어려움을 초래한다. 본 연구에서는 현 화물탱크의 vent 출구의 높이에 대한 적합성 평가를 수행하며 IGC 코드 개정작업의 기초자료를 제시한다.
우정욱(J.W. Woo),곽주식(J.S. Kwak),심응보(E.B. Shim),원봉주(B.J. Won),문재덕(J.D. Moon) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the shut down of electricity and the electro-magnetic interference. Because of this reason. we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. A lightning detection system, LPATS, has been operated since 1995 in KEPCO. For the improved detection efficiency, we had in stalled the new lightning detection network named as KLDNet in 2005. Also, we had developed the new software for the lightning parameters analysis and real time information service on the WEB. In this paper. we would like to introduce about the new system.